GS2A THRU GS2M SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Ampere DO-214AA (SMB) FEATURES Plastic package has underwrites laboratory flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief, ideal for automated placement Glass Passivated chip junction High temperature soldering guaranteed 250℃/10 second at terminals MECHANICAL DATA Case: JEDED DO-214AA molded plastic over glass passivated chip Terminals: Solder plated, Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Dimensions in inches and (millimeters) Ratings at 25℃ ambient temperature unless otherwise specified SYMBOL GS2A GS2B GS2D GS2G GS2J GS2K GS2M UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TL =100℃ IF(AV) 2.0 Amps Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) TL =100℃ IFSM 50 Amps RθJA 53 RθJL 16 Operating and Storage Temperature Range TJ,TSTG -55 to +150 ℃ Maximum Instantaneous Forward Voltage at 1.5A VF 1.15 Volts PARAMETER Typical Thermal Resistance (NOTE 1) Maximum DC Reverse Current at rated DC Blocking Voltage TA = 25℃ TA = 125℃ Typical Reverse Recovery Time at IF=0.5A, IR=1.0A, IRR=0.25A, Typical junction capacitance at 4.0V, 1MHz ℃/W 5.0 IR μA 125 Trr 2.0 μs CJ 30 pF 1. Thermal resistance from Junction to ambient and from junction to lead mounted on P.C.B.with 0.3×0.3″(8.0 × 8.0mm) copper pad areas. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 GS2A THRU GS2M RATINGS AND CHARACTERISTIC CURVES Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2