751AM

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOIC-16 NB, LESS PIN 13
CASE 751AM-01
ISSUE O
DATE 20 AUG 2007
SCALE 1:1
D
16
A B
9
E
H
0.25
M
B
M
1
L
8
e
b
15X
C
C
DIM
A
A1
b
C
D
E
e
H
h
L
M
15X
0.25
M
T A
S
B
S
A1
SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE PROTRUSION SHALL BE
0.13 TOTAL IN EXCESS OF THE b DIMENSION AT
MAXIMUM MATERIAL CONDITION.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
PROTRUSIONS.
5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
h x 45 _
A
M
GENERIC
MARKING DIAGRAM*
SOLDERING FOOTPRINT
16
6.40
15X
1
MILLIMETERS
MIN
MAX
1.35
1.75
0.10
0.25
0.35
0.49
0.19
0.25
9.80
10.00
3.80
4.00
1.27 BSC
5.80
6.20
0.25
0.50
0.40
1.25
0_
7_
XXXXXXXXXG
AWLYWW
1.12
16
1
15X
0.58
1.27
PITCH
8
9
XXXXX
A
WL
Y
WW
G
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb-Free Package
*This information is generic. Please refer
to device data sheet for actual part
marking. Pb-Free indicator, “G”, may
or not be present.
DIMENSIONS: MILLIMETERS
DOCUMENT NUMBER:
STATUS:
98AON25333D
ON SEMICONDUCTOR STANDARD
NEW STANDARD:
© Semiconductor Components Industries, LLC, 2002
October, DESCRIPTION:
2002 - Rev. 0
http://onsemi.com
SOIC-16 NB, LESS PIN 13
1
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
Case Outline Number:
PAGE 1 OFXXX
2
DOCUMENT NUMBER:
98AON25333D
PAGE 2 OF 2
ISSUE
O
REVISION
RELEASED TO PRODUCTION. REQ. BY S. BROW.
DATE
20 AUG 2007
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© Semiconductor Components Industries, LLC, 2007
August, 2007 - Rev. 01O
Case Outline Number:
751AM