Data Sheet

74ALVC32-Q100
Quad 2-input OR gate
Rev. 1 — 16 May 2014
Product data sheet
1. General description
The 74ALVC32-Q100 is a quad 2-input OR gate.
Schmitt trigger action on all inputs makes the device tolerant of slow rise and fall times.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 3) and is suitable for use in automotive applications.
2. Features and benefits
 Automotive product qualification in accordance with AEC-Q100 (Grade 3)
 Specified from 40 C to +85 C
 Wide supply voltage range from 1.65 V to 3.6 V
 3.6 V tolerant inputs/outputs
 CMOS low power consumption
 Direct interface with TTL levels (2.7 V to 3.6 V)
 Power-down mode
 Latch-up performance exceeds 250 mA
 Complies with JEDEC standards:
 JESD8-7 (1.65 V to 1.95 V)
 JESD8-5 (2.3 V to 2.7 V)
 JESD8B/JESD36 (2.7 V to 3.6 V)
 ESD protection:
 MIL-STD-883, method 3015 exceeds 2000 V
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
3. Ordering information
Table 1.
Ordering information
Type number
Package
Temperature range
Name
Description
Version
40 C to +85 C
SO14
plastic small outline package; 14 leads;
body width 3.9 mm
SOT108-1
74ALVC32PW-Q100 40 C to +85 C
TSSOP14
plastic thin shrink small outline package; 14 leads;
body width 4.4 mm
SOT402-1
74ALVC32BQ-Q100 40 C to +85 C
DHVQFN14 plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 14 terminals;
body 2.5  3  0.85 mm
74ALVC32D-Q100
SOT762-1
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
4. Functional diagram
•
•
•
•
$
%
$
%
$
%
$
%
<
<
<
<
PQD
PQD
Fig 1.
Logic symbol
Fig 2.
IEC logic symbol
$
<
%
Fig 3.
PQD
Logic diagram (one gate)
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
2 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
5. Pinning information
5.1 Pinning
$
WHUPLQDO
LQGH[DUHD
9&&
$/9&4
$/9&4
9&&
%
%
%
%
<
$
<
$
$
<
%
<
$
%
<
$
*1'
<
*1'
%
%
<
<
*1'
$
$
DDD
7UDQVSDUHQWWRSYLHZ
DDD
(1) This is not a supply pin. The substrate is attached to this
pad using conductive die attach material. There is no
electrical or mechanical requirement to solder this pad.
However, if it is soldered, the solder land should remain
floating or be connected to GND.
Fig 4.
Pin configuration SO14 and TSSOP14
Fig 5.
Pin configuration DHVQFN14
5.2 Pin description
Table 2.
Pin description
Symbol
Pin
Description
nA
1, 4, 9, 12
data input
nB
2, 5, 10, 13
data input
nY
3, 6, 8, 11
data output
VCC
14
supply voltage
GND
7
ground (0 V)
6. Functional description
Table 3.
Function table[1]
Input nA
Input nB
Output nY
L
L
L
L
H
H
H
L
H
H
H
H
[1]
H = HIGH voltage level
L = LOW voltage level
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
3 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
7. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
VCC
supply voltage
IIK
input clamping current
VI
input voltage
IOK
output clamping current
output voltage
VO
Conditions
VI < 0 V
VO > VCC or VO < 0 V
output HIGH or LOW state
[1] [2]
output 3-state
power-down mode, VCC = 0 V
[2]
Max
Unit
0.5
+4.6
V
50
-
mA
0.5
+4.6
V
-
50
mA
0.5
VCC + 0.5
V
0.5
+4.6
V
0.5
+4.6
V
-
50
mA
100
mA
IO
output current
ICC
supply current
-
IGND
ground current
100
-
mA
Tstg
storage temperature
65
+150
C
-
500
mW
total power dissipation
Ptot
[1]
VO = 0 V to VCC
Min
Tamb = 40 C to +85 C
[3]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2]
When VCC = 0 V (power-down mode), the output voltage can be 3.6 V in normal operation.
[3]
For SO14 packages: above 70 C derate linearly with 8 mW/K.
For TSSOP14 packages: above 60 C derate linearly with 5.5 mW/K.
For DHVQFN14 packages: above 60 C derate linearly with 4.5 mW/K.
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
4 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
8. Recommended operating conditions
Table 5.
Recommended operating conditions
Symbol
Parameter
VCC
Conditions
Min
Max
Unit
supply voltage
1.65
3.6
V
VI
input voltage
0
3.6
V
VO
output voltage
output HIGH or LOW state
0
VCC
V
output 3-state
0
3.6
V
power-down mode; VCC = 0 V
0
3.6
V
Tamb
ambient temperature
in free air
40
+85
C
t/V
input transition rise and fall rate
VCC = 1.65 V to 2.7 V
0
20
ns/V
VCC = 2.7 V to 3.6 V
0
10
ns/V
9. Static characteristics
Table 6.
Static characteristics
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Tamb = 40 C to +85 C
Conditions
Typ[1]
Min
VIH
VIL
VOH
VOL
HIGH-level input voltage
LOW-level input voltage
HIGH-level output voltage
LOW-level output voltage
Unit
Max
VCC = 1.65 V to 1.95 V
0.65  VCC -
-
V
VCC = 2.3 V to 2.7 V
1.7
-
-
V
VCC = 2.7 V to 3.6 V
2.0
-
-
V
VCC = 1.65 V to 1.95 V
-
-
0.35  VCC V
VCC = 2.3 V to 2.7 V
-
-
0.7
V
VCC = 2.7 V to 3.6 V
-
-
0.8
V
IO = 100 A; VCC = 1.65 V to 3.6 V
VCC  0.2
-
-
V
VI = VIH or VIL
IO = 6 mA; VCC = 1.65 V
1.25
1.51
-
V
IO = 12 mA; VCC = 2.3 V
1.8
2.10
-
V
IO = 18 mA; VCC = 2.3 V
1.7
2.01
-
V
IO = 12 mA; VCC = 2.7 V
2.2
2.53
-
V
IO = 18 mA; VCC = 3.0 V
2.4
2.76
-
V
IO = 24 mA; VCC = 3.0 V
2.2
2.68
-
V
-
-
0.2
V
VI = VIH or VIL
IO = 100 A; VCC = 1.65 V to 3.6 V
IO = 6 mA; VCC = 1.65 V
-
0.11
0.3
V
IO = 12 mA; VCC = 2.3 V
-
0.17
0.4
V
IO = 18 mA; VCC = 2.3 V
-
0.25
0.6
V
IO = 12 mA; VCC = 2.7 V
-
0.16
0.4
V
IO = 18 mA; VCC = 3.0 V
-
0.23
0.4
V
IO = 24 mA; VCC = 3.0 V
-
0.30
0.55
V
II
input leakage current
VCC = 3.6 V; VI = 3.6 V or GND
-
0.1
5
A
IOFF
power-off leakage current
VCC = 0 V; VI or VO = 0 V to 3.6 V
-
0.1
10
A
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
5 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
Table 6.
Static characteristics …continued
At recommended operating conditions. Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Tamb = 40 C to +85 C
Conditions
Typ[1]
Min
Unit
Max
ICC
supply current
VCC = 3.6 V; VI = VCC or GND;
IO = 0 A
-
0.2
10
A
ICC
additional supply current
per input pin; VCC = 3.0 V to 3.6 V;
VI = VCC  0.6 V; IO = 0 A
-
5
750
A
CI
input capacitance
-
3.5
-
pF
[1]
All typical values are measured at VCC = 3.3 V (unless stated otherwise) and Tamb = 25 C.
10. Dynamic characteristics
Table 7.
Dynamic characteristics
Voltages are referenced to GND (ground = 0 V). For test circuit, see Figure 7.
Symbol
Parameter
propagation delay
tpd
Tamb = 40 C to +85 C
Conditions
CP to Qn; see Figure 6
Max
1.0
2.8
4.7
Unit
ns
VCC = 2.3 V to 2.7 V
1.0
2.0
3.1
ns
VCC = 2.7 V
1.0
2.2
2.9
ns
1.0
2.0
2.8
ns
-
25
-
pF
VCC = 3.0 V to 3.6 V
power dissipation
capacitance
Typ[1]
[2]
VCC = 1.65 V to 1.95 V
CPD
Min
per gate; VI = GND to VCC; VCC = 3.3 V
[1]
Typical values are measured at Tamb = 25 C
[2]
tpd is the same as tPHL and tPLH.
[3]
CPD is used to determine the dynamic power dissipation (PD in W).
[3]
PD = CPD  VCC2  fi  N + (CL  VCC2  fo) where:
fi = input frequency in MHz; fo = output frequency in MHz
CL = output load capacitance in pF
VCC = supply voltage in Volts
N = number of inputs switching
(CL  VCC2  fo) = sum of the outputs
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
6 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
11. Waveforms
VI
VM
nA, nB input
GND
t PHL
nY output
t PLH
VM
mna244
Measurement points are given in Table 8.
Fig 6.
Table 8.
Inputs nA, nB to output nY propagation delay times
Measurement points
Supply voltage VCC
Input VI
VM
1.65 V to 1.95 V
VCC
0.5VCC
2.3 V to 2.7 V
VCC
0.5VCC
2.7 V
2.7 V
1.5 V
3.0 V to 3.6 V
2.7 V
1.5 V
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
7 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
W:
9,
QHJDWLYH
SXOVH
90
90
9
WI
WU
WU
WI
9,
SRVLWLYH
SXOVH
90
90
9
W:
9(;7
9&&
*
9,
5/
92
'87
57
5/
&/
DDH
Test data is given in Table 9.
Definitions for test circuit:
RL = Load resistance.
CL = Load capacitance including jig and probe capacitance.
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
VEXT = External voltage for measuring switching times.
Fig 7.
Table 9.
Test circuitry for measuring switching times
Test data
Supply voltage VCC
Input
Load
VEXT
VI
tr, tf
CL
RL
tPLH, tPHL
tPLZ, tPZL
tPHZ, tPZH
1.65 V to 1.95 V
VCC
 2.0 ns
30 pF
1 k
open
2  VCC
GND
2.3 V to 2.7 V
VCC
 2.0 ns
30 pF
500 
open
2  VCC
GND
2.7 V
2.7 V
 2.5 ns
50 pF
500 
open
6V
GND
3.0 V to 3.6 V
2.7 V
 2.5 ns
50 pF
500 
open
6V
GND
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
8 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
12. Package outline
62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP
627
'
(
$
;
F
\
+(
Y 0 $
=
4
$
$
$
$
SLQLQGH[
ș
/S
/
H
GHWDLO;
Z 0
ES
PP
VFDOH
',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
81,7
$
PD[
$
$
$
ES
F
'
(
H
+(
/
/S
4
Y
Z
\
=
PP
LQFKHV ș
R
R
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG
Fig 8.
5()(5(1&(6
287/,1(
9(56,21
,(&
-('(&
627
(
06
-(,7$
(8523($1
352-(&7,21
,668('$7(
Package outline SOT108-1 (SO14)
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
9 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP
'
627
(
$
;
F
\
+(
Y 0 $
=
4
$
SLQLQGH[
$
$
$
ș
/S
/
H
GHWDLO;
Z 0
ES
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7
$
PD[
$
$
$
ES
F
'
(
H
+(
/
/S
4
Y
Z
\
=
ș
PP
R
R
1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
287/,1(
9(56,21
627
Fig 9.
5()(5(1&(6
,(&
-('(&
-(,7$
(8523($1
352-(&7,21
,668('$7(
02
Package outline SOT402-1 (TSSOP14)
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
10 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
'+94)1SODVWLFGXDOLQOLQHFRPSDWLEOHWKHUPDOHQKDQFHGYHU\WKLQTXDGIODWSDFNDJHQROHDGV
627
WHUPLQDOVERG\[[PP
%
'
$
$
(
$
F
GHWDLO;
WHUPLQDO
LQGH[DUHD
WHUPLQDO
LQGH[DUHD
&
H
H
E
\
\ &
Y 0 & $ %
Z 0 &
/
(K
H
'K
;
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7
PP
$
PD[
$
E
F
'
'K
(
(K
H
H
/
Y
Z
\
\
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
5()(5(1&(6
287/,1(
9(56,21
,(&
-('(&
-(,7$
627
02
(8523($1
352-(&7,21
,668('$7(
Fig 10. Package outline SOT762-1 (DHVQFN14)
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
11 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
13. Abbreviations
Table 10.
Abbreviations
Acronym
Description
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
MIL
Military
MM
Machine Model
TTL
Transistor-Transistor Logic
14. Revision history
Table 11.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74ALVC32_Q100 v.1
20140516
Product data sheet
-
-
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
12 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
15. Legal information
15.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
74ALVC32-Q100
Product data sheet
Suitability for use in automotive applications — This NXP
Semiconductors product has been qualified for use in automotive
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer's own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
13 of 15
74ALVC32-Q100
NXP Semiconductors
Quad 2-input OR gate
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
16. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74ALVC32-Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 16 May 2014
© NXP Semiconductors N.V. 2014. All rights reserved.
14 of 15
NXP Semiconductors
74ALVC32-Q100
Quad 2-input OR gate
17. Contents
1
2
3
4
5
5.1
5.2
6
7
8
9
10
11
12
13
14
15
15.1
15.2
15.3
15.4
16
17
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 1
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3
Functional description . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Recommended operating conditions. . . . . . . . 5
Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
Dynamic characteristics . . . . . . . . . . . . . . . . . . 6
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12
Legal information. . . . . . . . . . . . . . . . . . . . . . . 13
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contact information. . . . . . . . . . . . . . . . . . . . . 14
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP Semiconductors N.V. 2014.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 16 May 2014
Document identifier: 74ALVC32-Q100