Pan-Way ® LD Surface Raceway System SPECIFICATION SHEET LD Raceway specifications LD non-metallic series low voltage, one-piece hinged design, single channel surface raceway shall include adhesive backing and shall be made of impact resistant material with a smooth finish that shall not scratch, peel or corrode. The raceway shall include an assortment of bend radius and standard fittings that complement the offering to help route, protect and conceal low voltage data, voice and video cabling. LD raceway shall be available in three sizes and four standard colors that shall be optimized with the Panduit ® Pan-Net ® communication system. technical information Material: Rigid PVC Flammability: UL94V-0; FT4 Capacity: Single Channel Voltage Rating: 50V or less Operating and Storage Temperature: 0 to 50o C key features and benefits 1" bend radius control fittings: Cables in the raceway will satisfy the minimum 1” bend radius requirement, preventing the potential degradation of cable performance; meets TIA/EIA standards One-piece hinged design: Cables can be laid into the raceway, speeding installation and preventing damage to cables Adhesive backing: Full length adhesive strip allows easy tool free installation and works well for temporary mounting Available in different sizes & lengths: Accommodates varying cable types and capacities. Available sizes - LD3, LD5,LD10 ; Available lengths - 6’,8’,10’ (2m length available in Europe only) Non-metallic construction: Lightweight, reducing installer fatigue and labor required to install the raceway; solid color throughout will not chip, peel, rust or corrode; easy to cut with standard saws and saw blades, eliminating the need for special cutting devices Distinct colors: Available in four standard colors- IW,EI,IG,WH. AW available in Europe only. Raceway is field paintable to match walls and surrounding décor Full selection of fittings and surface mount boxes: Wide variety of fittings and surface mount boxes available for various LD raceway applications applications Pan-Way ® LD Surface Raceways are designed to provide easy and economical solutions for routing any low voltage cable along smooth and clean perimeter walls, w w w . pa n d u it.c o m baseboards or ceilings. This raceway is a perfect solution for schools, hospitals, offices, homes or anywhere a small, secure, low profile raceway is needed. Raceway:LD3IW**-A LD5IW**-A LD10IW**-A LD Raceway Fittings Coupler: CF*IW-E Inside corner: ICFC*IW-X Outside corner:OCFC*IW-X Right angle: RAFC*IW-X End cap: ECF*IW-X Tee: TFC*IW-X Four-way cross: CRFC5IW-X Drop ceiling/ entrance end: DCF*IW-X Right angle/ entrance end: RAEFXIW-X LD5 to LD3 reducer: RF5X3IW-E LD10 to LD5 reducer: RF10X5IW-X LD10 to LD3 reducer: RF10X3IW-X LD5 fire box adapter: FBA5IW-X LD10 fire box adapter: FBA10IW-X LD Raceway Installation Installation tool: LDW*-V LD Raceway Surface Mount Outlet/Junction Boxes Low Voltage: Single gang, one–piece :JB1IW-A Single gang, one-piece, deep: JB1DIW-A Single gang, two-piece : JBX3510IW-A Single gang, two-piece, fast snap: JB1FSIW-A In-wall box adapter: JBA-X Power rated: Single gang, two-piece: JBP1IW Single gang, two-piece, deep: JBP1DIW Single gang, two-piece, extension: JBP1EIW Single gang, two-piece, intermediate: JBP1IIW Single gang, two-piece, snap on: JBP1FSIW Single gang, two-piece, round: RJBX3510IW Double gang, two-piece: JBP2IW Double gang, two-piece, deep: JBP2DIW Double gang, two-piece, divided: JBP2SIW Double gang, two-piece, snap on: JBP2FSIW * Insert raceway size of 3, 5, or 10 ** Insert raceway length of 6’, 8’, or 10’ All parts listed in International White (IW) color. To order other colors substitute Electrical Ivory (EI), International Gray (IG), and White (WH). Pan-Way ® LD Surface Raceway System Wire Fill Fill Raceway Type Area and Configuration (in2) LD3 LD5 LD10 0.21 0.38 1.00 Electrical Cables 14 12 10 Data Grade Cables AWG AWG AWG 24 AWG/UTP CM THHN/T90 Cat 5e – Plenum Cat. 6 Cat. 6A 0.111 0.130 0.164 DIA. = 0.193 DIA. = 0.24 DIA. = 0.30 FILL FILL FILL FILL MAX MAX MAX SPEC MAX SPEC MAX SPEC MAX (UL Temp Rise Test) 40% 60% 40% 60% 40% 60% ** ** ** 2 4 1 2 1 1 ** ** ** 5 7 3 5 2 3 ** ** ** 13 20 8 13 5 8 Cat. 6A (SD) DIA. = 0.24 FILL SPEC MAX 40% 60% 1 2 3 5 8 13 Audio/Video FIber Optic Cable RG6 DIA. = 0.275 FILL SPEC MAX 40% 60% 1 2 2 3 6 10 2 Strand DIA. = 0.175 FILL SPEC MAX 40% 60% 3 5 6 9 16 24 LD Raceway 0.94 [23.9] 0.58 [14.8] 0.46 [11.7] 0.50 [12.7] 0.77 [19.6] 0.70 [17.8] 1.01 [25.8] 1.00 [25.4] LD3 LD5 LD10 0.055 [1.4] 1.51 [38.4] Fittings CF ICFC OCFC RAFC ECF TFC CRFC5 DCF RF FBA LDW RAEFX w w w . pa n d u it.c o m Pan-Way ® LD Surface Raceway System Compatible LD Raceway Surface Mount Outlet/Junction Boxes Low Voltage or Fiber Optic ONLY JB1**-A Single gang one-piece outlet box with adhesive backing. JB1D**-A Single gang one-piece deep outlet box with adhesive backing JB1FS**-A Fast-Snap™ Single Gang Two-Piece Snap Together Outlet Box with adhesive backing. JBX3510**-A Single gang two-piece snap together outlet box with adhesive backing JBA-X In-wall box adapters adapt single gang surface mount outlet boxes to in-wall conduit boxes. Power, Low Voltage or Fiber Optic RJBX3510** Single gang two-piece screw together round outlet box. JBP1** Single gang two-piece screw together outlet box. JBP1D** Single gang two-piece screw together deep outlet box. JBP1E** Single gang two-piece screw together extvension outlet box. JBP1I** Single gang two-piece screw together intermediate outlet box. JBP2** Double gang two-piece screw together deep outlet box JBP2S** Double gang two-piece screw together divided outlet box JBP2D** Double gang two-piece screw together deep outlet box JBP2FS** Fast-Snap™ Double Gang Power Rated Two-Piece Snap Together Outlet Box PSJBX** Single gang two-piece snap together power source box. ** = Available colors: International White (IW), Electrical Ivory (EI), International Gray (IG), White (WH) or Arctic White (AW). Surface Mount Outlet/Junction Boxes JB1 JB1D JB1FS JBX3510 JBA RJBX3510 JBP1 JBP1D JBP1E JBP1I JBP2 JBP2S JBP2SD JBP2FS PSJBX WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2015 Panduit Corp. ALL RIGHTS RESERVED. SRSP21--WW-ENG Replaces WW-SRSP10 6/2015