REEL TAPING SPECIFICATIONS FOR SURFACE MOUNT DEVICES-SOD-323 Fig.: Configuration of SOD-323 TAPING ITEM Carrier width Carrier length Carrier depth Sprocket hole Reel outside diameter Reel inner diameter Feed hole diameter Strocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width SYMBOL A0 B0 K0 D A B C E F P P0 P1 t W SPECIFICATIONS (mm) 1.62 Max. 3.0 Max. 1.45 Max. 1.5 0.1 SPECIFICATIONS (inch) 0.064 Max. 0.118 Max. 0.057 Max. 178 1.0 54 Min. 13.0 0.20 1.75 0.10 3.5 0.05 4.0 0.10 4.0 0.10 2.0 0.05 0.267 Max. 8.0+0.3/-0.1 0.059 0.004 7.009 0.039 2.126 Min. 0.512 0.008 0.069 0.004 0.138 0.002 0.158 0.004 0.158 0.004 0.079 0.002 0.011 Max. 0.315+0.012/-0.004 Reel width T 12.5 Max. 0.492 Max. Punch hole diameter D1 1.25 Max. 0.049 Max. Note : Devices are packed in accordance with EIA standard RS-481-A and specification given above. Available only for SOD-323 devices. Visit http:// www.rectron.com for complete datasheets E12