Plastic Packages for Integrated Circuits Package Outline Drawing L8.3x3A 8 LEAD THIN DUAL FLAT NO-LEAD PLASTIC PACKAGE Rev 5, 5/15 ( 2.30) 3.00 ( 1.95) A B 3.00 ( 8X 0.50) 6 PIN 1 INDEX AREA (4X) (1.50) ( 2.90 ) 0.15 PIN 1 TOP VIEW (6x 0.65) ( 8 X 0.30) TYPICAL RECOMMENDED LAND PATTERN SEE DETAIL "X" 2X 1.950 6X 0.65 PIN #1 INDEX AREA 0.10 C 0.75 ±0.05 C 0.08 C 1 SIDE VIEW 6 1.50 ±0.10 8 8X 0.30 ±0.05 8X 0.30 ± 0.10 2.30 ±0.10 C 4 0.10 M C A B 0 . 2 REF 5 0 . 02 NOM. 0 . 05 MAX. DETAIL "X" BOTTOM VIEW NOTES: 1 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to ASME Y14.5m-1994. 3. Unless otherwise specified, tolerance : Decimal ± 0.05 4. Dimension applies to the metallized terminal and is measured between 0.15mm and 0.20mm from the terminal tip. 5. Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or ends). 6. The configuration of the pin #1 identifier is optional, but must be located within the zone indicated. The pin #1 identifier may be either a mold or mark feature. 7. Compliant to JEDEC MO-229 WEEC-2 except for the foot length.