DJC Package 22-Lead Plastic DFN (6mm × 3mm) (Reference LTC DWG # 05-08-1714) 0.889 0.70 ±0.05 R = 0.10 0.889 3.60 ±0.05 1.65 ±0.05 2.20 ±0.05 (2 SIDES) PACKAGE OUTLINE 0.25 ± 0.05 0.50 BSC 5.35 ± 0.05 (2 SIDES) RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS NOTE: 1. DIMENSIONS ARE IN MILLIMETERS 2. APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED 3. DRAWING IS NOT TO SCALE 6.00 ±0.10 (2 SIDES) 0.889 R = 0.10 TYP 3.00 ±0.10 (2 SIDES) R = 0.115 TYP 0.40 ± 0.05 12 22 0.889 1.65 ± 0.10 (2 SIDES) PIN 1 TOP MARK (NOTE 6) 11 0.200 REF 1 0.25 ± 0.05 0.50 BSC 0.75 ±0.05 0.00 – 0.05 5.35 ± 0.10 (2 SIDES) BOTTOM VIEW—EXPOSED PAD NOTE: 1. DRAWING PROPOSED TO BE MADE VARIATION OF VERSION (WXXX) IN JEDEC PACKAGE OUTLINE M0-229 2. DRAWING NOT TO SCALE 3. ALL DIMENSIONS ARE IN MILLIMETERS 4. DIMENSIONS OF EXPOSED PAD ON BOTTOM OF PACKAGE DO NOT INCLUDE MOLD FLASH. MOLD FLASH, IF PRESENT, SHALL NOT EXCEED 0.15mm ON ANY SIDE 5. EXPOSED PAD SHALL BE SOLDER PLATED 6. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON TOP AND BOTTOM OF PACKAGE (DJC) DFN 0605 PIN #1 NOTCH R0.30 TYP OR 0.25mm × 45° CHAMFER