HP 80 – Polypropylene – 85 x 85 mm (3.35 x 3.35 in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Material IP55 Metric - Inlets 7 x M20 - Sides 1 x M16 - Rear 7 Installed M20 Entry Seals (5 - 16mm) Snap-on Cover Semi - Rigid Polypropylene Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 322-980 HP80 85 mm (3.35 in) 85 mm (3.35 in) 42 mm (1.65 in) 10 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M20 460-525 216-420 2.5mm2 - 5 pole M20 10 100 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 86 mm (3.39 in) 5 mm (0.20 in) 81 mm (3.19 in) 42.5 mm (1.67 in) 65 mm (2.56in) Knockout Detail M16 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 141