HDN (Military RNR/RNN) www.vishay.com Vishay Angstrohm Metal Film Resistors, Military/Established Reliability, Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision, Type RNR, Characteristics E and C FEATURES • Qualified to MIL-PRF-55182 characteristics E and C (E only for RNR75) • Performance exceeds MIL-PRF-55182 the requirements of • “S” level reliability • Hermetic glass enclosure is impervious to harmful environments • Inert gas filled • Low noise (- 40 dB) For the highest degree of reliability, stability and uniformity of construction, Vishay Angstrohm hermetically-sealed metal film resistors are unquestionably the first choice. The true glass-to-metal hermetic enclosure seals the resistor element in an inert gas atmosphere and protects it from virtually all adverse environmental influences. The glass enclosure will withstand in excess of 3000 psi external pressure without leakage. The reliability and stability of Vishay Angstrohm hermetically-sealed resistors have been established by their use in nearly every military, missile, aerospace and oceangraphy program having the most demanding applications and the most hostile environments. • Standard lead on the RNR product is solderable and on the RNN is weldable • MODEL RNC: For characteristics E and C (per MIL-PRF-55182) terminal model RNR shall be used as a substitute. • For MIL-PRF-55182 characteristics J, H, and K product, see Vishay Dale’s ERC (Military RNC/RNR) data sheet (www.vishay.com/doc?31025). STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RESISTANCE POWER POWER MAXIMUM RANGE (2) RANGE (2) LIFE VISHAY MIL RATING RATING TOLERANCE WORKING MIL-PRF-55182 FAILURE ANGSTROHM SPEC. P125 °C STYLE P70 °C ±% VOLTAGE (4) MODEL SHEET ± 50 ppm/°C (1) ± 25 ppm/°C (1) RATE (3) W W V (C) (E) HDN55, HDN55..65 (5) RNR55, RNN55 01 0.125 0.10 0.1, 0.5, 1 200 10 to 1.21M 10 to 1.21M M, P, R, S HDN57, HDN57..1 (5) RNR57, RNN57 02 0.25 0.125 1 250 49.9 to 200K 49.9 to 200K M, P, R, S HDN60, HDN60..1 (5) RNR60, RNN60 03 0.25 0.125 0.1, 0.5, 1 250 10 to 2.49M 10 to 2.49M M, P, R, S HDN65, HDN65..65 (5) RNR65, RNN65 05 0.50 0.25 0.1, 0.5, 1 300 24.9 to 4.99M 24.9 to 4.99M M, P HDN70, HDN70..4 (5) RNR70, RNN70 06 0.75 0.50 0.1, 0.5, 1 350 24.9 to 4.99M 24.9 to 4.99M M, P HDN75, HDN75..1 (5) RNR75, RNN75 10 2.0 1.0 0.1, 0.5, 1 750 - 49.9 to 1.21M M Notes (1) Temperature characteristics E and C designate hermetically-sealed enclosure. (2) Standard resistance values should be selected from the Resistance-Tolerance Decade table. B tolerance available in all values. (3) Contact factory for current QPL failure rates. (4) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (5) Hot solder dipped leads. Revision: 15-Nov-12 Document Number: 66001 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HDN (Military RNR/RNN) www.vishay.com Vishay Angstrohm GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNR55E49R9BSM76 (preferred part number format) R N R 5 5 E 4 9 R 9 MIL STYLE (1) CHARACTERISTIC (2) RESISTANCE VALUE TOLERANCE CODE RNR = Solderable only RNN = Weldable only (see Standard Electrical Specifications table) E = 25 ppm C = 50 ppm 3 digit significant figure, followed by a multiplier Use “R” for values < 100 10R0 = 10 49R9 = 49.9 2152 = 21.5 k 3014 = 3.01 M B = ± 0.1 % D = ± 0.5 % F=±1% B S M 7 FAILURE RATE M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h 6 PACKAGING SPECIAL M76 = Foil bag Blank = Standard (55, 57, 60) (Dash Number) M77 = Foil bag (up to 3 digits) (65, 70, 75) From 1 to 999 BSL = Foil bag, as applicable single lot date code 1 = Hot solder dip RJ7 = T/R (55, 57, 60) (57’s, 60’s, 75’s) RJ8 = T/R (65, 70, 75) 4 = Hot solder dip (70’s) RSL = T/R, single lot 65 = Hot solder date code dip (55’s, 65’s) Historical Part Numbering: RNR55E49R9BS (will continue to be accepted) RNR55 E 49R9 B S MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE FAILURE RATE Notes • For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544). (1) MODEL RNC: For characteristics C and E (per MIL-PRF-55182) terminal model RNR shall be used as a substitute (2) For RNR75 only: Characteristic J (± 25 ppm/°C) is also available % OF RATED POWER POWER DERATING 120 125 °C 100 80 60 40 20 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE IN °C CAGE CODE: 17745 Revision: 15-Nov-12 Document Number: 66001 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HDN (Military RNR/RNN) www.vishay.com Vishay Angstrohm MARKING (per MIL-PRF-55182) Characteristics: C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, B = 0.1 % Value: Three significant figures and multipliers J = JAN (Joint Army - Navy) brand RNR/RNN55, RNR/RNN57: (4 lines) RNR/RNN60, RNR/RNN65, RNR/RNN70, RNR/RNN75: (5 lines) A Manufacturer’s code 17745 CAGE code 205C 3 digit date code and characteristic 1205J 4 digit date code and JAN 1002 Value RNR60E Style and characteristic FSRJ Tolerance, failure rate, lead material and JAN 2501FS Value, tolerance and failure rate 1203A Production lot code COMPARISON OF VISHAY ANGSTROHM CHARACTERISTICS TO MIL SPECIFICATION LIMIT (1) LOAD LIFE LIMIT ± 2.0 % MOISTURE LIMIT (2) ± 0.2 % SHOCK LIMIT ± 0.2 % VIBRATION LIMIT ± 0.2 % HIGH TEMPERATURE EXPOSURE LIMIT ± 2.0 % LOW TEMPERATURE OPERATION LIMIT ± 0.15 % RESISTANCE TO SOLDERING HEAT LIMIT ± 0.1 % 55 < 0.2 % < 0.03 % < 0.02 % < 0.02 % < 0.4 % < 0.004 % < 0.02 % 57 < 0.3 % < 0.02 % < 0.01 % < 0.01 % < 0.3 % < 0.005 % < 0.01 % 60 < 0.3 % < 0.03 % < 0.01 % < 0.01 % < 0.4 % < 0.004 % < 0.02 % 65 < 0.5 % < 0.03 % < 0.01 % < 0.01 % < 0.4 % < 0.003 % < 0.01 % 70 < 0.6 % < 0.01 % < 0.01 % < 0.01 % < 0.4 % < 0.006 % < 0.01 % 75 < 0.5 % < 0.02 % < 0.01 % < 0.01 % < 0.3 % < 0.010 % < 0.01 % MILITARY STYLE (RNR/RNN) Notes (1) This typical data is taken from the average resistance shifts from numerous values. The actual shifts are dependent on the value. (2) Any shift during moisture testing is due to the “load” (mini-load life) portion of the test and not due to the effect of moisture DIMENSIONS PER MIL-PRF-55182 in inches (millimeters) E C A D (3) B VISHAY ANGSTROHM MODEL MILPRF55182 STYLE A LENGTH B DIAMETER C CL TO CL (MAX.) D LENGTH ± 0.125 (± 3.18) E DIAMETER ± 0.002 (± 0.051) APPROX. WEIGHT (g) HDN55 RNR55, RNN55 0.250 + 0.031 - 0.046 (6.35 + 0.78 - 1.17) 0.109 ± 0.031 (2.77 ± 0.78) 0.379 (9.63) 1.50 (38.10) 0.025 (0.635) 0.337 HDN57 RNR57, RNN57 0.281 ± 0.062 (7.14 ± 1.57) 0.155 ± 0.015 (3.94 ± 0.38) 0.467 (11.86) 1.25 (31.75) 0.025 (0.635) 0.405 HDN60 RNR60, RNN60 0.375 + 0.062 - 0.115 (9.53 + 1.57 - 2.92) 0.125 ± 0.040 (3.18 ± 1.02) 0.561 (14.25) 1.50 (38.10) 0.025 (0.635) 0.450 HDN65 RNR65, RNN65 0.625 + 0.031 - 0.094 (15.8 + 0.787 - 2.39) 0.188 + 0.062 - 0.031 (4.78 + 1.57 - 0.787) 0.780 (19.81) 1.50 (38.10) 0.025 (0.635) 1.30 HDN70 RNR70, RNN70 0.750 + 0.125 - 0.250 (19.05 + 3.18 - 6.35) 0.250 + 0.078 - 0.090 (6.35 + 1.98 - 2.29) 0.939 (23.85) 1.50 (38.10) 0.032 (0.813) 1.44 HDN75 RNR75, RNN75 1.062 ± 0.062 (26.98 ± 1.58) 0.375 + 0.062 - 0.150 (9.53 + 1.57 - 3.81) 1.186 (30.12) 1.50 (38.10) 0.032 (0.813) 2.500 Note Lead length for product in foil bag pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. (3) Revision: 15-Nov-12 Document Number: 66001 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000