Polarization Insensitive Fiber Isolator (Dual Stage) OIDS Series Product Description Oplink’s OIDS is a dual stage optical isolator that minimizes back reflection and back scattering in the reverse direction for any state of polarization. The OIDS is a low cost model with excellent performance including low insertion loss, high isolation, high return loss, low polarization dependent loss (PDL) and low polarization mode dispersion (PMD). 34.0 mm Ø 5.5 mm Performance Specificationns OIDS Series Features Premium Operating Wavelength Range Grade A 1310 ± 15 1480 ± 15 C-band: 1528 ~ 1564 L-band: 1570 ~ 1605 Unit nm < 0.8 < 0.9 dB < 0.25 < 0.3 dB Minimum Isolation (over operating wavelength range, 23°C, all SOP) > 45 > 43 dB Minimum Isolation (over operating wavelength range, 0~70°C, all SOP) > 34 > 32 dB Polarization Dependent Loss < 0.1 < 0.15 dB Polarization Mode Dispersion < 0.05 < 0.05 ps Insertion Loss [1] Wavelength Dependent Loss Return Loss (Input/Output Ports) Maximum Power Handling Fiber Type Wide Operating Wavelength Range and Temperature Range Low Insertion Loss High Isolation Ultra Low PDL & PMD Highly Stable & Reliable Epoxy-free Optical Path Applications > 60/55 dB Fiberoptic Amplifiers < 500 mW CATV Fiberoptic Links WDM Systems Corning SMF-28 0 to +70 °C Fiberoptic Instruments Storage Temperature -40 to +85 °C Transmitters and Fiber Lasers Package Dimension P1: (ø) 5.5 x (L) 34.0 mm Operating Temperature [3] Laboratory R&D The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are excluding connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified. [1] S0054 - R02. 20100618 Polarization Insensitive Fiber Isolator (Dual Stage) OIDS Series Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. OIDS 0 0 Wavelength Fiber Length 1310 nm= 1310 1480 nm= 1480 1550 nm= 1550 1585 nm= 1585 1.0 Meter = 1 * 1.5 Meters = 5 2.0 Meters = 2 Grade 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com 1 Fiber Type Premium = P A Grade = A 250μm SMF-28 = 1 900μm tight buffer = 5 Package Type Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A P1 = 1 *1 meter is standard. The lead-time for special fiber length will be longer. S0054 - R02. 20100618 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules