BFIH S0002

Band Pass Filter/Isolator Hybrid
Combination
BFIH Series
Product Description
Oplink’s BFIH is a compact combination of a bandpass filter and a polarization insensitive optical isolator. The built-in bandpass filter blocks the amplifiers
spontaneous emission (ASE) in the erbium doped fiber amplifier (EDFA), thus
significantly improving the amplifier’s performance.
Features
Performance Specificationns
BFIH Series
Type A
Single
Stage
Isolator Stage
Operating
Wavelength
Range
Type B
Dual
Stage
Single
Stage
Unit
Dual
Stage
1528~1563
1547.5~1563.5
nm
Rejection Channel
1450~1495
1450~1540
dB
[1]
< 0.8
Rejection Channel Insertion Loss
Reverse Direction Isolation (over pass
channel wavelength range 0~70°C, all SOP)
< 1.0
< 0.9
> 30
< 1.1
> 25
> 21
> 36
 Compact Size
 High Isolation
Pass Channel
Pass Channel Insertion Loss
 Wide Operating Wavelength Range
dB
 Ultra Low PDL & PMD
 Highly Stable & Reliable
 Epoxy-free Optical Path
dB
> 21
> 36
dB
Wavelength Dependent Loss
< 0.3
< 0.4
< 0.3
< 0.4
dB
Polarization Dependent Loss
< 0.15
< 0.2
< 0.15
< 0.2
dB
Applications
Polarization Mode Dispersion
< 0.25
< 0.05
< 0.25
< 0.05
dB
 Fiberoptic Amplifiers
Return Loss
> 55
Maximum Power Handling
< 500
Fiber Type
Operating Temperature
Storage Temperature
Package Dimensions [3]
mW
Corning SFM-28
0 to +70
°C
-40 to +85
°C
P1: (ø) 5.5 x (L) 34.0
mm
 CATV Fiberoptic Links
 WDM Systems
 Fiberoptic Instruments
 Transmitters and Fiber Laser Sensors
 Laboratory R&D
Note:
[1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified.
[2] All the parameters are excluding connectors
[3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified.
S0002 - R11. 20101028
Band Pass Filter/Isolator Hybrid Combination
BFIH Series
Mechanical Drawing and Configuration (dimension in mm)
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
P1 Package Dimension
Configuration
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
BFIH
0
Wavelength
Type A = A
Type B = B
0
0
0
0
1
Package Type
Fiber Length*
P1 = 1
1.0 Meter = 1
1.5 Meters = 5
2.0 Meters = 2
Stage
Single Stage = S
Dual Stage = D
Fiber Jacket
250μm SMF-28 = 1
900μm tight buffer = 5
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC = 9
MU = A
* The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber
length will be longer.
S0002 - R11. 20101028
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules