PL IA N T Features CO M ■ Formerly The P650-U & P850-U Series are obsolete and not recommended for new designs. Bourns® TBU-DT Series is preferred. brand *R oH S ■ Extremely high speed performance ■ Blocks high voltages and currents ■ Low insertion loss ■ Two TBU® protectors in one small package ■ Very high bandwidth; GHz compatible ■ RoHS compliant*, UL Recognized P650-U and P850-U Series TBU® High-Speed Protectors Transient Blocking Units - TBU® Devices ® Bourns Model P650-U and P850-U products are high-speed, unidirectional protection components, constructed using MOSFET semiconductor technology, designed to protect against faults caused by short circuits, AC power cross, induction and lightning surges. The TBU® high-speed protector, triggering as a function of the MOSFET, blocks surges and provides an effective barrier behind which sensitive electronics are not exposed to large voltages or currents during surge events. The TBU® device is provided in a surface mount DFN package and meets industry standard requirements such as RoHS and Pb Free solder reflow profiles. Agency Approval UL recognized component File # E315805. Industry Standards Description Telcordia Model Port Type 3, 5 P650-U Port Type 2, 4 P850-U GR-1089 K.20, K.20E, K.21, K.21E, K.45 ITU-T E T E L O S B O P850-U Absolute Maximum Ratings (Tamb = 25 °C) Symbol Parameter Value Unit 650 850 V 300 425 V Vimp Maximum protection voltage for impulse faults with rise time ≥ 1 μsec P650-Uxxx-WH P850-Uxxx-WH Vrms Maximum protection voltage for continuous Vrms faults connected as a series pair (refer to page 3 Test Configuration Diagram) P650-Uxxx-WH P850-Uxxx-WH Top Operating temperature range -40 to +85 °C Tstg Storage temperature range -65 to +150 °C Electrical Characteristics (Tamb = 25 °C) Symbol Parameter Min. Iop Maximum current through the device that will not cause current blocking P650-U180-WH P650-U260-WH P850-U180-WH P850-U260-WH Itrigger Typical current for the device to go from normal operating state to protected state P650-U180-WH P650-U260-WH P850-U180-WH P850-U260-WH Iout Maximum current through the device P650-U180-WH P650-U260-WH P850-U180-WH P850-U260-WH Rdevice Series resistance of the TBU® device P650-Uxxx-WH P850-Uxxx-WH Rbal Line-to line series resistance difference between two TBU® devices tblock Maximum time for the device to go from normal operating state to protected state Iquiescent Current through the triggered TBU® device with 50 Vdc circuit voltage Vreset Voltage below which the triggered TBU® device will transition to normal operating state Typ. Max. Unit 180 260 180 260 mA 220 330 220 330 6 8 P650-Uxxx-WH P850-Uxxx-WH mA 360 520 360 520 mA 7 9 Ω 0.5 Ω 1 μs 1 P650-Uxxx-WH P850-Uxxx-WH mA 11 14 ® V ® The P-U Series TBU devices are unidirectional; specifications are valid for input direction only. For the output direction, the TBU device is a resistor. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Applications ■ Mb Ethernet port protection ■ Gb Ethernet port protection ■ Isolated and floating interfaces P650-U and P850-U Series TBU® High-Speed Protectors Typical Performance Characteristics Time to Block vs. Fault Current V-I Characteristics I 1 Trigger Current 0.1 1/R Time to Block (sec) ITRIG 0.01 0.001 0.0001 E T E L O S B O V Reset Voltage Threshold 0.00001 0.000001 0.0000001 0.1 1 10 100 1000 Fault Current (A ) Trigger Current vs. Temperature 140 % of Trigger Current 120 100 80 60 40 20 -40 -20 0 20 40 60 80 Temperature (°C) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. P650-U and P850-U Series TBU® High-Speed Protectors Operational Characteristics The graphs below demonstrate the operational characteristics of the TBU® protector. For each graph the fault voltage, protected side voltage, and current is presented. V1 V2 Load TEST CONFIGURATION DIAGRAM P650-U Lightning, 650 V P850-U Lightning, 850 V E T E L O S B O 3 200 mA/div. 100 V/div. 200 mA/div. 100 V/div. 3 2 2 1 1 1 us/div. 1 us/div. Ch1 V1 Ch2 V2 Ch3 Current Ch1 V1 P650-U Power Fault, 120 Vrms, 25 A Ch2 V2 Ch3 Current P850-U Power Fault, 230 Vrms, 25 A 3 2 3 200 mA/div. 100 V/div. 100 V/div. 200 mA/div. 2 1 1 Ch1 V1 4 ms/div. Ch2 V2 4 ms/div. Ch3 Current Ch1 V1 Ch2 V2 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Ch3 Current P650-U and P850-U Series TBU® High-Speed Protectors Product Dimensions L J E K J B Dim. G F C A N B 4 5 6 H C A P 3 2 1 H D E PIN 1 E T E L O S B O D TOP VIEW N SIDE VIEW F BOTTOM VIEW G Recommended Pad Layout 0.50 (.020) 2.525 (.099) 1.25 (.049) 0.70 (.028) 0.575 (.023) 4.275 (.168) 0.375 (.015) H Pad Designation Pad # Apply 1 In1 2 NC 3 Out1 4 Out2 5 NC 6 In2 J K L N NC = Solder to PCB; do not make electrical connection, do not connect to ground. TBU® devices have matte-tin termination finish. Suggested layout should use non-solder mask define (NSMD). Recommended stencil thickness is 0.10-0.12 mm (.004-.005 in.) with stencil opening size 0.025 mm (.0010 in.) less than the device pad size. As when heat sinking any power device, it is recommended that, wherever possible, extra PCB copper area is allowed. For minimum parasitic capacitance, do not allow any signal, ground or power signals beneath any of the pads of the device. P Q DIMENSIONS: Rth(j-a) Value Unit Junction to leads (package) Parameter 105 °C/W Junction to leads (per TBU® device) 202 °C/W Typ. 6.25 (.246) 7.75 (.305) 0.85 (.033) 0.025 (.001) 0.55 (.022) 1.25 (.049) 4.25 (.167) 2.50 (.098) 0.25 (.010) 0.50 (.020) 0.70 (.028) 0.25 (.010) 0.75 (.030) 3.25 (.128) Max. 6.35 (.250) 7.85 (.309) 0.90 (.035) 0.050 (.002) 0.60 (.024) 1.30 (.051) 4.30 (.169) 2.55 (.100) 0.30 (.012) 0.55 (.022) 0.75 (.030) 0.30 (.012) 0.80 (.031) 3.30 (.130) MM (INCHES) Block Diagram Thermal Resistances Symbol Min. 6.15 (.242) 7.65 (.301) 0.80 (.031) 0.000 (.000) 0.50 (.020) 1.20 (.047) 4.20 (.165) 2.45 (.096) 0.20 (.008) 0.45 (.018) 0.65 (.026) 0.20 (.008) 0.70 (.028) 3.20 (.126) Line Side 6 4 1 3 TBU® Device Load Side Reflow Profile Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat - Temperature Min. (Tsmin) - Temperature Max. (Tsmax) - Time (tsmin to tsmax) Time maintained above: - Temperature (TL) - Time (tL) Peak/Classification Temperature (Tp) Time within 5 °C of Actual Peak Temp. (tp) Ramp-Down Rate Time 25 °C to Peak Temperature Pb-Free Assembly 3 °C/sec. max. 150 °C 200 °C 60-180 sec. 217 °C 60-150 sec. 260 °C 20-40 sec. 6 °C/sec. max. 8 min. max. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3312 - and 2 mm SMDSeries Trimming Potentiometer P650-U P850-U TBU® High-Speed Protectors How to Order Typical Part Marking MANUFACTURER’S TRADEMARK* P 650 - U 180 - WH MARKING NUMBER 65UB = P650-U180-WH 65UC = P650-U260-WH 85UB = P850-U180-WH 85UC = P850-U260-WH Form Factor P = Two TBU® protectors in one device Impulse Voltage Rating 650 = 650 V 850 = 850 V Directional Indication for Paired Devices U = Unidirectional Iop Indicator 180 = 180 mA 260 = 260 mA PIN 1 MANUFACTURING DATE CODE* - 1ST DIGIT INDICATES THE YEAR’S 6-MONTH PERIOD. - 2ND DIGIT INDICATES THE WEEK NUMBER IN THE 6-MONTH PERIOD. - 3RD & 4TH DIGITS INDICATE SPECIFIC LOT FOR THE WEEK. E T E L O S B O 6-MONTH PERIOD CODES: A = JAN-JUN 2009 C = JAN-JUN 2010 B = JUL-DEC 2009 D = JUL-DEC 2010 E = JAN-JUN 2011 F = JUL-DEC 2011 EXAMPLE: ARBC - 1ST DIGIT ‘A’ = JAN-JUN 2009 - 2ND DIGIT ‘R’ = WEEK 18; WEEK OF APRIL 27 - 3RD & 4TH DIGITS ‘BC’ = LOT SPECIFIC INFORMATION *TRANSITION FROM FULTEC TRADEMARK AND LOT CODE TO BOURNS TRADEMARK AND DATE CODE IN 2009. Packaging Specifications (per EIA468-B) P0 B A D t E P2 TOP COVER TAPE N F W C D B0 K0 CENTER LINES OF CAVITY A0 P D1 EMBOSSMENT G (MEASURED AT HUB) USER DIRECTION OF FEED QUANTITY: 3000 PIECES PER REEL A Device Min. 326 (12.835) P650-U, P850-U Device P650-U, P850-U Device P650-U, P850-U A0 Min. 6.5 (.256) B Max. 330.25 (13.002) Min. 1.5 (.059) B0 Max. 6.7 (.264) Min. 8.0 (.315) Min. Max. 1.4 (.055) 1.6 (.063) C Max. 2.5 (.098) Min. 12.8 (.504) Max. 1.6 (.063) Min. 1.5 (.059) D D Max. 13.5 (.531) Min. 20.2 (.795) Max. Min. 1.65 (.065) D1 - G Ref. 16.5 (.650) Max. 1.85 (.073) Min. 7.4 (.291) Max. N Ref. 102 (4.016) E F Max. 8.2 (.323) Min. 1.5 (.059) Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 11.9 (.469) 12.1 (.476) 3.9 (.159) 4.1 (.161) 1.9 (.075) 2.1 (.083) 0.25 (.010) 0.35 (.014) 15.7 (.618) 16.3 (.642) K0 P P0 P2 t max. 7.6 (.299) W Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. DIMENSIONS: MM (INCHES) P650-U and P850-U Series TBU® High-Speed Protectors Reference Applications A cost-effective protection solution utilizes the Bourns® TBU® protection devices. The diagrams below illustrate common configurations of these components. The graph at the bottom demonstrates the operational characteristics of the circuit. Typical Configuration Diagrams P850-U P850-U V2 Tx Tx V1 G5200AS G5200AS P850-U Tx RJ 45 connector Rx E T E L O S B O Tx RJ 45 connector P850-U Rx P850-U P850-U G5200AS Rx P850-U Rx P850-U G5200AS 2000 V, 22 pF 2000 V, 22 pF GbE Ethernet Protection Up to 6000 V Common-Mode Lightning Protection GbE Ethernet Protection Up to 1500 V Common-Mode Lightning Protection 200 mA/div. 100 V/div. 3 2 1 1 μs/div. Ch1 V1 Ch2 V2 Ch3 Current P850-U with G5200AS 4000 V Lightning 10/700 µsec, 150 A Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com REV. 04/15 “TBU” is a registered trademark of Bourns, Inc. in the United States and other countries. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.