Pan-Way ® Hinged LDPH Raceway SPECIFICATION SHEET Pan-Way® LDPH Raceway specifications LDPH non-metallic series is a power rated, single channel, pre-assembled two-piece hinged cover design surface raceway. It shall be suitable for use in applications up to 600 volts, shall include adhesive backing and shall be made of impact resistant material with a smooth finish that shall not scratch, peel or corrode. The raceway shall include an assortment of bend radius and standard fittings that complement the offering to help route, protect and conceal power or low voltage cabling. LDPH raceway shall be available in three sizes and four standard colors that shall be optimized for use with the Panduit ® Pan-Net ® communication system. technical information Material: Rigid PVC Flammability: UL94V-0; FT4 Voltage Rating: UL5A/CSA C22.2 No. 62.1-03 600V Approvals: c-UL-us UL Listed 95425 (raceway); UL Listed E116129 (fittings) NEC: Article 388 Color: Off White (IW), Electrical Ivory (EI), International Gray (IG), White (WH) Capacity Single-channel Operating and Storage Temperature 0 to 50° C BRC Fittings: Minimum 1" (25.4mm) bend radius key features and benefits Pre-assembled two-piece hinged cover design: Cover remains open without use of tools or fixtures; speeds placement of cables into the raceway. Non-slip liner cover: Keeps cover from sliding when in an open position. Particularly useful when product is used in vertical applications. 1" bend radius fittings: Fittings designed to maintain TIA/EIA bend radius requirements are available. Highly tamper resistant: Difficult for untrained personnel to access the raceway. Provides maximum security for communication cabling and maximum safety for power cabling. Adhesive backing: Full length adhesive strip allows easy tool free installation and works well for temporary mounting. Mounting holes in base: Eliminates need for drilling holes in raceway and speeds installation Available in different sizes, lengths and colors: Available sizes – LDPH3, LDPH5, LDPH10; Available lengths – 6’,8’,10’. Raceway is field paintable to match walls and surrounding décor. Non-metallic construction: Lightweight, solid color throughout, high impact resistance, and easy to cut with standard cutting tools. applications Pan-Way ® LDPH Surface Raceway is designed to provide an easy and economical solution for routing any power or low voltage cable along perimeter walls, baseboards or w w w . pa n d u it.c o m ceilings. This raceway is the perfect solution for schools, hospitals, offices, homes or anywhere a small, secure, low profile raceway is needed. Raceway LDPH3IW**-A LDPH5IW**-A LDPH10IW**-A LDPH Fittings Outside corner: OCFX*IW-X Inside corner: ICFX*IW-X Right angle: RAFX*IW-X Tee: TFX*IW-X Four-way cross:CRFX5IW-X End cap:ECFX*IW-X Drop ceiling/ entrance end:DCEFXIW-X Right angle/ entrance end:RAEFXIW-X LDPH5 TO LDPH3 reducer:RFX53IW-X LDPH10 TO LDPH5 reducer:RFX105IW-X LDPH10 TO LDPH3 reducer: RFX103IW-X Coupler:CFX*IW-X Surface Mount Outlet and Junction Boxes Single gang, two-piece: JBP1IW Single gang, two-piece, deep: JBP1DIW Single gang, two-piece, extension: JBP1EIW Single gang, two-piece, intermediate: JBP1IIW Single gang, two-piece, snap on: JBP1FSIW Single gang, two-piece, round: RJBX3510IW Double gang, two-piece: JBP2IW Double gang, two-piece, deep: JBP2DIW Double gang, two-piece, divided: JBP2SIW Double gang, two-piece, snap on: JBP2FSIW *Insert raceway size 3, 5 or 10. **Insert raceway length of 6’, 8’ or 10’ All parts listed in Off White (IW) color. To order other colors substitute Electrical Ivory (EI). International Gray (IG), and White (WH). All products shown are power rated up to 600V. Pan-Way ® Hinged LDPH Raceway Wire Fill Electrical Cables 14 AWG Raceway Type and Configuration Fill Area (in²) 12 AWG Data Grade Cable 10 AWG 24 AWG 24 AWG 24 AWG 24 AWG Coax Cable 24 AWG 24 AWG 24 AWG RG6 THHN/THWN/T90 0.111 0.130 0.164 Max. Max. UL Temp Rise Test RG59/u 2 Strand Category 5e – Plenum Category 5e – Riser Category 6 Category 6A Category 6A Category 6A Category 6A (SD) Dia. = 0.193 Dia. = 0.225 Dia. = 0.240 Dia. = 0.289 Dia. = 0.300 Dia. = 0.330 Dia. = 0.240 Dia. = 0.275 Dia. = 0.242 Fill Fill Fill Fill Fill Fill Fill Fill Fill Fill Max. Fiber Optic Cable Dia. = 0.175 Fill Spec. Max. Spec. Max. Spec. Max. Spec. Max. Spec. Max. Spec. Max. Spec. Max. Spec. Max. Spec. Max. Spec. Max. 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 40% 60% 4 LDPH3 0.17 9 7 4 2 3 1 2 1 2 1 1 0 1 0 1 1 2 1 1 1 2 2 LDPH5 0.33 14 12 8 4 6 3 4 2 4 2 3 1 2 1 2 2 4 2 3 2 4 5 8 LDPH10 0.89 18 18 16 12 18 8 13 7 11 5 8 5 7 4 6 7 11 5 8 7 11 14 22 LDPH Lineart LDPH3 Internal Area = .17 Sq. In. LDPH5 Internal Area = .33 Sq. In. LDPH10 Internal Area = .89 Sq. In. Fittings OCFX ICFX RAFX TFX RFX CRFX5 ECFX DCEFX RAEFX CFX w w w . pa n d u it.c o m Pan-Way ® Hinged LDPH Raceway Compatible LDPH Raceway Surface Mount Outlet/Junction Boxes Power, Low Voltage or Fiber Optic RJBX3510** Single gang two-piece screw together round outlet box. JBP1** Single gang two-piece screw together outlet box. JBP1D** Single gang two-piece screw together deep outlet box. JBP1E** Single gang two-piece screw together extension outlet box. JBP1I** Single gang two-piece screw together intermediate outlet box. JBP2** Double gang two-piece screw together deep outlet box JBP2S** Double gang two-piece screw together divided outlet box JBP2D** Double gang two-piece screw together deep outlet box JBP2FS** Fast-Snap™ Double Gang Power Rated Two-Piece Snap Together Outlet Box PSJBX** Single gang two-piece snap together power source box. JBP1MR20** Single gang two-piece power rated low profile snap together outlet box. Includes 20A U.S. style rectangular elec. outlet. JBP1MD20** Single gang two-piece power rated low profile snap together outlet box. Includes 20A U.S. style 106 duplex elec. outlet. ** = Available colors: International White (IW), Electrical Ivory (EI), International Gray (IG), White (WH) or Arctic White (AW). Surface Mount Outlet/Junction Boxes JBP1MD20 JBP1MR20 RJBX3510 JBP1 JBP1D JBP1E JBP1I JBP2 JBP2S JBP2D JBP2FS PSJBX WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. SRSP30--WW-ENG Replaces SA-SRSP15 6/2015