ERC (Military RNC/RNR) www.vishay.com Vishay Dale Metal Film Resistors, Military/Established Reliability, MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics J, H, K FEATURES • • • • • • • • • • • • Meets requirements of MIL-PRF-55182 Very low noise (- 40 dB) Verified failure rate (contact factory for current level) 100 % stabilization and screening tests. Group A testing, if desired, to customer requirements Controlled temperature coefficient Epoxy coating provides superior moisture protection Standard lead on RNC product is solderable and weldable Traceability of materials and processing Monthly acceptance testing Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements Extensive stocking program at distributors and factory on RNC50, RNC55, RNC60 and RNC65 For MIL-PRF-55182 characteristics E and C product, see Vishay Angstrohm’s HDN (Military RNR/RNN) datasheet (www.vishay.com/doc?66001) STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL POWER POWER MIL MIL-PRF-55182 RATING RATING TOLERANCE SPEC. STYLE P70 °C P125 °C ±% SHEET W W ERC50, ERC50..31 (3) RNC50, RNR50 07 0.10 0.05 ERC55, ERC55..65 (3) RNC55, RNR55 01 0.125 ERC55..200, ERC55..201 (3) RNC60, RNR60 03 0.25 MAXIMUM WORKING VOLTAGE (2) V RESISTANCE RANGE TEMPERATURE COEFFICIENT ± ppm/°C LIFE FAILURE RATE (1) 0.1, 0.5, 1 200 10 to 796K 100 (K), 50 (H), 25 (J) M, P, R, S 0.10 0.1, 0.5, 1 200 10 to 2M 100 (K), 50 (H), 25 (J) M, P, R, S 0.125 0.1, 0.5, 1 250 10 to 2M 100 (K), 50 (H), 25 (J) M, P, R, S (4) 2.01M to 3.01M 100 (K), 50 (H), 25 (J) M ERC65, ERC65..65 (3) RNC65, RNR65 05 0.50 0.25 0.1, 0.5, 1 300 10 to 3.01M 100 (K), 50 (H), 25 (J) M, P, R ERC70 ERC70..4 (3) RNC70, RNR70 06 0.75 0.50 0.1, 0.5, 1 350 10 to 3.01M 100 (K), 50 (H), 25 (J) M, P, R Notes (1) Consult factory for current QPL failure rates. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) Hot solder dipped leads. (4) Tolerance of ± 0.1 % is not applicable to characteristics K. TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient, max. Dielectric Strength UNIT CONDITION ppm/V 5/V when measured between 10 % and full rated voltage VAC RNC50, RNC55 and RNC60 = 450; RNC65 and RNC70 = 900 Insulations Resistance 1011 dry; 109 after moisture test Operating Temperature Range °C - 65 to + 175 Terminal Strength lb 2 lb pull test on RNC50, RNC55, RNC60 and RNC65; 4.5 lb pull test on RNC70 Solderability Weight Revision: 21-Sep-12 Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 g RNC50 = 0.11; RNC55 = 0.35; RNC60 = 0.35; RNC65 = 0.84; RNC70 = 1.60 1 Document Number: 31025 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ERC (Military RNC/RNR) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format) R N C 5 MIL STYLE CHARACTERISTICS RNC = Solderable/ weldable RNR = Solderable only (see Standard Electrical Specifications table) J = ± 25 ppm H = ± 50 ppm K = ± 100 ppm 5 H 2 1 5 2 F R RESISTANCE TOLERANCE FAILURE VALUE CODE RATE 3 digit significant B = ± 0.1 % M = 1.0 %/1000 h D = ± 0.5 % figure, followed P = 0.1 %/1000 h by a multiplier F=±1% R = 0.01 %/1000 h Use “R” for S = 0.001 %/1000 h values < 100 Ω 10R0 = 10 Ω 2152 = 21.5 k Ω 3014 = 3.01 MΩ Historical Part Number example: RNC55H2152FR R36 (will continue to be accepted) R 3 6 PACKAGING SPECIAL Blank = Standard B14 = Tin/lead, bulk BSL = Tin/lead, bulk, (Dash number) single lot date code (Up to 3 digits) R36 = Tin/lead, From 1 to 999 T/R (full; 50, 55, 60) as applicable R64 = Tin/lead, 4 = Hot solder dip (70’s) T/R (full; 65, 70) 31 = Hot solder dip (50’s) RE6 = Tin/lead, 65 = Hot solder dip T/R (1000 pieces) (55’s, 65’s) RSL = Tin/lead, T/R, single lot date code 201 = Hot solder dip (60’s) RNC55 H 2152 F R R36 MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) E (1) A C (Max.) D B Note (1) Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape spacing and lead trim. VISHAY DALE MODEL ERC50 ERC55 ERC55..200 ERC65 ERC70 MIL-PRF-55182 STYLE RNC50, RNR50 RNC55, RNR55 RNC60, RNR60 RNC65, RNR65 RNC70, RNR70 A B 0.150 ± 0.020 (3.81 ± 0.51) 0.250 + 0.031 - 0.046 (6.35 + 0.79 - 1.17) 0.280 ± 0.020 (7.11 ± 0.51) 0.562 ± 0.031 (14.27 ± 0.79) 0.562 ± 0.031 (14.27 ± 0.79) 0.070 ± 0.010 (1.78 ± 0.25) 0.094 ± 0.012 (2.39 ± 0.30) 0.097 ± 0.012 (2.46 ± 0.30) 0.180 ± 0.015 (4.57 ± 0.38) 0.180 ± 0.015 (4.57 ± 0.38) C (MAX.) 0.187 (4.75) 0.300 (7.62) 0.350 (8.89) 0.687 (17.45) 0.687 (17.45) D E 0.016 ± 0.002 (0.41 ± 0.05) 0.025 ± 0.002 (0.64 ± 0.05) 0.025 ± 0.002 (0.64 ± 0.05) 0.025 ± 0.002 (0.64 ± 0.05) 0.032 ± 0.002 (0.81 ± 0.05) 1.25 ± 0.266 (31.75 ± 6.76) 1.50 ± 0.125 (38.1 ± 3.18) 1.50 ± 0.125 (38.1 ± 3.18) 1.50 ± 0.125 (38.1 ± 3.18) 1.50 ± 0.125 (38.1 ± 3.18) APPLICABLE MIL-SPECIFICATIONS MATERIAL SPECIFICATIONS Element Vacuum-deposited nickel-chrome alloy Core Fire-cleaned high purity ceramic Encapsulation Specially formulated epoxy compound Termination Standard lead material is solder-coated copper solderable and weldable per MIL-STD-1276, type C MIL-PRF-55182: The ERC series meets the electrical, environmental and dimensional requirements of MIL-PRF-55182. MIL-R-10509: MIL-PRF-55182 supercedes MIL-R-10509 on new designs. The ERC series meets or exceeds MIL-R-10509 requirements. DOCUMENTATION: Qualification and failure rate verification test data is maintained by Vishay Dale and is available upon request. Lot traceability and identification data is maintained by Vishay Dale for five years. POWER RATING Power ratings are based on the following two conditions: 1. ± 2.0 % maximum DR in 10 000 h load life 2. + 175 °C maximum operating temperature CAGE CODE: 91637 Revision: 21-Sep-12 2 Document Number: 31025 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ERC (Military RNC/RNR) www.vishay.com Vishay Dale 120 RATED POWER IN % HEAT RISE (°C ABOVE AMBIENT) Vishay Dale ERC resistors have an operating temperature range of - 65 °C to + 175 °C. They must be derated according to the following curve: ERC50 ERC55, ERC55-200 100 80 ERC65, ERC70 60 120 100 80 60 40 40 20 20 0 - 65 - 50 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W - 25 0 25 50 DERATING 75 100 150 175 200 125 AMBIENT TEMPERATURE IN °C MARKING (per MIL-PRF-55182) Characteristics: K = 100 ppm, H = 50 ppm, J = 25 ppm Tolerance: F = 1 %, D = 0.5 %, B = 0.1 % Value = Three significant figures and multiplier J = JAN (Joint Army - Navy) brand RNC/RNR50, 55 (4 lines) D 210H 1003 FSCJ RNC/RNR60, 65, 70 (5 lines) 91637 1213J RNC60J 1211FS 1209A Manufacturer’s code 3 digit date code and characteristic Value Tolerance, failure rate, lead material and JAN Revision: 21-Sep-12 CAGE code 4 digit date code and JAN Style and characteristic Value, tolerance, and failure rate Production lot code 3 Document Number: 31025 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000