Panduct PanelMax Shielded Wiring Duct For Use with Type C Cover and Compatible with Panduct PanelMax Noise Shield and Panduct Divider Walls Part Numbers: G2X2LG6EMI, G2X3LG6EMI, G2X4LG6EMI INSTALLATION INSTRUCTIONS © Panduit Corp. 2011 EP001 Cutting Shielded Wiring Duct to Required Length 1. 2. 2" max G2X2LG6EMI G2X3LG6EMI G2X4LG6EMI CWST CWST Wire Snipping Tool (sold separately) Remove from both sides DCT Duct Cutting Tool (sold separately) DCT Surface Preparation for Good Electrical Bond 3. Anti-Oxidizing Compound 1" Control panel surface Screw 2" Remove paint to bare metal Repeat for each screw location at duct ends and/or T-intersection Anti-Oxidizing Compound Installing One Shielded Wiring Duct 4A. Screw or NR-1 Rivet - OR - 2" max (sold separately) 10-32 x 1/2" Screws (or sheet metal screw equivalent) to be supplied by the installer or end user 2" max Prepared surfaces (see step 3) Control panel surface Screws NR1-C, NR1-M Rivet (sold separately) For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 INSTALLATION INSTRUCTIONS © Panduit Corp. 2011 EP001 Installing Two Shielded Wiring Duct in a T-intersection Screw or NR-1 Rivet (sold separately) - OR - 10-32 x 1/2" Screws (or sheet metal screw equivalent) to be supplied by the installer or end user Duct #2 4B. Sidewall breakout 2" max 2" max (Remove section 2-3 finger wide as needed) Control panel surface Align screws Duct #1 Prepared surfaces (see step 3) Screws NR1-C, NR1-M Rivet (sold separately) Optional - Sidewall Breakout for Creating T-intersection 2. 1. DNT-100 3. CWST Wire Snipping Tool (sold separately) CWST DNT-100 Duct Notching Tool (sold separately) Optional - Sidewall Finger Removal 2. 1. Remove Only As Required CAUTION Foil edges may be sharp. Removing bridge connectors between fingers will reduce local noice reduction capability. For Use of Panduct PanelMax Noise Shield (SD2EMI, SD3EMI, SD4EMI) with Panduct PanelMax Shielded Wiring Duct, Reference Installation Instructions RW260 E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 Fax: (815) 328-2001