Download

Cut the Cable
TM
ISM Transceiver PAN2355
OUTLINES - ENW59611N3A
(Module without shielding)
W
Electronic Devices (Europe) GmbH
IRELESS
M
ODULES
Panasonic
This extremely compact and high-functionality module is
mainly intended for the ISM (Industrial, Scientific and Medical)
frequency bands at 868 and 915 MHz. Other frequency bands
are possible on request. It provide a wireless radio transceiver
and can be linked to a wide range of devices including home
appliances, keyless entry and many other applications through
SPI or UART.
Programming of the vast functionalities of the transceiver are
done via SPI. The PAN2355 is made for all applications where
a wide band bidirectional data transfer with high speed is
needed.
It is focussed on small size with a 8.0x8.2mm footprint and
very low power consumption for battery driven applications.
FEATURES
-
Programmable datarate up to 500 kBaud (NRZ mode)
Very low current consumption
Frequency range 300 - 1000 MHz
High sensitivity (typ. -100 dBm at 2.4 kBaud, Manchester)
Programmable output power -30 dBm to +10 dBm
Low supply voltage (2.1 V to 3.6 V)
Operating temperature range -40°C to +85°C
Small size (8.0mm x 8.2mm x 1.9mm) incl. shielding
Digital RSSI output
Single port 50 Ω antenna connection
Programmable frequency in 400 Hz steps makes
crystal temperature drift compensation possible
APPLICATIONS
-
RKE - Two-way Remote Keyless Entry
Home Automation Systems
AMR - Automatic Meter Reading
Low Power Telemetry
Toys
Remote Control Systems
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation.
2355-100-101 Rev. C
www.pedeu.panasonic.de
[email protected]
Hardware Status:
Mass Production
CONTACT
Carsten Pfaff
Head of Product Marketing
HY-LINE Communication Products Vertriebs GmbH
Inselkammerstr. 10
82008 Unterhaching, Germany
Tel:
(49)-89 614503-236
Fax:
(49)-89 6140960
Mobile: (49)-151 6774046
[email protected]
DIMENSIONS
PP “PP
Pin no.
PP“PP
7RS9LHZ
+HLJKW
PP“PP
4,6,10,12
Pin name
GND
1
SPI SI
2
SPI SCLK
3
SPI SO
5
GDO 0
7
SPI CSN
8
Vcc
9
GDO 2
11
50 Ω RF
TECHNICAL CHARACTERISTICS
Parameter
Value
Condition / Note
Receiver Sensitivity,
at 2.4 kbps, 2-FSK
at 250 kbps, 2-FSK
-100 dBm
-85 dBm
more details in datasheet
Output Power
-30 to 10 dBm
Delivered to 50 Ω load. The
output power is programmable.
RSSI dynamic range
-136 to -8 dBm
PLL lock time (Rx /Tx turn time)
10 µs
for 1x IF frequency step
PLL turn-on time, crystal oscillator
on in power down mode
80 µs
Crystal oscillator running
Power Down Mode
900 nA typ.
Standby with WOR enabled
Current Consumption
receive mode @2.4 kbps
14.2 mA typ.
Current is programmable and
can be increased for improved sensitivity
Current Consumption
transmit mode
P=3mW (5dBm)
19.7 mA typ.
Delivered to 50 Ω load.
Note:
All parameters are vaild for VCC = 3.0V, Tamb = 25°C and 868MHz
Maximum output power is 10dBm, please check data sheet hints to pass EN300220 requirements.
All other frequencies, e.g. 315MHz, 433MHz and 915MHz are also available on request.
www.pedeu.panasonic.de
[email protected]
Hardware Status:
Mass Production