ELECTRICAL SOLUTIONS A. System Overview Pan-Way Low Voltage Surface Mount Outlet Boxes ® • JBX3510 assembles without the use of screws for faster installation • JBX3510, JB1, and JB1D are supplied with adhesive backing to speed installation Part Number JBX3510IW-A JBX3510**-A JB1D**-A JB1**-A JBP2 Std. Std. Pkg. Ctn. Color‡ Qty. Qty. Off 1 10 White Single gang one-piece outlet box with adhesive backing. Box accepts Pan-Way ® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way ® LD profile raceway. 5.09"L x 3.34"W x 1.75"H (129.4mm x 85.0mm x 44.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Off White 1 10 JB1DIW-A Single gang one-piece deep outlet box with adhesive backing. Box accepts Pan-Way ® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way ® LD profile raceway. 5.23"L x 3.48"W x 2.75"H (133.0mm x 88.5mm x 69.8mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Off White 1 10 Double gang two-piece screw together outlet box. Box accepts Pan-Way ® Screw-On Faceplates or any NEMA standard double gang faceplates. For use with Pan-Way ® LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakouts for 1/2" or 3/4" diameter conduit. Off White 1 Double gang two-piece screw together deep outlet box. Box accepts Pan-Way ® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way ® T-45 or LD profile raceway. 5.19"L x 5.19"W x 2.75"H (131.9mm x 131.9mm x 69.8mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Off White 1 Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10 lbs. (5 lbs. per CSA). For use with Pan-Way ® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit. Off White JBA-X In-wall box adapter. Adapts single gang surface mount outlet boxes to in-wall conduit boxes. — 10 100 JB1FSIW-A Single gang two-piece snap together outlet box with adhesive backing. Box accepts Pan-Way ® Snap-On Faceplates. For use with Pan-Way ® T-45 or LD profile raceway. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. Off White 1 10 RJBX3510 JBP2DIW JBA-X Part Description Single gang two-piece snap together outlet box with adhesive backing. Box accepts Pan-Way ® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way ® T45 or LD profile raceway. 5.00"L x 3.26"W x 1.62"H (127.1mm x 82.7mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit. B1. Cable Ties JB1IW-A JBP2IW JBP2D • JB1 and JB1D are a one-piece design requiring no assembly JB1FS**-A RJBX3510IW B2. Cable Accessories B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection 10 C4. Cable Management 1 10 5 D1. Terminals D2. Power Connectors D3. Grounding Connectors E1. Labeling Systems E2. Labels ‡For other colors replace IW (Off White) with EI (Electric Ivory), IG (International Gray), or WH (White). E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)