REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-LL-34 P0 t B0 W F E D0 D1 P1 A0 K0 B C A T Fig.: Configuration of LL-34 TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole D0 Reel outside diameter A 7 inch 13 inch Reel inner diameter B 7 inch 13 inch C E F SPECIFICATIONS (mm) 1.8 Max. 3.83 Max. 1.78 Max. 1.5 0.10 SPECIFICATIONS (inch) 0.071 Max. 0.151 Max. 0.070 Max. 0.059 0.004 178 7.009 330 55 12.994 2.166 100 3.938 20.2 Min. 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.10 0.28 Max. 0.795 Min. 0.069 0.004 0.138 0.002 0.158 0.004 0.158 0.004 0.011 Max. 8.0 0.30 0.315 0.012 Feed hole diameter Strocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Overall tape thickness Tape width P1 P0 t W Reel width T 14.4 0.567 Max. Punch hole diameter D1 1.0 0.25 0.039 0.010 Note : E17 SYMBOL A0 B0 K0 Devices are packed in accordance with EIA standard RS-481-A and specification given above. Available only for LL-34 devices. Visit http:// www.rectron.com for complete datasheets