DG9636 Vishay Siliconix Dual SPDT Analog Switch DESCRIPTION FEATURES The DG9636 is a CMOS, dual SPDT analog switch designed to operate from + 2.7 V to + 12 V, single supply. All control logic inputs have a guaranteed 1.65 V logic HIGH threshold when operation from a + 12 V power supply. This makes the DG9636 ideally suited to interface directly with low voltage micro-processor control signals. Processed with high density CMOS technology, the DG9636 has a 83 Ω channel ON resistance while providing ultra low parasitic capacitance of 2 pF for CS(OFF) and 7 pF for CD(ON). Other performance features are: 720 MHz - 3 dB bandwidth, - 67 dB Cross Talk and - 58 dB Off isolation at 10 MHz frequency. Key applications for the DG9636 are logic level translation, pulse generator, and high speed or low noise signal switching in precision instrumentations and portable device designs. The DG9636 is available in space saving 1.4 mm x 1.8 mm miniQFN10 package. • • • • • • • As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with lead (Pb)-free device termination. The miniQFN-10 package has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free "-E4" suffix to the ordering part number. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and MSL rating. • • • • Leakage current < 0.5 nA max. at 85 °C Low switch capacitance (Csoff, 2 pF typ.) RDS(on) - 83 Ω max. RoHS Fully specified with single supply operation at 12 V COMPLIANT Low voltage, 1.65 V CMOS/TTL compatible 720 MHz, - 3 dB bandwidth Excellent isolation and crosstalk performance (typ. > - 60 dB at 10 MHz) Fully specified from - 40 °C to 85 °C and - 40 °C to + 125 °C Latch-up current 300 mA per JESD78 Lead (Pb)-free low profile miniQFN-10 (1.4 mm x 1.8 mm x 0.55 mm) Compliant to RoHS Directive 2002/95/EC APPLICATIONS • • • • • • High-end data acquisition Medical instruments Precision instruments High speed communications applications Automated test equipment Sample and hold applications FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG9636 miniQFN - 10L S2A 7 S2B 6 V+ 8 A1 9 5 D2 4 D1 Logic 3 S1B A0 10 1 Pin 1: LONG LEAD 2 GND S1A Top View Yx Pin 1 Device marking: Yx for DG9636 x = Date/Lot Traceability Code TRUTH TABLE Selected Input On Switches A1 A0 DG9636 X 0 D1 to S1A X 1 D1 to S1B 0 X D2 to S2A 1 X D2 to S2B Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 www.vishay.com 1 DG9636 Vishay Siliconix ORDERING INFORMATION Temp. Range - 40 °C to 125 °C Package 10 pin miniQFN Part Number DG9636EN-T1-E4 - 40 °C to 85 °C 10 pin miniQFN DG9636DN-T1-E4 Notes: • - 40 °C to 85 °C datasheet limits apply. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Limit V+ to GND 14 Digital Inputsa, VS, VD Unit V (V+) + 0.3 or 30 mA, whichever occurs first Continuous Current (Any Terminal) 30 Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle) 100 Storage Temperature mA - 65 to 150 °C Power Dissipation (Package)b 10 pin miniQFNc, d 208 mW Thermal Resistance (Package)b 10 pin miniQFN 357 °C/W Notes: a. Signals on SX, DX, or AX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 2.6 mW/°C above 70 °C. d. Manual soldering with iron is not recommended for leadless components. The miniQFN-10 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. SPECIFICATIONS FOR DUAL SUPPLIES Parameter Test Conditions Unless Otherwise Specified V+ = 12 V, VA0, A1 = 1.65 V, 0.5 Va Temp.b VANALOG Full RDS(on) IS = 1 mA, VD = + 11.3 V Room Full 83 ΔRON IS = 1 mA, VD = + 11.3 V Room Full 2 4 9 4 6 Room Full 33 45 55 45 50 Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 V+ = 12 V, VD = VS 11 V/1 V Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Symbol - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d Max.d Unit 12 12 V 110 140 110 125 Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current Channel On Leakage Current RFLATNESS IS = 1 mA, VD = 0.7 V, 6.5 V, 11.3 V IS(off) ID(off) ID(on) V+ = 12 V, VD = 1 V/11 V, VS = 11 V/1 V Ω nA Digital Control Input Current, VIN Low IIL VAX = 0.5 V Full 0.005 - 0.1 0.1 - 0.1 0.1 Input Current, VIN High IIH VAX = 1.65 V Full 0.005 - 0.1 0.1 - 0.1 0.1 Input Capacitancee CIN f = 1 MHz Room 3 Room Full 30 70 90 70 80 Room Full 15 55 75 55 65 Room Full 15 µA pF Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make tBBM RL = 300 Ω, CL = 35 pF see figure 1, 2 5 2 ns 5 2 Charge Injectione QINJ Vg = 0 V, Rg = 0 Ω, CL = 1 nF Room 23.5 Off Isolatione OIRR RL = 50 Ω, CL = 5 pF, f = 10 MHz Room - 58 dB BW RL = 50 Ω Room 720 MHz XTALK RL = 50 Ω, CL = 5 pF, f = 10 MHz Room - 67 dB Bandwidthe Channel-to-Channel Crosstalke www.vishay.com 2 pC Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 DG9636 Vishay Siliconix SPECIFICATIONS FOR DUAL SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified V+ = 12 V, VA0, A1 = 1.65 V, 0.5 Va - 40 °C to 125 °C - 40 °C to 85 °C Temp.b Typ.c Room 2 Room 7.7 Room 0.01 Room Full 0.001 Room Full - 0.001 Min.d Max.d Min.d Max.d Unit Dynamic Characteristics Source Off Capacitancee Channel On Capacitancee Total Harmonic Distortione CS(off) CD(on) THD f = 1 MHz Signal = 1 VRMS, 20 Hz to 20 kHz, RL = 600 Ω pF % Power Supplies Power Supply Current I+ VIN = 0 V, or V+ Ground Current IGND 0.5 1 - 0.5 -1 0.5 1 - 0.5 -1 µA SPECIFICATIONS FOR SINGLE SUPPLY Parameter Test Conditions Unless Otherwise Specified V+ = 5 V, VA0, A1 = 1.4 V, 0.5 Va Temp.b VANALOG Full RDS(on) IS = 1 mA, VD = + 3.5 V Room Full 120 ΔRON IS = 1 mA, VD = + 3.5 V Room Full 3 5 12 5 10 Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Symbol - 40 °C to 125 °C - 40 °C to 85 °C Typ.c Min.d Max.d Min.d Max.d Unit 5 5 V 170 250 170 200 Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match Switch Off Leakage Current IS(off) ID(off) V+ = 5.5 V, VD = 1 V/4.5 V, VS = 4.5 V/1 V ID(on) V+ = 5.5 V, VS = VD = 1 V/4.5 V Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Input Current, VIN Low IL VAX = 0.5 V Full 0.005 - 0.1 0.1 - 0.1 0.1 Input Current, VIN High IH VAX = 1.4 V Full 0.005 - 0.1 0.1 - 0.1 0.1 CIN f = 1 MHz Room 3 Room Full 55 Room Full 30 Room Full 36 Channel On Leakage Current Ω nA Digital Control Input Capacitance µA pF Dynamic Characteristics Turn-On Time tON Turn-Off Time tOFF Break-Before-Make-Time tBMM RL = 300 Ω, CL = 35 pF see figure 1, 2 Charge Injectione QINJ Off-Isolatione OIRR Crosstalke XTALK Bandwidthe BW THD f = 1 MHz Room Total Harmonic Distortione Source Off Capacitancee Channel On Capacitancee CL = 1 nF, RGEN = 0 Ω, VGEN = 0 V Full 10 Room - 58 Room - 68 RL = 50 Ω Room 610 MHz Signal = 1 VRMS, 20 Hz to 20 kHz, RL = 600 Ω Room 2.2 % f = 10 MHz, RL = 50 Ω, CL = 5 pF pC dB 2.1 CS(off) CD(on) ns pF 8.1 Power Supplies Power Supply Current I+ VIN = 0 V, or V+ Ground Current Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 IGND Room Full 0.001 Room Full - 0.001 0.5 1 - 0.5 -1 0.5 1 - 0.5 -1 µA www.vishay.com 3 DG9636 Vishay Siliconix SPECIFICATIONS FOR SINGLE SUPPLY - 40 °C to + 125 °C - 40 °C to + 85 °C Test Conditions Unless Otherwise Specified V+ = 3 V, VA0, A1 = 1.4 V, 0.5 Va Temp.b VANALOG Full RDS(ON) IS = 1 mA, VD = + 1.5 V Room Full 200 On-Resistance Match ΔRON IS = 1 mA, VD = + 1.5 V Room Full 5 6 13 6 11 Switch Off Leakage Current (for 16 pin miniQFN) IS(off) Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Parameter Symbol Typ.c Min.d Max.d Min.d Max.d Unit 3 3 V 245 325 245 290 Analog Switch Analog Signal Rangee On-Resistance ID(off) Channel On Leakage Current (for 16 pin miniQFN) V+ = 3.3 V, V- = 0 V VD = 1 V/3 V, VS = 3 V/1 V ID(on) V+ = 3.3 V, V- = 0 V, VS = VD = 1 V/3 V Room Full ± 0.01 -1 - 18 1 18 -1 -2 1 2 Input Current, VIN Low IL VAX = 0.5 V Full 0.005 - 0.1 0.1 - 0.1 0.1 Input Current, VIN High IH VAX = 1.4 V Full 0.005 - 0.1 0.1 - 0.1 0.1 CIN f = 1 MHz Room 3.1 Room Full 96 Room Full 60 Room Full 77 Ω nA Digital Control Input Capacitance µA pF Dynamic Characteristics Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-MakeTime tBMM RL = 300 Ω, CL = 35 pF see figure 1, 2 Charge Injectione QINJ Off-Isolatione OIRR Crosstalke XTALK Bandwidthe BW THD f = 1 MHz Room Total Harmonic Distortione e Source Off Capacitance Channel On Capacitancee CL = 1 nF, RGEN = 0 Ω, VGEN = 0 V Full 6.6 Room - 57 Room - 69 RL = 50 Ω Room 525 MHz Signal = 1 VRMS, 20 Hz to 20 kHz, RL = 600 Ω Room 2.2 % f = 10 MHz, RL = 50 Ω, CL = 5 pF pC dB 2.1 CS(off) CD(on) ns pF 8.3 Power Supplies Power Supply Current I+ VIN = 0 V, or V+ Ground Current IGND Room Full 0.001 Room Full - 0.001 0.5 1 - 0.5 -1 0.5 1 - 0.5 -1 µA Notes: a. VIN = input voltage to perform proper function. b. Room = 25 ºC, Full = as determined by the operating temperature. c. Typical value are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet. e. Guaranteed by design, not subject to production test. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 4 Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 DG9636 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 500 350 T = 25 °C IS = 1 mA VCC = 2.7 V 300 + 85 °C + 25 °C + 125 °C - 40 °C 400 RON - On-Resistance () VCC = 3.0 V RON - On-Resistance () V+ = 3.0 V IS = 1 mA 450 250 200 VCC = 5.0 V 150 VCC = 12.0 V 100 VCC = 10.8 V 350 300 250 200 150 100 50 50 VCC = 13.2 V 0 0 0 2 4 6 8 10 12 14 0 0.5 1 On-Resistance vs. Single Supply Voltage 2 2.5 3 On-Resistance vs. Analog Voltage and Temperature 350 150 V + = 12.0 V IS = 1m A V+ = 5.0 V IS = 1 mA 125 + 125 °C + 85 °C + 25 °C - 40 °C 250 RON - On-Resistance () 300 RON - On-Resistance () 1.5 VD - Analog Voltage (V) VD - Analog Voltage (V) 200 150 100 + 25 °C + 85 °C + 125 °C 100 - 40 °C 75 50 25 50 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 1 2 3 VD - Analog Voltage (V) 4 5 6 7 8 9 10 11 12 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature On-Resistance vs. Analog Voltage and Temperature 100 µA 10 000 V+ = +12.0 V V+ = 13.2 V 1000 1 µA Leakage Current (pA) Supply Current (A) 10 µA 100 nA IGND I+ 1 nA 100 pA ID(off) 100 IS(off) ID(on) 10 10 pA 1 pA 10 100 1K 10K 100K 1M 10M Input Switching Frequency (Hz) Supply Current vs. Input Switching Frequency Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 1 - 60 - 40 - 20 0 20 40 60 80 100 120 140 Temperature (°C) Leakage Current vs. Temperature www.vishay.com 5 DG9636 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 25 0 LOSS - 10 V+ = 12.0 V RL = 50 15 Q - Charge Injection (pC) LOSS, OIRR, XTALK (dB) - 20 - 30 - 40 - 50 - 60 XTALK OIRR - 70 V+ = 12.0 V 10 5 0 -5 V+ = 3.0 V - 10 V+ = 5.0 V - 80 - 15 - 90 - 20 - 100 100K T = 25 °C CL = 1 nF 20 - 25 1M 10M 100M 0 1G 1 2 3 4 5 6 7 8 9 10 11 12 VS - Analog Voltage (V) Frequency (Hz) Insertion Loss, Off-Isolation, Crosstalk vs. Frequency Charge Injection vs. Analog voltage 1.4 Vth - Switching Threshold (V) 1.3 1.2 VIH 1.1 1.0 0.9 VIL 0.8 0.7 0.6 0.5 0.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 V+ - Supply Voltage (V) Switching Threshold vs. Supply Voltage www.vishay.com 6 Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 DG9636 Vishay Siliconix TEST CIRCUITS V+ A0 or A1 V+ S1A or S2A 50 Ω t r < 5 ns t f < 5 ns VCC V+ 50 % VAX 0V S1B or S2B VS1A or VS2A D1 or D2 GND 300 Ω 90 % 90 % VO VO 50 % 35 pF 0V t OFF t ON S1A or S2A ON Figure 1. Enable Switching Time V+ tr < 5 ns tf < 5 ns VCC V+ SxA - SxB A0 50 Ω V+ 50 % VA0,A1 0V A1 VSxA or VSxB 80 % VO D1 or D2 GND VO 300 Ω 35 pF 0V tD Figure 2. Break-Before-Make V+ t r < 5 ns t f < 5 ns V+ VCC A0 or A1 VAX OFF ON OFF 0V Rg SxA or SxB VO Vg GND ΔVO VO D1 or D2 CL 1 nF Charge Injection = ΔVO X CL Figure 3. Charge Injection Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 www.vishay.com 7 DG9636 Vishay Siliconix TEST CIRCUITS V+ V+ Network Analyzer V+ V+ A0 or A1 Network Analyzer V+ VIN VIN A0 S1A or S2A Vg Rg = 50 Ω SxA or SxB A1 VOUT VOUT D1 or D2 D1 or D2 GND 50 Ω Insertion Loss = 20 log Rg = 50 Ω Vg GND VOUT 50 Ω Off Isolation = 20 log VIN VOUT VIN Figure 5. Off-Isolation Figure 4. Insertion Loss V+ V+ Network Analyzer V+ A0 or A1 V+ S1A or S2A VIN V+ Vg Rg = 50 V+ A0 or A1 D1 or D2 VOUT S1A or S2A | to | S2A or S2B Impedance Analyzer S1B or S2B 50 Ω GND D1 or D2 50 Ω GND Cross Talk = 20 log VOUT VIN Figure 6. Crosstalk V- V- Figure 7. Source/Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65159. www.vishay.com 8 Document Number: 65159 S10-2012-Rev. B, 06-Sep-10 Package Information Vishay Siliconix MINI QFN-10L CASE OUTLINE DIM MILLIMETERS INCHES MIN. NAM. MAX. MIN. NAM. MAX. A 0.50 0.55 0.60 0.0197 0.0217 0.0236 A1 0.00 - 0.05 0.000 - 0.002 b 0.15 0.20 0.25 0.006 0.008 0.010 c 0.15 REF 0.006 REF D 1.75 1.80 1.85 0.069 0.071 0.073 E 1.35 1.40 1.45 0.053 0.055 0.057 e 0.40 BSC 0.016 BSC L 0.35 0.40 0.45 0.014 0.016 0.018 L1 0.45 0.50 0.55 0.0177 0.0197 0.0217 ECN T-07039-Rev. A, 12-Feb-07 DWG: 5957 Document Number: 74496 12-Feb-07 www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1