The following models are currently available, but not recommended for new designs: CG0402MLA-14KG CG0603MLA-14KE PL IA N T Features M ■ 0402 and 0603 package options *R oH S CO ■ Rated for IEC 61000-4-2, level 4 ■ Withstands multiple ESD strikes ■ Low capacitance and leakage currents for invisible load protection ■ Tape and reel packaging ChipGuard® MLA Series Varistor ESD Clamp Protectors Description The ChipGuard® CG0402MLA and CG0603MLA Series are based on a multilayer metal oxide technology. The MLA family is designed to protect sensitive electronic circuits from the threat of electrostatic discharge ESD. The MLA series is available from 5.5 V to 26 V DC working voltages. The wide operating voltage and temperature range makes this family ideally suited to IC power supplies, signal and control line protection. Electrical Characteristics @ 25 °C (unless otherwise noted) Model Vrms (V) VDC (V) <50 µA CG0402MLA-5.5MG CG0402MLA-14KG CG0402MLA-14LG CG0402MLA-18KG CG0603MLA-5.5ME CG0603MLA-14KE CG0603MLA-18KE CG0603MLA-26KE 4 11 11 14 4 11 14 20 VN Min. (V) VN Max. (V) 1 mA DC 5.5 14 14 18 5.5 14 18 26 6.4 16.2 15.3 19.8 6.4 16.2 19.8 27.9 VC (V) ITM (Max.) (A) WTM (Max.) (J) CP (pF) Typ. 1A@ 8/20 µs @ 8/20 µs 10/1000 µs @ 1 MHz 19 38 30 45 19 35 40 58 20 20 20 20 30 30 30 30 0.05 0.05 0.05 0.05 0.1 0.1 0.1 0.1 270 90 100 85 270 150 130 100 9.6 19.8 20.7 24.2 9.6 19.8 24.2 34.1 Environmental Characteristics Device Symbol Operating Temperature.........................................................................-55 °C to +125 °C Storage Temperature ............................................................................-55 °C to +125 °C Response Time........................................................................................................ <1 ns Standard ....................................................................................... IEC 61000-4-2 Level 4 These products are RoHS compliant. There is some lead contained within the glass of the ceramic. This is acceptable under exemption no. 5 of the RoHS directive (DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment). How to Order CG 0n0n MLA - n.n x x Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. ChipGuard® Product Designator Package Option 0402 = 0402 Package 0603 = 0603 Package Multilayer Series Designator Operating Voltage** 5.5 = 5.5 V 14 = 14 V 18 = 18 V 26 = 26 V Tolerance K = 10 % L = 15 % M = 20 % Tape & Reel Packaging E = 4,000 pcs. per reel (CG0603MLA Series) G = 10,000 pcs. per reel (CG0402MLA Series) Ni barrier terminations are standard on all ChipGuard® part numbers. ** Only models lower than 10 volts require decimal point. ChipGuard® MLA Series Varistor ESD Clamp Protectors Voltage-Current Characteristics 10 2 CG0402MLA-18KG CG0402MLA-14KG Voltage (Volts) CG0402MLA-5.5MG CG0402MLA-18KG 10 1 CG0402MLA-14KG CG0402MLA-5.5MG 10 0 10-8 10-7 10-6 10-5 10-4 10-3 10-2 SOURCE = DC 10-1 10 0 10 1 10 2 10 3 10 4 SOURCE = 8/20 μs PULSE, IPEAK I Current (Amps) CG0603MLA-18KE 10 2 CG0603MLA-14KE Voltage (Volts) CG0603MLA-5.5ME CG0603MLA-18KE 10 1 CG0603MLA-14KE CG0603MLA-5.5ME 10 0 10-8 10-7 10-6 10-5 SOURCE = DC 10-4 10-3 10-2 10-1 10 0 10 1 10 2 10 3 10 4 SOURCE = 8/20 μs PULSE, IPEAK I Current (Amps) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. ChipGuard® MLA Series Varistor ESD Clamp Protectors Product Dimensions Recommended Pad Layout A A W DIMENSIONS: MM (INCHES) B L B C D CG0402MLA Series CG0603MLA Series L 1.00 ± 0.15 (0.04 ± 0.006) 1.60 ± 0.20 (0.064 ± 0.008) W 0.50 ± 0.10 (0.02 ± 0.004) A B Dimension CG0402MLA Series CG0603MLA Series A 0.51 (0.020) 0.76 (0.030) 0.80 ± 0.20 (0.032 ± 0.008) B 0.61 (0.024) 1.02 (0.040) 0.50 ± 0.10 (0.02 ± 0.004) 0.80 ± 0.20 (0.032 ± 0.008) C 0.51 (0.020) 0.50 (0.020) 0.25 ± 0.15 (0.10 ± 0.006) 0.30 ± 0.20 (0.012 ± 0.008) D 1.70 (0.067) 2.54 (0.100) Dim. Solder Reflow Recommendations 300 Preheat Stages 1-3 Soldering Cooling A Stage 1 Preheat Temperature (°C) 250 200 150 30-70 sec. 60 s to 120 s B Stage 2 Preheat 140 °C to 160 °C Stage 3 Preheat Preheat to 200 °C 20 s to 40 s D Main Heating 200 °C 210 °C 220 °C 230 °C 240 °C 60 s to 70 s 55 s to 65 s 50 s to 60 s 40 s to 50 s 30 s to 40 s E Cooling 200 °C to 100 °C 1 °C/s to 4 °C/s 50 110 sec. (min.) 30 s to 60 s C 100 0 Ambient to Preheating Temperature 120 sec. (min.) Time (seconds) • • • • This product can be damaged by rapid heating, cooling or localized heating. Heat shocks should be avoided. Preheating and gradual cooling recommended. Excessive solder can damage the device. Print solder thickness of 150 to 200 um recommended. Solder gun tip temperature should be kept below 280 °C and should not touch the device directly. Contact should be less than 3 seconds. A solder gun under 30 watts is recommended. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. ® 3312 - 2 mm SMD Trimming Potentiometer ChipGuard MLA Series Varistor ESD Clamp Protectors Packaging Dimensions 13.0 ± 1.0 (0.52 ± 0.04) 8.00 ± 0.30 (0.32 ± 0.012) 4.00 ± 0.10 (0.16 ± 0.004) C 1.50 ± 0.10 (0.06 ± 0.004) 62.0 ± 1.50 (2.48 ± 0.06) 2.0 ± 0.50 (0.08 ± 0.02) L 13.0 ± 0.50 (0.52 ± 0.02) TOP TAPE G D 21.0 ± 0.80 (0.84 ± 0.032) 3.50 ± 0.05 (0.14 ± 0.002) W NOTES: TAPE MATERIAL IS PAPER. 0.48 ± 0.03 TAPE THICKNESS IS (0.019 ± 0.0012) COVER TAPE ADHESION IS 40 ± 15 GRAMS. DIMENSIONS: 180.8 ± 2.0 (7.12 ± 0.08) MM (INCHES) 9.0 ± 0.50 (0.36 ± 0.02) CG0402MLA Series CG0603MLA Series C 1.75 ± 0.05 (0.04 ± 0.002) 1.75 ± 0.10 (0.04 ± 0.004) D 2.00 ± 0.02 (0.08 ± 0.0008) 2.00 ± 0.05 (0.08 ± 0.002) L 1.19 ± 0.05 (0.047 ± 0.002) 1.80 ± 0.20 (0.072 ± 0.008) W 0.69 ± 0.05 (0.027 ± 0.002) 0.90 ± 0.20 (0.036 ± 0.008) G 2.0 ± 0.05 (0.08 ± 0.002) 4.0 ± 0.05 (0.16 ± 0.002) Dimension REV. M 01/16 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.