Nano Module Multi125 LV 125kHz Contactless Reader/Writer Elatec’s Nano Module Multi125 LV is designed for integration into machines, handheld computer or any other device. The focus is set especially on size, price and flexibility. Thanks to its compact dimensions an integration directly on a PC board is possible. Following special features: Support for many different transponder types. Five configurable I/Os. Transponder operation can be triggered externally. Optionally, a version with support for HITAGTM crypto mode is available. Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com Technical Data Housing Frequency Dimensions (L x W x H) Power Supply Current Consumption Temperature Range Relative Humidity Antenna Read- / Write Distance Supported Transponders Certification Weight Order Code without 125kHz+/- 0.5% 20,32mm x 20,32mm x 6,0mm / 0.80inch x 0.80inch x 0.24inch - Height is measured from surface of carrying PCB. Length of pins for soldering into carrying PCB is additional 3.3mm / 0.13inch 3.15 – 5.5 V DC RF field off: 15mA RF field on: typically 50mA, depending on antenna Operating: -25°C up to +80°C (-13°F up to +176°F) Storage: -40°C up to +85°C (-40°F up to +185°F) 5% to 95% non-condensing To be connected externally (490 µH) Proximity, depending on antenna and tag EM4026, EM4102,EM4105, EM4126, EM4150, EM4200, EM4205 , EM4305 EM4350, EM4450 FDX-B HITAG 1 , HITAG 2 HITAG S MIRO Q5 (on request) T5557,T5567, T5577 (on request) TITAN, UNIQUE, ZOODIAC RoHS compliant Approx. 2g ART10413 Pinning Schematically picture (component side) Pin spacing 2,54mm Pin 1 2 3 Name GND VCC RxD- 4 TXD- 5…7 8 9 10 11 IO1, IO2, IO3 RESANT1 ANT2 ANTC 12…13 IO4 IO5 14…16 N/C Description Ground Supply Voltage Data input, TTL-Level (low active) Data output, TTL-Level (low active) Free programmable I/O, e.g. for LEDs or loudspeakers RESET (low active) Antenna connector Antenna connector Tuning capacitor for antenna; (second pin is ANT1) Free programmable I/O, e.g. for LEDs or loudspeakers for internal use Elatec reserves the right to change any information or data in this document without prior notice. The distribution and the update of this document is not controlled. Elatec declines all responsibility for the use of product with any other specifications but the ones mentioned above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where application information is given, it is only advisory and does not form part of the specification © 2011 Elatec GmbH – V2.0 – 01/2011 Elatec GmbH Lilienthalstr. 3 82178 Puchheim Germany Phone: Fax: +49 89 5529961 0 +49 89 5529961 29 [email protected] www.elatec-rfid.com