Pan-Way ® Cove Raceway System S P E C I F I C AT I O N S H E E T specifications WCM35 non-metallic multi-channlel capable surface shall be used to route, protect, and conceal data, voice, video, fiber optic, and power cabling. The raceway shall be listed as suitable for use in applications up to 600 volts between conductors by Underwriters Laboratories, Inc. per standard 5A, and by Canadian Standards Association, Inc. per 22.2 no.62.1-03, when screw secured and installed per instructions. A full complement of fittings with a 1" minimum bend radius compliant with TIA/EIA-568-B, must be available. Divider walls must be available to form separate channels in the multi-channel raceway. WCM35 raceway will be manufactured from impact-resistant material with flammability rating of V-0. WCM35 raceway must be tamper resistant yet allow access for moves, adds and changes. WCM35 raceway finish shall be pure color and will resist scratches and dents and will not peel or corrode. WCM35 Raceway shall be available in off-white as a standard color, shall be paintable, and shall be optimized for use with the Panduit ® Pan-Net ® Communication System. technical information Material: Rigid PVC Flammability: UL94V-0; FT4 Voltage rating: UL-5A 600VAC CSA C22.2 No.62-93 300VAC Approvals: UL Listed 95425 (Raceway); UL Listed E116129 (Fittings) NEC: Article 388 Color: Off White CSI spec form: LP-CSISPEC-WCM-1 key features and benefits 1" bend radius control Fittings conform to TIA/EIA bend radius control standards while providing an aesthetic appearance; bend radius control ensures maximum headroom of high performance copper and fiber cable Can be used as trunking raceway Decorative appearance preserves original architectural styling Can be painted with latex paint Blends well with any décor creating a virtually invisible premise raceway routing solution Lightweight Reduces install fatigue; allows for one-person installation Non-metallic construction Solid color throughout will not chip, peel, rust, or corrode; masks scratches High impact resistance Extremely durable for a long life Easy to cut with standard saws and saw blades Reduces installed cost and the need for special cutting devices Designer profile Maintains aesthetically pleasing appearance Synergy with complete line of Pan-Way ® Raceway Cove Raceway may be integrated with other Panduit Raceway Systems applications Pan-Way ® Cove Raceway mounts in the horizontal corner between ceiling and wall and/or the vertical corner between walls and maintains an aesthetically pleasing design that discreetly conceals cabling. Cove Raceway is tamper resistant yet allows w w w. p a n d u it.c o m access for moves, adds and changes and includes a full complement of fittings, accessories and termination options. Cove Raceway is compatible with other Pan-Way Raceway Systems. Cove Raceway: Base: Cover: Divider wall: WCM35BIW8* WCM35CIW8* WCM35DW8^ Cove Raceway Fittings: Cover coupler: Inside corner fitting: Outside corner fitting: Tee fitting: Tee fitting insert: End cap fitting: Transition fitting: Transition fitting LD/LDPH5 raceway: Transition fitting LD/LDPH10 raceway: Transition fitting T70 raceway: Device box and faceplate adapter: Backfeed fitting: Wire retainer: WCM35CCIW-X WCM35ICIW WCM35OCIW WCM35TIW WCM35TI^ WCM35ECIW WCM35TRIW WCM35TR5IW WCM35TR10IW WCM35TR70IW WCM35DBFIW WCM35BFIW WCM35WR-X^ *Supplied in eight foot lengths. IW (Off White) in part number represents color availability. ^ Available in International Gray only. Pan-Way® Cove Raceway System Electrical Cables 14 AWG 12 AWG Data Grade Cables 10 AWG THHN/THWN/T90 0.111 0.130 MAX 0.164 24 AWG 24 AWG 24 AWG Cat. 5e – Plenum Cat. 5e – Riser Cat. 6 and Cat. 6A (SD) Cat. 6A RG6 RG59/u 2 Strand DIA = 0.193 DIA = 0.225 DIA = 0.240 DIA = 0.300 DIA = 0.275 DIA = 0.242 DIA = 0.175 Fill Raceway Type and Configuration Fill Area (in²) MAX WCM35: No Devices 5.40 50 40 WCM35: Using Wire Retainer — No Devices 5.00 50 2.40 WCM35: Power and Data Using Wire Retainer and Divider Wall WCM35: Power and Data Using DBF WCM35: Power and Data Using Low Profile Transition Insert Fill Fill 24 AWG Fill Fill Fill Fill Fill SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) (40%) (60%) 30 73 110 54 81 47 71 30 45 36 54 46 70 89 134 40 30 68 102 50 75 44 66 28 42 33 50 43 65 83 124 — — — 32 49 24 36 21 31 13 20 16 24 20 31 39 59 2.40 30 25 20 — — — — — — — — — — — — — — 160 — — — 21 32 16 24 14 21 9 13 10 16 13 20 26 39 140 25 25 20 — — — — — — — — — — — — — — 180 25 25 20 — — — — — — — — — — — — — — 2.50 — — — 34 51 25 37 22 33 14 21 16 25 21 32 41 62 WCM35BIW8 MAX Fiber Optic Cable Coax Cables (UL Temp Rise Test) WCM35CIW8 WCM35DW8 WCM35CCIW-X WCM35ICIW 3.5" (89mm) WCM35OCIW WCM35TR70IW WCM35TI WCM35TIW WCM35DBFIW WCM35ECIW WCM35BFIW WCM35WR-X A=5.40in 2 (3484mm) 3.5" (89mm) WCM35TRIW WCM35TR5IW WCM35TR10IW Dimensions are in inches. (Dimensions in parenthesis are metric). WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2014 Panduit Corp. ALL RIGHTS RESERVED. SRSP26--WW-ENG Replaces WW-SRSP05 12/2014