TECHNICAL CHARACTERISTICS 1,0 SPECIFICATION >Rating: 20mA, 15VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Stroke: 0.25 +0.05 / - 0.1mm >Bounce: 10ms max. GND 4,6 5,5 4 4,3 3,1 2 1 3 GND 3,8 5,4 MATERIAL >Cover: Copper alloy >Stem: LCP UL 94V-0 >Frame: LCP UL 94V-0, color Black >Contact: Stainless Steel with silver >Terminal: Copper alloy with silver plating >Tape: Polyimide tape P.C.B. MOUNTING PLAN q 3,4 ±0,2 O 2,0 GND 0,5 3,7 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach 0,8 1,2 2,5 5,1 ±0,3 1,5 0,4 0,45 GND 0,5 0,05 ±0,07 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max Grounded Terminal can be effective even if not soldered 4 2 PACKAGING INFORMATION >Tape & Reel 5,0 ±0,15 GND 3 1 5,0 ±0,15 W 4 2 3 1 PN 431 183 015 816 431 153 015 826 GND Force 160g ± 50gf 260g ± 50gf Color of Stem Black White Life cycle 1.000.000 200.000 W SCHEMATIC GND Scale - 5:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection GENERAL TOLERANCE .x = +/- 0,1 14-11-04 DaF Drawn 10-07-13 Checked 10-07-13 Date f remove Contact cladding e revised MatchCode 14-07-24 d c Bounce 10ms max. 14-04-11 DaF 11-10-28 WJ warning text Stroke Tolerance was +/- 0,15 11-08-30 WJ WE eiCan General Tolerance was +/- 0,2 CAD In addition, even electronic component in general electronic equipments, b when used in electrical circuits that require high safety, reliability functions a or performance, the sufficient reliability evaluation-check for the safety must be performed before by the user before usage. REV FILE 11-08-26 DATE AL WJ BY Name Jelisarow Hsu Basic material DESCRIPTION WS-TASV 5x5mm Tact Switch with ground terminal, J-Bend SMD version Scale eiCan Drawing.- No. 4311x30158x6 EDV NO 4311x30158x6.dft 5:1 Position Würth Elektronik SIZE A4 System :Solid Edge V20