Bourns Surge Protective Devices (SPDs) Short Form Brochure

Bourns® Surge
Protective Devices (SPDs)
Short Form Brochure
Bourns® SPD Overview
Building on our expertise in circuit protection devices and
technology, Bourns now offers four major families of Surge
Protective Devices (SPDs). SPDs are stand-alone protection
devices or modules that incorporate one or more circuit
protection technologies.
AC and DC Surge Protective Devices
AC and DC SPDs are designed to meet the surge protection
needs of low-voltage installations. Designed for mounting on
DIN Rails, these SPDs are easy to install in standardized panels
and cabinets. These products are modular in design and employ
thermal disconnection devices, visual indicators and remote
signalling capabilities which allow for total operation safety.
Signal and Data Line Surge Protective Devices
Bourns® Signal and Data Line SPDs are designed to shield
sensitive equipment connected to signal and data line interfaces
from damage or disruption caused by transient surges. These
protectors are heavy duty, multi-stage protectors that employ
Bourns® GDT, Bourns® TBU® HSP and silicon technologies.
These protectors are generally installed as close as possible to the
sensitive equipment being protected.
Coaxial Surge Protective Devices
Coaxial SPDs are designed to protect sensitive equipment
connected to coaxial lines. Coaxial SPDs are used in applications
such as computer networks, CATV, antennas, WiMax, GSM,
GPS, microwave and cellular. Bourns® coaxial SPDs are
also available in weatherized enclosures for residential and
commercial installations.
Bourns® SPD offering includes AC Surge Protective Devices, DC
Surge Protective Devices, Signal and Data Line Surge Protective
Devices and Coaxial Surge Protective Devices.
Accessories
4030 Test Set
• Test Set used to verify operation of the SPD installed
in the field
Bourns® Model 4030-0x Surge Protector Test Set is a
handheld, battery-operated tester designed to measure the
clamping voltage and DC breakdown voltage of most SPDs.
The Model 4030-0x is suitible for testing GDTs, carbon
gaps, MOVs, Zener and avalanche diodes and thyristors as
components and complete protectors.
1200TA
• Terminal Adapter for the 1210 and 1250 Series SPDs
Bourns® Model 1200TA Terminal Adapter is designed to
improve the wiring efficiency of Model 1210 and 1250
Series SPDs. This add-on adaptor allows for efficient and
safe parallel connections. This method of connection is
highly recommended and minimizes voltage drops in
parallel connections.
Bus Bar
• Bus Bar for 1210 and 1250 Series SPDs
Bourns® Model 1200 Series Bus Bar accessory provides a
quick solution for combining the ground connection on two
to four Model 1210 or 1250 Series single pole SPD devices.
The bus bar is installed at the bottom of the SPD providing
a bridge that connects the individual ground points. After
installation of the bus bar, a single ground wire can then be
used to complete the installation.
Bourns® SPD Product Overview
AC Surge Protective Devices
1210 Series
•
•
•
•
Type 2-pole DIN Rail AC SPD
1-pole and multi-pole surge protectors
Pluggable
100 kA rated
1250 Series
•
•
•
•
1200TA
• Terminal adapters for 1210 and 1250 Series
Bus Bar
• Bus Bar in configurations of 2, 3 and 4
Type 2-pole DIN Rail AC SPD
1-pole and multi-pole surge protectors
Pluggable
50 kA rated
DC Power Surge Protective Devices
1320 Series
• DIN Rail SPD for 48 V, 75 V or 110 V DC powered equipment
20 Series
• DIN Rail SPD for photovoltaic systems
Signal and Data Line Surge Protective Devices
1500 Series
• SPD for exposed Gigabit Ethernet, DIN Rail or wall mount
1669 Series
• SPD for transmitter and instrumentation, 24-28 V, 4-20 mA
control loops
1800 Series
• DIN Rail SPD for RS-232, RS-422, RS-423, RS-485, 20 mA
and 50 mA instrument loops
1830 Series
• DIN Rail SPD for T1/E1 applications
Coaxial Surge Protective Devices
1965 Series
• SPD for RF applications from DC-1 GHz, 50 Ohms
1977 Series
• SPD for RF applications from CDC- 4 GHz, 50 or 75 Ohms
1740 Series
• SPD for RF applications from DC-1.25 GHz, 75 Ohms
7041 Series
• Enclosure for 1740 SPD
7004C Series
• Enclosure for 1740 SPD and optional data line/telco line
protection
Bourns® SPD Product Data
AC / DC Surge Protective Devices
Device
Series
Configuration
1-Pole
2-Pole
Type 4 construction, Type 2
application per UL 1449 3rd
Edition:
Type 2 per EN61643-11 and
IEC61643-11
1210 Series
3-Pole
4-Pole
AC Surge
Protective
Devices
(SPDs)
1-Pole
2-Pole
Type 4 construction, Type 2
application per UL 1449 3rd
Edition:
Type 2 per EN61643-11 and
IEC61643-11
1250 Series
3-Pole
4-Pole
DC Power
Surge
Protective
Devices
(SPDs)
1320 Series
1420 Series
Type 4 construction, Type 2
application per UL 1449 3rd
Edition:
Low Voltage SPD Test Class II per
EN61643-11 and IEC61643-11
Type 4 construction, Type 2
application per UL 1449 3rd
Edition:
Low Voltage SPD Test Class II per
EN61643-11 and IEC61643-11
1-Pole
1-Pole
AC Network
Imax*
1210-1S-120
1210-1S-230
1210-1S-400
1210-1S-600
1210-2S-120
1210-2S-230
1210-2S-400
1210-2S-600
1210-3S-120
1210-3S-230
1210-3S-400
1210-3S-600
1210-2S-120
1210-2S-230
1210-2S-400
1210-2S-600
1250-1S-120
1250-1S-230
1250-1S-400
1250-1S-600
1250-2S-120
1250-2S-230
1250-2S-400
1250-2S-600
1250-3S-120
1250-3S-230
1250-3S-400
1250-3S-600
1250-2S-120
1250-2S-230
1250-2S-400
1210-2S-600
120/240 V, 120/208 V - Single Phase
220/380 V, 240/415 V - Single Phase
220/380 V, 277/480 V, 347/600V - Single Phase
480 V/600 V - Single Phase
120/240 V, 120/208 V - Single Phase
220/380 V, 240/415 V - Single Phase
220/380 V, 277/480 V, 347/600 V - Single Phase
480 V/600 V - Single Phase
120/240 V, 120/208 V - 3-Phase
220/380 V, 240/415 V - 3-Phase
220/380 V, 277/480 V, 347/600 V - 3-Phase
480 V/600 V - 3-Phase
120/240 V, 120/208 V - 3-Phase + N
220/380 V, 240/415 V - 3-Phase + N
220/380 V, 277/480 V, 347/600 V - 3-Phase + N
480 V/600 V - 3-Phase + N
120/240 V, 120/208 V - Single Phase
220/380 V, 240/415 V - Single Phase
220/380 V, 277/480 V, 347/600 V - Single Phase
480 V/600 V - Single Phase
120/240 V, 120/208 V - Single Phase
220/380 V, 240/415 V - Single Phase
220/380 V, 277/480 V, 347/600 V - Single Phase
480 V/600 V - Single Phase
120/240 V, 120/208 V - 3-Phase
220/380 V, 240/415 V - 3-Phase
220/380 V, 277/480 V, 347/600 V - 3-Phase
480 V/600 V - 3-Phase
120/240 V, 120/208 V - 3-Phase + N
220/380 V, 240/415 V - 3-Phase + N
220/380 V, 277/480 V, 347/600 V - 3-Phase + N
480 V/600 V - 3-Phase + N
1320-S-48
1320-S-75
1320-S-110
48 VDC
75 VDC
110 VDC
1420-PV-1000
100 kA
General duty SPD designed to
be installed at the beginning
of the installation, in the main
switchboard, or close to sensitive
terminals, on installations without
LPS (Lightning Protection System)
50 kA
30 kA
40 kA
40 kA
1000 VDC
40 kA
L/N
L/N
L/N
L/N
L/N
L/N
L/N
L/N
L/N
L/N
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
AC Surge
Protector
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
SPD1210-xxx
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
Uc
In
Imax
Up
2-Pole
3-Pole
Description
Heavy duty SPD designed to
be installed at the beginning
of the installation, in the main
switchboard, or close to sensitive
terminals, on installations without
LPS (Lightning Protection System)
AC Surge
Protector
1-Pole
Figure 1
Part
Numbers
Type
SPD designed to protect DC power
systems from damage due to
lightning and power surges
DC powered SPD designed to
protect photovoltaic systems
operating up to 1200 VDC
4-Pole
SPD 1210 and 1250 Series Configurations
*AC & DC Surge Protective Devices are designed to meet the surge protection needs of low-voltage installations. Designed for mounting on DIN Rails, these SPDs are easy to install in standardized panels and cabinents.
These products are modular in design and employ thermal disconnection devices, visual indicators and remote signalling capabilities which allow for total opeation safety.
Signal and Data Line Surge Protective Devices
Photo
Base Model
Number
Application
Mounting
Details
1169-01
1669-02
1669-05
1669-06
1810-10-xx
1811-10-xx
1820-10-xx
1821-10-xx
1810-15-xx
1811-15-xx
1820-15-xx
1821-15-xx
1810-28-xx
1811-28-xx
1820-28-xx
1821-28-xx
1810-50-xx
1820-50-xx
4-20 mA
4-20 mA
4-20 mA
4-20 mA
RS-422
RS-232
RS-485
4-20 mA
Interface Operating Characteristics
Max. DC
Current
Typical Capacitance
Series Resistance
Peak Signal
Voltage L/L
(Volts)
Peak Signal
Voltage L/G
(Volts)
Max. Data
Rate (MHz)
(mA)
L/G
(pF)
L/L
(pF)
Each Line Input to Output
(Ohms)
28
28
28
28
20
20
10
10
30
30
15
15
56
56
28
28
100
50
28
28
28
28
10
10
10
10
15
15
15
15
28
28
28
28
50
50
4
4
4
4
10
50
4
50
8
45
3
45
9
40
4
40
10
4
150
150
150
150
220
350
220
350
180
300
180
300
150
250
150
250
100
100
1800
1800
1800
1800
2200
45
3300
65
1500
45
2300
65
1100
45
1800
65
500
800
1800
1800
1800
1800
1200
45
3300
65
750
45
2300
65
600
45
1800
65
300
800
22
22
22
22
10
10
10
10
15
15
15
15
22
22
22
22
51
51
1830-T1E1
T1E1
12
170
2.048 Mbits/s
100
75
75
10
1500-1x-x
Ethernet
7
7
1 Gbit/s
200
n/a
10
12
1500-2x-x
Ethernet
7
7
1 Gbit/s
200
n/a
10
12
Coaxial Surge Protective Devices
Photo
Base Model
Number
Application
Characteristic Impedence
Frequency
Range
Insertion
Loss
Connectors
1965-xx-Axx
UHF, VHF transmitters, 2-way base
stations, tranceivers
50 Ω
DC-1 GHz
< 0.2 dB
N, BNC, UHF
1977-xx-xxx
Antenna, broadband, microwave, GPS,
cellular, CATV
50 Ω - N-type connector
75 Ω - F-type connector
DC-4 GHz
1740-xx
CATV, satellite video
75 Ω
7041-1x-xx
Residential: Combines 1740 Coaxial SPD
into a compact residential enclosure
7004C-0X-X X-XX
Residential or commercial: 1740 coaxial
SPD housed in a weather resistant
enclosure. Solution provides voice, data
and video protection.
<0.1 dB
N,F
DC-1.25 GHz
<0.45 dB
F-type
75 Ω
DC-1.25 GHz
<0.45 dB
F-type
75 Ω
DC-1.25 GHz
<0.45 dB
F-type
Worldwide Sales Offices
Country/Region
Phone
Fax
Americas:
Brazil:
China:
Europe, Middle East, Africa:
Japan:
Singapore:
Taiwan:
+1-951-781-5500
+55 11 5505 0601
+86 21 64821250
+1-951-781-5006
+55 11 5505 4370
+86 21 64821249
+36 88 520 211
+81 49 269 3297
+65 6348 1272
+886 2 25624116
Other Asia-Pacific Countries:
+886 2 25624117
+886 2 25624116
Technical Assistance
Region
Phone
Fax
Asia-Pacific:
Europe, Middle East, Africa:
Americas:
+886 2 25624117
+36 88 520 390
+1-951-781-5500
+886 2 25624116
+36 88 520 211
+1-951-781-5700
www.bourns.com
Bourns® products are available through an extensive network of manufacturer’s representatives, agents and distributors.
To obtain technical applications assistance, a quotation, or to place an order, contact a Bourns representative in your area.
Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in
different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
“Bourns” is a registered trademark of Bourns, Inc. in the U.S. and other countries.
“TBU” is a registered trademark of Bourns, Inc. in the U.S. and other countries, except Japan.
All references to TBU® in this document for use in Japan shall be deemed to be replaced with Bourns® TBU™.
COPYRIGHT© 2014, BOURNS, INC. • LITHO IN U.S.A. • WAG • 02/14 • 5M/SPD1402