SmartZone™ Clamp Meter S p e c i f i c a t i o n S H EET specifications The clamp meter enables the non-invasive, real-time monitoring of single phase current for any device or power strip rated up to 30A by placing the clamp meter directly over a non-armoured power cable with a choice of locking-ring collars to suit international 20A and 30A cable sizes. The clamp meter will be installed as part of a primary/secondary topology, where all critical intelligence and monitoring power supply for the clamp meter is retained within a connected gateway. Data captured from the clamp meter will be used to display baseline operational data through connected gateway firmware or through the SmartZone™ Software Suite platform. The current flow is shown on a local display. technical information Dimensions: Weight: Packaging: Mounting: 5.3 in. x 3.5 in. x 1.6 in. (134mm x 88mm x 40mm) 1.1 lbs. (0.5Kg); 2.2 lbs. (1Kg) packaged 1.1 lbs. (0.5Kg) Zero RU; clips onto cable; free-standing key features and benefits Non-invasive Allows device to be attached directly over single phase operating power cables and begin measuring power without the need to power down monitored device, eliminating operational interruptions, while minimizing time delays and risks that can be associated with downtime. Included adapters accommodate cable diameters between 0.31 in. (8mm) and 0.71 in. (18mm). All cables in the vicinity of a clamp meter should be kept at least 100mm from the clamp meter body, except for the cable being monitored Extended intelligence Layers intelligent monitoring capabilities over non-intelligent devices to quickly and cost-effectively integrate DCIM benefits into legacy installations using patented technology RJ45 connection Utilizes an RJ45 plug to quickly connect SmartZone™ Clamp Meter to a SmartZone™ Gateway port, avoiding complex wiring requirements and time delays Primary/secondary network topology Connects to a SmartZone™ Gateway device that houses the intelligence and monitoring power supply for the SmartZone™ Clamp Meter within the gateway itself to simplify the network architecture and lower overall power consumption Vendor neutral Attaches to the power cable of any powered device to enable monitoring of any new or existing third-party devices, cost-effectively maximizing resources Zero RU form factor Allows clamp meter to be attached in any convenient cable location within a rack or cabinet enclosure, simplifying and accelerating deployment time and reducing the need for valuable rack space SmartZone™ Software suite integration Captures initial power data that is consolidated by connected gateways and then utilized by SmartZone™ Software Suite modules for real-time monitoring and display, management, and automated documentation applications SmartZone™ Power Monitoring Devices capture power consumption data of non-intelligent, vendor neutral equipment within IT and facility domains. SmartZone™ Power Monitoring Devices operate using intelligence and monitoring power supplied by SmartZone™ Gateways, connected via RJ45 ports. The gateways collect data captured from the power monitoring devices for display via gateway firmware or for utilization by SmartZone™ Software platforms. Unique form factors simplify installations, allowing IT and facility teams to quickly and easily retrofit legacy (brownfield) installations with intelligence capabilities in a manner that cost-effectively maximizes current resources. The Panduit® SmartZone™ Clamp Meter captures basic power consumption of non-intelligent devices by attaching the clamp meter casing directly over a live power cable and then easily plugging the clamp meter into an RJ45 gateway port. This rapidly initiates power consumption monitoring and measurement without the service interruption of powering down devices. w w w. pa n d u it.c o m SmartZone™ Clamp Meter c a b l e t y p e s s u p p o r t e d – E M EA Calibration B-Values Value Region Cable Type 52.000 EMEA Titanex 3G6 3 Core 6mm2 54.580 EMEA K-WELL SHIN H07RN-F 3C 6.0mm2 <VDE> 58.358 EMEA Pirelli 3G4 3 Core 4mm2 59.750 EMEA Doncaster Cables England 3 Core 4mm2 60.819 EMEA Titanex 3G4 3 Core 4mm2 60.252 EMEA Lineax 3G4 3 Core 4mm2 61.000 EMEA ESSEX ROYAL 10/3 TYPE SOW 90C (-40C) 600V WATER RESISTANT E42608-B(UL) CSA LL35441-B FT2...P-159-18 MSHA 73.750 EMEA 3x2.5 HO5VV-F TO BS6500 75.933 EMEA IEMMEQU <HAR> HO7RN-F 3G3.5mm2 ARISTONCAVI 2008 95.142 EMEA 3 x 1.5 3 Core 1.5mm2 113.920 EMEA 3G1.5 3 Core 1.5mm2 122.675 EMEA BKS BS6500 HO5VV-F cable types supported – North America Calibration B-Values Value Region Cable Type 53.860 US E56356 60°C 300V 10-3 SJTW FT2 (UL) (-50°C) WATER RESISTANT C (UL) 60°C (140°F) 300V 3X5.26mm (10AWG) 55.200 US (UL) E166124 SJT 3x5.251mm2 (10AWG) 105°C (221°F) 300V VW-1 SWAIN CSA LL105054 TYPE SJT 3x5.251mm2 (10AWG) 105°C (221°F) 300V FT-2 55.710 US (UL) SJT E55333 VW-1 3C/10AWG 300V LONGWELL-P CSA TYPE SJT FT2 56.580 US (UL) SJT 60°C (140°F) E55333 VW-1 3x5.26mm (10AWG) 300V LONGWELL-P CSA 152192 TYPE SJT 60°C 3x5.26mm (10AWG) 300V FT2 57.000 US AMERICAN INSULATED WIRE-K 10/3 SE00N(UL) 600V -50C to 105C CSA LL 8825 ST00W(TPE)600V -50°C to 105C FT2 WATER RESISTANT p-7K 136032 MSHA LEAD FREE 57.390 US TF CABLE FLEXTREME 3/C 10AWG (5.3mm )(UL) SOOW E123366 90°C (194°F) SUN and WATER RES 600V CSA SOOW 90°C (194°F) LL103932 FT2 -40°C P-7K-254013 MSHA 026/11 57.800 US (UL) E166124 SJT 3x5.251mm2 (10AWG) 105°C 300V VW-1 SWAIN CSA LL105054 TYPE SJT 3x5.251mm2 (10AWG) 105°C (221°F) 300V FT-2 58.200 US (UL) E166124 SJT 3x5.251mm2 (10AWG) 105°C (221°F) 300V VW-1 SWAIN CSA LL105054 TYPE SJT 3x5.251mm2 (10AWG) 105°C 300V FT-2. Black plug 59.630 US C (UL)US E90155-D SJTW 3x5.26mm (10AWG) 105°C 300V VW-1 WELL SHIN 61.167 US Southwire Viper (S) 3/C 10 AWG (5.26mm2) SOOW (UL) 600V 74 12/ 62.240 US CCI SEOPRENE 105 10AWG (5.26mm) 3/C SJEOOW E54864 (UL) 300V -50°C TO 105°C (-58°F to 221°F) CSA LL39753 SJTOOW (TPE) -50°C TO 105°C (-58°F to 221°F) WATER-RESISTANT 63.900 US (UL) E166124 SJT 3x5.251mm2 (10AWG) 105°C (221°F) 300V VW-1 SWAIN CSA LL105054 TYPE SJT 3x5.251mm2 (10AWG) 105°C 300V FT-2. White plug 64.030 US CCI 10AWG (5.26mm ) 3/C ST E54864 (UL) 60°C (140°F) 600V – CSA LL39753 ST 60°C (140°F) 600V FT1 67.160 US CAROL 10/3 90C (UL) WATER RESISTANT SOOW CSA (-40) FT-2 P-7K-123033 MSHA MADE IN USA 600V 74.000 US Southwire Viper (S) 3/C 12 AWG (3.31mm2) SOOW (UL) 600V 88.150 US HELUKABEL <VDE><HAR> CE E192384 (UL) SJT 3x12 AWG 60C 300V FT2 LL113926 CSA SJT 60C FT2 102.000 US Southwire Viper (S) 3/C 14 AWG (3.58mm2) SOOW (UL) 600V 109.370 US Southwire Viper (S) 3/C 12 AWG (3.31mm2) SJOOW (UL) 300V 113.330 US (UL) SJT E159216 VW-1 3X14AWG BAOHING CSA SJJ LL112007-1 3X14AWG LF 2 SmartZone™ Clamp Meter cable types supported – Japan Calibration B-Values Value Region Cable Type 56.9 JAPAN 13245006 (VCT 5.5mm2 <PS> E FUJI E.W.C 2011) 60.4 JAPAN 5.5mm VCT <PS>E JCT TEIKOKU 2014 LFV [VCT 3x5.5 (WBG/Y)] 64.5 JAPAN <PS>E MITSUBOSHI VCT 5.5mm 200 [VCT 3x5.5 (WBG)] 68.700 JAPAN <PS> E JET HOKUETSU.D 2012 V7 92.500 JAPAN <PS>E <> KAWAI VCT 2012 DAN-SOFT 3.5mm2 LFV-R 92.1 JAPAN 13245005 (VCT 3.5mm2 <PS> E FUJI E.W.C 2012) 102.2 JAPAN <PS>E MITSUBOSHI VCT 3.5mm 2013 P [VCT 3.5x3 (WBG)] 119.100 JAPAN T<PS>E JET YUKITA S.BAOXING.D.D.Z S-VCT 2.0mm2 2013 LF 144.7 JAPAN <PS> E JET HOKUETSU.D 2013 2.0mm² 146.5 JAPAN <PS>E JET YUKITA 300V 2013 LFV [VCTF (KZ-VCTFS-2M)] 147.3 JAPAN 13245007 (VCT 2mm2 <PS> E FUJI E.W.C 2012 -F-) Not supported JAPAN <PS>E JET YUKITA VCT 2013 LFV) SVCT-IV part numbers Clamp Meter ZACLAMP-01 Cable Wire Clamp Meter Included in SmartZone™ Rack Energy Kits RMSC2T2PCLA01 (2) Clamp Meter (non-invasive), (1) Gateway, (2) Temperature Sensors, and Rack Monitoring Software SmartZone™ Gateway Devices ZARKMS-01-NA SmartZone™ Gateway EP042 with IEC – NEMA 5-15 power cable ZARKMS-01-UNI SmartZone™ Gateway EP042 with IEC – IEC power cable ZARKMS-01-99 SmartZone™ Gateway EP042 (no power cable) ZAHI3-01-NA SmartZone™ Gateway EPA064 with IEC – NEMA 5-15 power cable ZAHI3-01-UNI SmartZone™ Gateway EPA064 with IEC – IEC power cable ZAHI3-01-99 SmartZone™ Gateway EPA064 (no power cable) ZAEI-01-NA SmartZone™ Gateway EPA126 with IEC – NEMA 5-15 power cable ZAEI-01-UNI SmartZone™ Gateway EPA126 with IEC – IEC power cable ZAEI-01-99 SmartZone™ Gateway EPA126 (no power cable) ZAEIPEXP01NA SmartZone™ Gateway Expansion Unit EPAX18 with IEC – NEMA 5-15 power cable ZAEIPEXP01UNI SmartZone™ Gateway Expansion Unit EPAX18 with IEC power leads ZAEIPEXP-01-99 SmartZone™ Gateway Expansion Unit EPAX18 (no power cable) 3 SmartZone™ Clamp Meter clamp meter 134 5.3 [134] 88 3.5 [88] 40 1.6 [40] Dimensions are in inches. [Dimensions in brackets are metric]. WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario [email protected] Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK [email protected] Phone: 44.20.8601.7200 PANDUIT SINGAPORE PTE. LTD. Republic of Singapore [email protected] Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan [email protected] Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico [email protected] Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia [email protected] Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2014 Panduit Corp. All rights reserved. PVSP96--WW-ENG 8/2014