br 558

Space Products
FPGA Power Solutions, Switching Regulators, LDOs, CAN Transceivers,
Multiplexers, Temperature Sensors, Voltage References
Product Highlights
January – June 2016
ORDER YOUR
EVALUATION BOARD
http://www.intersil.com/en/tools/reference-designs.html
Contents
Contents
Rad-Hard QML SMD......................................................... 8
Rad-Hard FPGA.................................................................. 9
Rad-Hard Power...............................................................10
Rad-Hard Analog..............................................................12
EH Products Selection Table.........................................16
Design Tools and Support.............................................22
4 \ Space Products
Six Decades of Flight Experience
Intersil’s history and experience in the
low dose rate acceptance testing as a
space and defense industries spans
complement to current high dose rate
almost six decades beginning with the
acceptance testing.
founding of Radiation, Inc. in 1950.
Today, Intersil continues to support
All Intersil SMD products are MIL-
and release new SMD-based, Class-
PRF-38535/QML compliant and are
V/Q radiation hardened (rad hard)
100% burned in.
products for Hi-Reliability, and Space
marketplaces.
By leveraging Intersil’s latest
technology for the consumer
The low dose rate ionizing dose
marketplace, Intersil’s Space products
response of semiconductors
group is releasing Class V/Q products
has become a key issue in space
that are revolutionizing the
applications. Intersil is addressing this
Hi-Reliability and Space marketplaces.
changed market by wafer-by-wafer
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Space Products / 5
Why Intersil?
Highest Standards
As a major supplier to the military and aerospace industries,
Intersil’s product development methodologies reflect
experience designing products to meet the highest standards
for reliability and performance in challenging environments.
Intersil products can be found in virtually every satellite
shipped into space.
•All products are MIL-PRF-38535/QML compliant
•All products are 100% burned in
Reliable, Proven Supply Chain
Proven proprietary processes and package technologies,
shipping over 1 billion ICs per year.
•Strong technology development
––Proprietary process and package technologies
•Consistent design and manufacturing in Intersil’s MIL-PRF38535-qualified facility in Palm Bay, Florida
•Intersil is one of only a few RHA Defense Logistics Agency
(Land and Maritime) QML suppliers
•All products are fully Class V (space level) compliant
•All products are on individual DLA SMD drawings
•Multi-sourcing strategy
––Sourcing from multiple leading-edge semiconductor
foundries & assembly/test partners ensures a steady
product supply and reduced risk
•Industry-leading quality & reliability metrics
––Billion+ ICs shipped every year
Assured Product Supply
Long life cycles ensure steady flow of product. Intersil still
supports customer programs with products in production for
over 40 years.
––Less than 1.2 DPPM (defective parts per million) and
improving
––Decades of experience handling military/space products
and delivering world-class quality and reliability metrics
––ISO/TS16949 and AEC-Q100
––MIL-PRF-38535 compliant and 100% burned in
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
6 \ Space Products
When failure is
not an option™
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Space Products / 7
Intersil’s Approach to Radiation
Environments in Space
TID (TOTAL IONIZING DOSE)
TID is the progressive, long-term
ionizing radiation damage caused
by protons, electrons and other
sources. Total ionizing dose testing
of semiconductor components
has historically been performed
at ‘qualification’ dose rates in the
50–300rad(Si)/s. Modern submicron technologies tend to be
more resistant to total dose effects.
Intersil's approach: TID hardness
is tested and guaranteed on a
wafer-by-wafer basis to MILSTD-883 Method 1019 using an
in-house Gammacell 220™ 60Co
irradiator. This testing is done at
both high dose rates (50rad(si)/s)
and low dose rates (0.01rad(Si)/s).
SEE (SINGLE-EVENT EFFECTS)
The intense heavy ion environment
encountered in space applications
can cause a variety of effects in
electronic circuitry, including SingleEvent Transient (SET), Single-Event
Latchup (SEL) and Single-Event
Burnout (SEB). These Single-Event
Effects (SEE) can lead to systemlevel performance issues including
disruption, degradation and
destruction.
Intersil's approach: SEE
characterizations are performed at
Texas A&M. To view our complete
ELDRS and SEE test reports, go to:
www.intersil.com
ELDRS (ENHANCED LOW
DOSE RATE SENSITIVITY)
PROGRAM
Intersil's approach: Starting
in 2011, Intersil now performs
wafer-by-wafer production
testing qualification at both low
and high dose rate under biased
and unbiased conditions. Intersil
constructed a vault-type low
dose rate irradiator specifically to
support this activity. Baseline ELDRS
testing continues, and complete
reports can be found on the Intersil
website. Intersil parts released on
this new low dose flow have an EH
designation (vs. RH).
Intersil is performing waferby-wafer production testing
qualification at both low and high
dose rate under biased and unbiased conditions.
Many industry-standard devices
show severe degradation of key
parameters when irradiated at
very low dose rates. The de facto
standard for low dose rate is 0.01
rad(Si)/s, which is now included in
MIL-STD-883 Method 1019.
View of ‘pop-up’ source (center) and
surrounding test racks.
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Rad-Hard QML SMD
8 \ Space Products
STANDARD DATA PACKAGE
Class Q
Class V
EH Die Authorized Die
Processors Only
X
X
X
RH Die Authorized Die
Processors Only
HS0‑XXXXRH‑Q
IS0‑XXXXRH‑Q
ISL7XXXXRHVX
"HSR" or "HMSR"
in the part #
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Nomenclature, Example
RH Packaged
Part
RH Packaged Part
EH Packaged
Part
Part Types
"RH‑8" "RHQ"
XXXXRH‑8
in the part #
"MSR" "NSR" “RHV"
"RH‑Q" XXXXRH‑Q
in the part #
"EHV" "EH‑Q"
XXXXEH‑Q
in the part #
Shipper/Pack Slip
P.O. Number
Customer Part Number, Rev (as applicable on the P.O.)
X
X
X
X
X
X
Intersil Part Number
X
Lot Date Code / Trace Code
Lot Number
Quantity
Certificate of Conformance
Screening Attributes Data
Post seal thru end of 100% screening operations
Test Operations
Test Methods
Quantity of units in/out by operation
Date of each test
PDA as applicable
Visual Inspection
Document Review
Screening Variables & Delta Data - Variables data for all read/
record and/or delta operations pre/post burn-in @25C are
provided on electronic media.
Group A Attributes (located in Screening Attribute Data if
performed)
Group B Attributes Summary
Group C Attributes Summary
Group C Variables & Delta Data - Variables data for all read/
record and/or delta operations pre/post life test are provided
on electronic media.
Group D Attributes Summary
Group E Variables Data for HDR & LDR - Variables data for
all read/record operations pre/post rad are provided on
electronic media.
SEM C of C & Photos (if performed)
Radiation C of C (High Dose Rate and/or Low Dose Rate)
X-Ray Report (Film kept on file and available on request.
Request must be documented on P.O.)
X
X
X
X
HS0‑XXXXEH‑Q
IS0‑XXXXEH‑Q
ISL7XXXXEHVX
in the part #
X
X
X
X
X
X
X
HDR
X
HDR
X
HDR & LDR
X
X
All EH product shipments will now come with Group C and E variables data in the data package.
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
X
X
HDR
X
HDR & LDR
Space Products / 9
Rad-Hard FPGA
Complete Solutions for Powering Rad-Hard FPGAs
The ISL70001/02/03SEH are total dose and SEE hardened
high efficiency, monolithic synchronous buck regulators
with integrated MOSFETs. These single chip power solutions
operate over an input voltage range of 3V to 5.5V or 3.0V to
13.2V and provide a tightly regulated output voltage that is
externally adjustable from 0.8V to ~85% of the input voltage.
FPGA Design Tools & Solutions
www.intersil.com/content/intersil/en/applications/fpgapower-solutions.html
The ISL70003SEH can provide up to 6A (TJ ≤ +145°C) of
output current while the ISL70002SEH can provide up to
12A (TJ ≤ +150°C) of output current per device.
FPGA REFERENCE DESIGN GENERATOR
The FPGA Reference Design
The ISL75051SEH is a radiation hardened, low voltage,
Generator app helps you find the
high current, single output LDO specified for up to 3.0A of
Intersil power management part
continuous output current. It can operate over an input
that best fits the needs of your
voltage range of 2.2V to 6.0V and is capable of providing
design. Simply select the FGPA
output voltages of 0.8V to 5V with an external resistor
vendor and platform, and input your
divider. Dropout voltages as low as 65mV can be realized
current requirements. Select your
with this device.
backplane(s) and the type of solution(s) you need, and get
detailed support files:
For more information see AN1707: Intersil’s Radiation
Hardened FPGA Power Solutions.
VIN
• Schematic (PDF and OrCad source files)
LXx
EN
1.5V Core
Voltage
ISL70003SEH
M/S
PGOOD
5V
VIN
VOUT
EN
3.3V Auxiliary
Voltage
ISL75051SEH
VIN
LXx
BYP
PGOOD
EN
ISL70003SEH
1.5V - 3.3V I/O
Voltage
Rad Tolerant FPGA
12V±10%
• Block Diagram
• BOM (Excel file)
• Read Me (with instructions for modifying the solution if
needed)
M/S
PGOOD
VIN
VOUT
EN
ISL75051SEH
BYP
PGOOD
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Rad-Hard Power
10 \ Space Products
Switching Regulators
ISL70003ASEH
Industry's First Radiation
Hardened 12V Input Point of
Load Switching Regulator
Intersil’s ISL70003ASEH switching regulator is the industry’s
first radiation hardened 12V sync buck regulator capable
of operating over an input voltage range of 3.0V to 13.2V.
Ideal for aerospace and satellite power applications,
ISIM
the ISL70003ASEH offers robust reliability and accuracy
EVALUATION
BOARD
to support the most demanding POL voltage tolerance
•±1% reference voltage over line, temperature
and radiation
0.47µF
0.47µF
357
25k
2.7nF
0.22µF
PORVIN 4
PVIN1 23
PVIN2 28
PVIN3 32
PVIN4 37
38
PVIN5 43
PVIN6 44
PVIN7 49
PVIN8 53
PVIN9 58
PVIN10 6
AVDD 10
DVDD
ISL70003SEH
0.1µF
LX1
LX2
LX3
LX4
LX5
LX6
LX7
LX8
LX9
LX10
24
27
33
36
39
42
45
48
54
57
• Externally adjustable loop compensation
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
PGOOD
3.3µH
2 FB
3 VERR
1 NI
64 REF
OCB 60
VOUT = 3.3V
+ 150µF
10k
1nF
4.02k
6.8nF
4.02k
6.8nF
• Integrated MOSFETs 31mΩ PFET/21mΩ NFET
–– 95% peak efficiency
3k
10nF
OCA 59
1nF
5.49k 12pF 51.1k
10nF
PGOOD 22
5 VREFA
9 VREFOUTS
11 VREFD
15
SYNC
16
SS
7.15k
SGND
AGND
DGND
PGND1
PGND2
PGND3
PGND4
PGND5
PGND6
PGND7
PGND8
PGND9
PGND10
•Acceptance tested to 50krad(Si) (LDR)
wafer-by-wafer
0.47µF
51 IMON
FSEL
SEL1
SEL2
DE
NC
•Operates over an input voltage of 3.0 to 13.2V
10k
51k
EN 12
•Output current rating of 9A
VIMON
100k
22k
52
7
8
25
26
34
35
40
41
46
47
55
56
370pF
BUFIN+ 61
BUFIN- 62
BUFOUT 63
5 x 1µF
14
29
30
31
50
4x100µF
RT/CT 13
+
TDI
TPGM
TDO
TSTRIM
TCLK
radiation found in harsh environments.
VIN = 12V
17
18
19
20
21
requirements and to withstand low- and high-dose ionizing
ISL70003SEH Single Unit Operation
1µF
Space Products / 11
LDOs
ISL75052SEH
•Radiation environment
––High dose rate (50-300rad(Si)/s): 100krad(Si)
––Low dose rate (0.01rad(Si)/s): 100krad(Si)*
1.5A, Rad-Hard, Positive,
High Voltage LDO
––SET/SEL/SEB86MeV.cm2/mg
•Input supply range 4V to 13.2V
•Best in class accuracy ±1.5%
•Ultra low dropout:
The ISL75052SEH is a radiation hardened, single output LDO
––75mV dropout (typ) @ 0.5A
specified for an output current of 1.5A. The device operates from
an input voltage range of 4.0V to 13.2V and provides for output
––225mV dropout (typ) @ 1.5A
•Noise of 100µVRMS (typ) between 300Hz to 300kHz
voltages of 0.6V to 12.7V. The output is adjustable based on a
•SET mitigation with no added filtering/diodes
resistor divider setting. Dropout voltages as low as 75mV (at 0.5A)
•Shutdown current of 165µA (typ)
typical can be realized using the device. This allows the user to
•SPICE model available
improve the system efficiency by lowering VIN to nearly VOUT.
*Level guaranteed by characterization; “EH” version is production tested
to 50 krad(Si).
Rad-Hard Power Management Product Highlights
HDR
ELDRS
SEL
Device
Category
Class
DLA SMD
(KRAD) (KRAD) (MEV/MG/CM2)
Package
ISL70002SEH
3V to 5.5V, 12A Buck Regulator
V, /PROTO
5962-12202
100
50
86.4
64 Ld CQFP
ISL70003ASEH
3V to 13.2V, 9A Buck Regulator
V, /PROTO
5962-14203
100
50
86.4
64 Ld CQFP
ISL75052SEH
1.5A, High Voltage LDO
V, Q, /PROTO
5962-13220
100
50
86
16 Ld CFP
ISL7884XSEH
Switching Controller
V, /PROTO
5962-07249
100
50
86
8 Ld CFP
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Rad-Hard Analog
12 \ Space Products
CAN Transceivers
ISL72026/27/28SEH
Industry’s First Rad Tolerant 3.3V
CAN Transceivers for Satellite
Communications
Intersil’s ISL7202xSEH CAN transceivers provide reliable serial data
transmission between a CAN controller and CAN bus at speeds
up to 1Mbps. Up to 120 ISL7202xSEH ICs can be connected to
EVALUATION
BOARD
DESIGN
MODEL
a single CAN bus to reduce cabling/harness size, weight and
power (SWAP) costs, allowing system engineers to increase
satellite functionality and eliminate the extra cabling and tradeoffs
associated with current point-to-point interface solutions.
CAN
Networks
Significantly REDUCE
Reduce Wiring
CAN
NETWORK
SIGNIFICANTLY
WIRING
Without CAN
I/O
With CAN
––Loopback feature which provides a
node diagnostic mode
•ISL72027SEH
––Split mode feature which helps improve
EMI/EMC
•ISL72028SEH
––Low power shutdown mode
I/O
ECU
•ISL72026SEH
ECU
Device
Device
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Space Products / 13
Multiplexers
ISL71830/31SEH
Rad Tolerant 5V Multiplexers that
Deliver Best-in-Class Performance
for Space Flight Systems
Intersil’s ISL71830/31SEH 5V rad hard multiplexers provide data
acquisition systems with the industry’s best ESD protection,
and deliver lower RON and input leakage for reduced power
consumption and higher signal integrity.
EVALUATION
BOARD
DESIGN
MODEL
The 16-channel ISL71830SEH and 32-channel ISL71831SEH
multiplexers provide a “cold spare” redundant capability, allowing
the connection of 2-3 additional unpowered multiplexers to a
common data bus.
Rad-Hard Multiplexers Product Highlights
Device
Channels
Supply Voltage
RON (typ)
Off Switch Leakage (max)
Package
ISL71840SEH
16
30V
<500Ω
100nA
28 LD CDFP
ISL71841SEH
32
30V
<500Ω
100nA
48 Ld CQFP
ISL71830SEH
16
5V
<120Ω
120nA
28 LD CDFP
ISL71831SEH
32
5V
<120Ω
120nA
48 Ld CQFP
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Rad-Hard Analog
14 \ Space Products
Temperature Sensors
ISL71590SEH
Rad-Hard 2-Pin Temperature
Transducer (Sensor)
The ISL71590SEH temperature compensated current source
comes in a 2 terminal package and has a high impedance
current output that allows it to be insensitive to voltage drops
across long lines. It has a high impedance current output that
allows it to be insensitive to voltage drops across long lines. When
provided a voltage between 4V and 33V on the input pin, the
device acts as a constant current regulator that generates 1μA/K.
•Total dose, high dose rate: 300krad(Si)
EVALUATION
BOARD
ACCURATE TEMP MEASUREMENT
Within 1°C of temperature accuracy over
Low Dose Rate up to 50krad (Si) and 1°C
temperature accuracy over High Dose Rate
up to 300krad (Si) of total dose.
•Total dose, low dose rate: 50krad(Si)
ISL71590 High Dose Rate
ISL71590 Low Dose Rate
•Linear output current: 1μA/K
•Wide power supply input range: 4V to 33V
•Low power consumption 1.5mW at 5V
Error in Temperature (°C)
•SEL and SEB LETTH: 86.4MeV.cm2/mg
0
-1
-2
Competitor A (High Dose Rate)
-3
-4
-5
-6
-7
-8
-9
-10
Competitor A
(Low Dose Rate)
0
20
40
60
80
Total Dose in krad (Si)
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
100
300
Space Products / 15
Voltage References
ISL71091EH
Ultra Low Noise, High Precision
Voltage References
The ISL71091SEH10, 20, 33 and 40 provide voltages previously
unavailable for the rad hard space market. This family enables
better overall accuracy for 11-bit and 12-bit ADC resolution
applications. The ISL71091SEH family offers the industry’s best
output voltage noise and a reference voltage that is stable over
time, temperature and ionizing radiation, providing increased
precision in satellite data acquisition, signal processing and
power management applications.
•Reference output voltage
(±0.05%): 2.048V, 3.3V,
4.096V, 10.0V
•Accuracy over
temperature: ±0.15%
•Accuracy over radiation
±0.25%
•Output voltage noise (0.1Hz to 10Hz, µVP-P typ):
3.8, 5.2, 6.2, 14.8
•Supply current: 300µA (Typ)
•VOS temperature coefficient: 6ppm/°C, max.
•Output current capability: 10mA/-5mA
Rad-Hard Analog Product Highlights
Device
Category
Class
DLA SMD
HDR
(KRAD)
ELDRS
(KRAD)
SEL
(MEV/MG/CM2)
ISL70444SEH
Op Amp
V, /PROTO
5962-13214
100
50
86.4
14 Ld CFP
ISL70227SEH
Op Amp
V, /PROTO
5962-12223
100
50
86.4
10 Ld CFP
ISL71590SEH
Temp Sensor
V, /PROTO
5962-13215
300
50
86.4
2 Ld CFP
ISL71091SEH
Voltage
Reference
V, /PROTO
5962-14208
100
50
86
8 Ld CFP
Package
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
EH Products Selection Table
16 \ Space Products
Rad-Hard Analog EH Products
Device
Description
Class
DLA SMD
High
Dose
Rate
Low
Dose
Rate
Qualification
Level
Single
Event
Latchup
COMPARATORS
HS-139EH
Quad Voltage Comparator
V, /PROTO
5962-98613
300
50
QML Class V
SEL free
IS-139ASEH
Single Event Quad Voltage
Comparators
V, Q, /PROTO
5962-01510
300
Report
Available
QML Class V
SEL free
ISL7119EH
High Speed Dual Voltage Comparator
V, /PROTO
5962-07215
300
50
QML Class V
SEL free
SWITCH/MUX
HS-1840AEH
16 Channel CMOS Analog Multiplexer
with High-Z Analog Input Protection
V, /PROTO
5962-95630
300
50
QML Class V
SEL free
HS-1840BEH
16 Channel BiCMOS Analog Multiplexer
with High-Z Analog Input Protection
V, /PROTO
5962-95630
300
50
QML Class V
SEL free
HS-201HSEH
High Speed, Quad SPST, CMOS Analog
Switch
V, /PROTO
5962-99618
300
50
QML Class V
SEL free
HS-303AEH
CMOS Dual SPDT Analog Switch
V, Q, /PROTO
5962-95813
300
50
QML Class V
SEL free
HS-303BEH
CMOS Dual SPDT Analog Switch
V, Q, /PROTO
5962-95813
300
50
QML Class V
SEL free
HS-303CEH
BiCMOS Dual SPDT Analog Switch
V, Q, /PROTO
5962-95813
100
50
QML Class V
SEL free
HS-508BEH
8 Channel CMOS Analog Multiplexer
with Overvoltage Protection
V, /PROTO
5962-96742
300
50
QML Class V
SEL free
ISL71830SEH
5V 16-Channel Analog Multiplexer
V, /PROTO
5962-15247
75
QML Class V
60
ISL71831SEH
5V 32-Channel Analog Multiplexer
V, /PROTO
5962-15248
75
QML Class V
60
ISL71840SEH
30V 16-Channel Analog Multiplexer
V, /PROTO
5962-15219
100
50
QML Class V
86.4
ISL71841SEH
30V 32-Channel Analog Multiplexer
V, /PROTO
5962-15220
100
50
QML Class V
86.4
V, /PROTO
5962-95669
100
50
QML Class V
SEL free
SAMPLE AND HOLD
HS-2420EH
Fast Sample and Hold
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Space Products / 17
Rad-Hard Analog EH Products (continued)
Device
Description
Class
DLA SMD
High
Dose
Rate
Low
Dose
Rate
Qualification
Level
Single
Event
Latchup
INTERFACE
HS-26C31EH
Quad Differential Line Driver
V, /PROTO
5962-96663
300
50
QML Class V
100
HS-26C32EH
Quad Differential Line Receiver
V, /PROTO
5962-95689
300
50
QML Class V
100
HS-26CLV31EH
3.3V Quad Differential Line Drivers
V, /PROTO
5962-96663
300
50
QML Class V
100
HS-26CLV32EH
3.3V Quad Differential Line Receiver
V, /PROTO
5962-95689
300
50
QML Class V
100
HS-26CT31EH
Quad Differential Line Drivers
V, /PROTO
5962-95632
300
50
QML Class V
100
HS-26CT32EH
Quad Differential Line Receivers
V, Q, /PROTO
5962-95631
300
50
QML Class V
100
ISL72026SEH
3.3V CAN Transceiver, 1Mbps, Listen
Mode, Loopback
Q, /PROTO
5962-15228
75
75
QML Class V
60
ISL72027SEH
3.3V CAN Transceiver, 1Mbps, Listen
Mode, Split Termination Output
Q, /PROTO
5962-15228
75
75
QML Class Q
(military)
60
ISL72028SEH
3.3V CAN Transceiver, 1Mbps, Low
Power Shutdown, Split Termination
Output
Q, /PROTO
5962-15228
75
75
QML Class Q
(military)
60
HS-3530AEH
Programmable Low Power Op Amps
V, /PROTO
5962-95687
300
50
QML Class V
SEL free
HS-5104AEH
Low Noise Quad Operational
Amplifiers
V, /PROTO
5962-95690
100
50
QML Class V
SEL free
HS-OP470AEH
Very Low Noise Quad Operational
Amplifier
V
5962-98533
100
50
QML Class V
SEL free
ISL70218SEH
Enhanced Dual 36V Precision SingleSupply, Rail-to-Rail Output, Low-Power
Op Amp
V, /PROTO
5962-12222
100
50
QML Class V
SEL free
ISL70219ASEH
40V and SET Enhanced Precision Low
Power Operational Amplifier
V, /PROTO
5962-14226
300
50
QML Class V
SEL free
ISL70227SEH
36V Dual Precision Operational
Amplifier
V, /PROTO
5962-12223
100
50
QML Class V
SEL free
OP AMPs
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
EH Products Selection Table
18 \ Space Products
Rad-Hard Analog EH Products (continued)
Class
DLA SMD
High
Dose
Rate
19MHz 40V Dual Rail-to-Rail InputOutput, Low-Power Operational
Amplifier
V, /PROTO
5962-13248
300
50
QML Class V
86.4
ISL70417SEH
40V Quad Precision Low Power
Operational Amplifiers
V, /PROTO
5962-12228
300
50
QML Class V
SEL free
ISL70419SEH
36V Quad Precision Low Power
Operational Amplifier With Enhanced
SET Performance
V, /PROTO
5962-14226
300
50
QML Class V
SEL Free
ISL70444SEH
19MHz 40V Quad Rail-to-rail Inputoutput, Low-power Operational
Amplifiers
V, /PROTO
5962-13214
100
50
QML Class V
86.4
ISL7124SEH
Single Supply Quad Operational
Amplifier
V, /PROTO
5962-02542
300
50
QML Class V
SEL free
High Speed, Monolithic Digital-ToAnalog Converter
V, /PROTO
5962-96755
100
50
QML Class V
SEL free
V, Q, /PROTO
5962-00523
300
50
QML Class V
SEL free
Device
Description
ISL70244SEH
Low
Dose
Rate
Qualification
Level
Single
Event
Latchup
CONVERTER
HS-565BEH
VOLTAGE REFERENCE
IS-1009EH
2.5V Reference
ISL71090SEH12
Ultra Low Noise, Precision Voltage
Reference
V, /PROTO
5962-13211
100
50
QML Class V
86
ISL71090SEH25
Ultra Low Noise, Precision Voltage
Reference
V, /PROTO
5962-13211
100
50
QML Class V
86
ISL71090SEH50
Ultra Low Noise, Precision Voltage
Reference
V, /PROTO
5962-13211
100
50
QML Class V
86
ISL71090SEH75
Ultra Low Noise, Precision Voltage
Reference
V, /PROTO
5962-13211
100
50
QML Class V
86
ISL71091SEH10
10V Ultra Low Noise, Precision Voltage
Reference
V, /PROTO
5962-14208
100
50
QML Class V
86
ISL71091SEH20
2.048V Ultra Low Noise, Precision
Voltage Reference
V, /PROTO
5962-14208
100
50
QML Class V
86
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Space Products / 19
Rad-Hard Analog EH Products (continued)
Class
DLA SMD
High
Dose
Rate
3.3V Ultra Low Noise, Precision Voltage
Reference
V, /PROTO
5962-14208
100
50
QML Class V
86
4.096V Ultra Low Noise, Precision
Voltage Reference
V, /PROTO
5962-14208
100
50
QML Class V
86
V, /PROTO
5962-13215
300
50
QML Class V
86.4
Device
Description
ISL71091SEH33
ISL71091SEH40
Low
Dose
Rate
Qualification
Level
Single
Event
Latchup
TEMP SENSOR
ISL71590SEH
Radiation Hardened, 2-Terminal
Temperature Transducer
TRANSISTOR ARRAY
ISL73096EH
Ultra High Frequency NPN/PNP
Transistor Arrays
V, Q
5962-07218
300
50
QML Class V
SEL free
ISL73127EH
Ultra High Frequency NPN/PNP
Transistor Arrays
V, Q
5962-07218
300
50
QML Class V
SEL free
ISL73128EH
Ultra High Frequency NPN/PNP
Transistor Arrays
V, Q
5962-07218
300
50
QML Class V
SEL free
V, /PROTO
5962-99547
300
50
QML Class V
SEL free
Rad-Hard Power EH Products
LINEAR REGULATION
HS-117EH
Adjustable Positive Voltage Regulator
MOSFET DRIVERS
HS-4080AEH
Full Bridge N-Channel FET Driver
V
5962-99617
300
50
QML Class V
SEL free
HS-4423BEH
Dual, Inverting Power MOSFET Drivers
V
5962-99511
300
50
QML Class V
SEL free
HS-4423EH
Dual, Inverting Power MOSFET Driver
V
5962-99511
300
50
QML Class V
SEL free
HS-4424BEH
Dual, Non-Inverting Power MOSFET
Drivers
V
5962-99560
300
50
QML Class V
SEL free
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
EH Products Selection Table
20 \ Space Products
Rad-Hard Power EH Products (continued)
Class
DLA SMD
High
Dose
Rate
Dual, Noninverting Power MOSFET
Drivers
V
5962-99560
300
50
QML Class V
SEL free
HS-4424EH
Dual, Non-Inverting Power MOSFET
Drivers
V
5962-99560
300
50
QML Class V
SEL free
IS-2100AEH
High Frequency Half Bridge Drivers
V, /PROTO
5962-99536
300
50
QML Class V
SEL free
IS-2981EH
8-Channel Source Driver
V, /PROTO
5962-00520
100
50
QML Class V
SEL free
Device
Description
HS-4424DEH
Low
Dose
Rate
Qualification
Level
Single
Event
Latchup
SWITCHING REGULATORS
ISL70001ASEH
SEE Hardened 6A Synchronous Buck
Regulator
V, /PROTO
5962-09225
100
50
QML Class V
86.4
ISL70001SEH
SEE Hardened 6A Synchronous Buck
Regulator
V, /PROTO
5962-09225
100
50
QML Class V
86.4
ISL70002SEH
SEE Hardened 12A Synchronous Buck
Regulator with Current Sharing
V, /PROTO
5962-12202
100
50
QML Class V
86.4
ISL70003ASEH
SEE Tolerant 3V to 13.2V, 9A Buck
Regulator
V, /PROTO
5962-14203
100
50
QML Class V
86.4
ISL70003SEH
SEE Hardened 3V to 13.2V, 6A Buck
Regulator
V, /PROTO
5962-14203
100
50
QML Class V
86.4
SUPERVISORY
ISL705AEH
5.0V µ-Processor Supervisory Circuits
V, /PROTO
11213
100
50
QML Class V
86
ISL705BEH
5.0V µ-Processor Supervisory Circuits
V, /PROTO
11213
100
50
QML Class V
86
ISL705CEH
5.0V µ-Processor Supervisory Circuits
V, /PROTO
11213
100
50
QML Class V
86
ISL706AEH
3.3V µ-Processor Supervisory Circuits
V, /PROTO
11213
100
50
QML Class V
86
ISL706BEH
3.3V µ-Processor Supervisory Circuits
V, /PROTO
11213
100
50
QML Class V
86
ISL706CEH
3.3V µ-Processor Supervisory Circuits
V, /PROTO
11213
100
50
QML Class V
86
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Space Products / 21
Rad-Hard Power EH Products (continued)
Device
Description
Class
DLA SMD
High
Dose
Rate
Low
Dose
Rate
Qualification
Level
Single
Event
Latchup
LDO
ISL75051SEH
3A, Positive, Ultra Low Dropout
Regulator
V, /PROTO
5962-11212
100
50
QML Class V
86
ISL75052SEH
1.5A, Positive, High Voltage LDO
V, Q, /PROTO
5962-13220
100
50
QML Class V
86
V
5962-99558
300
50
QML Class V
SEL free
SWITCHING CONTROLLERS
HS-1825AEH
High-Speed, Dual Output PWM
ISL78840ASEH
High Performance Industry Standard
Single-Ended Current Mode PWM
Controller
V, /PROTO
5962-07249
100
50
QML Class V
86
ISL78841ASEH
High Performance Industry Standard
Single-Ended Current Mode PWM
Controller
V, /PROTO
5962-07249
100
50
QML Class V
86
ISL78843ASEH
High Performance Industry Standard
Single-Ended Current Mode PWM
Controller
V, /PROTO
5962-07249
100
50
QML Class V
86
ISL78845ASEH
High Performance Industry Standard
Single-Ended Current Mode PWM
Controller
V, /PROTO
5962-07249
100
50
QML Class V
86
For complete product list,
visit Space & Harsh Environment page on www.intersil.com
Design Tools and Support
Design Tools and Support
REFERENCE AND EVALUATION PLATFORMS
Browse our library of reference designs,
evaluation boards, and demo boards.
ISIM DESIGN TOOL
DESIGN MODELS
Download IBIS, SPICE, macro, Saber
and text file design models.
VIDEO CENTER
Intersil’s iSim interactive web-based design
Watch the latest videos and
tool helps you select and simulate power
tutorials at Intersil’s Video Center.
and precision analog devices.
SUPPORT PORTAL
APPLICATION BLOCK DIAGRAMS
Get answers from an Intersil application
Browse the latest application block
support professional within one
diagrams and selection tables.
business day.
PRODUCT CHANGE NOTIFICATION
Subscribe to receive product change
notifications for the devices you are using in
your design.
QUICK FACTS
Founded1999
Headquarters
San Jose, CA
President, CEO
Necip Sayiner
Employees1,100
NASDAQ Listing ISIL
Market Cap
$2 billion
FY 2015 Sales
$522 million
U.S. Patents
1,000+
MAIN OFFICES
North America - West Coast
1001 Murphy Ranch Road
Milpitas, CA 95035
TEL:1-888-INTERSIL (468-3774)
North America - East Coast
1650 Robert J. Conlan Blvd
NE Palm Bay, FL 32905
TEL: 321-724-7000
FAX: 321-729-7320
Europe
Oskar-Messter-Str. 29
D-85737 Ismaning, Germany
TEL: +49-89-46263-0
China
Suite 701, Han Tang Building
Overseas Chinese Town
Shenzhen 518053, P.R. China
TEL: +86-755-8246-5118
Japan
6F, Mita Nitto Daibiru
3-11-36, Mita, Minato-ku
Tokyo, 108-0073, Japan
TEL: +81-3-5439-2311
www.intersil.com
BR-558.16 © 2016 Intersil Americas LLC. All Rights Reserved. Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries. All other trademarks
mentioned are the property of their respective owners.