TECHNICAL CHARACTERISTICS 1 4,0 6,0 1,7 2 0,6 3 2,75 4 2,75 2,7 0,7 O 0,75 +0,1 -0 SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 1OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Bounce: 10ms max. 4 MATERIAL >Cover: Stainless Steel >Stem: PA46, UL HB >Frame: PA46, UL HB, color Black >Contact: Stainless Steel with silver >Terminal: Copper alloy with silver plating >Tape: Polyimide tape 2 1 3 3,7 P.C.B. MOUNTING PLAN O 0,6 O 0,2 3 0,5 1,4 0,2 1,0 5,5 ±0,2 1,65 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach 1 4 2 SCHEMATIC PACKAGING INFORMATION >Tape & Reel PN 4,7 Force 3,5 160g ± 50gf 220g ± 50gf Color of Stem Life cycle White Black 200.000 100.000 Stroke 0,25 mm ± 0,1 0,30 mm +0,1 / -0,2 4,5 ±0,2 436 353 045 816 436 333 045 822 Scale - 5:1 2,6 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Date e d c In addition, even electronic component in general electronic equipments, b when used in electrical circuits that require high safety, reliability a functions or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV 14-10-30 revised MatchCode 14-07-24 Bounce 10ms max. 14-04-14 remove Contact cladding description warning text FILE 12-06-06 11-10-28 DATE Name Drawn 10-03-22 Jelisarow DaF Checked 10-03-22 Hsu AL DaF WE Würth Elektronik eiCan WJ CAD eiCan WJ BY EDV NO 4363x30458xx.dft Basic material DESCRIPTION WS-TASU 4,7x3,5 mm side push tact switch with boss design, J-Bend SMD version Scale 5:1 Position Drawing.- No. 4363x30458xx SIZE A4 System :Solid Edge V20