REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-LL-41 P0 D0 B0 W F E t D1 P1 A0 K0 B C A T Fig.: Configuration of LL-41 TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole SYMBOL A0 B0 K0 D0 Reel outside diameter A 7 inch 13 inch Reel inner diameter B 7 inch 13 inch C E F SPECIFICATIONS (mm) 3.1 Max. 5.4 Max. 3.1 Max. 1.5+0.1/0 SPECIFICATIONS (inch) 0.122 Max. 0.213 Max. 0.122 Max. 0.059+0.004/0 178 7.009 330 60 12.994 2.363 100 3.938 20.2 Min. 1.75 0.10 5.5 0.10 4.0 0.10 4.0 0.10 0.32 Max. 0.795 Min. 0.069 0.004 0.217 0.004 0.158 0.004 0.158 0.004 0.013 Max. 12.0 0.10 0.473 0.004 Feed hole diameter Strocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Overall tape thickness Tape width P1 P0 t W Reel width T 18.4 0.725 Max. Punch hole diameter D1 1.0 0.10 0.039 0.004 Note : Device are packed in accordance with EIA standard RS-481-A and specification given above. Available only for LL-41 devices. Visit http:// www.rectron.com for complete datasheets E18