HP Series The HP Series are economy junction boxes for lighter duty applications. The HP70, 80 and 90 feature snap on covers, while the HP100, 150 and 190 feature 4 quick release screws. HP Enclosures are supplied with universal entry seals that can be easily cut to create the required wire, cable or conduit adapter opening. These universal entry seals provide protection up to IP55. The preinstalled entry seals in the HP Series can accommodate a wide variety of connection possibilities. Large or small cable, cable glands, entry spouts and even single wires can be used, while still remaining watertight and dust free. With such versatility, these enclosures are extremely economical. 138 • • • • • • • • • • • • • Direct mount Semi rigid polypropylene Dust and splash proof Contact labyrinth seal Temperature range up to 100°C (212°F) IP55 protection Universal entry seals Standard rear knockouts Corrosion and maintenance free Non-flammable Low halogen Drainage possibilities for condensed water by drainage inlets Metric inlets on all sides Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com The preinstalled entry seals in the HP Series can accommodate a wide variety of connection possibilities. Large or small cable, cable glands, entry spouts and even single wires can be used, while still remaining watertight and dust free. With such versatility, these enclosures are extremely economical. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 139 HP 70 – Polypropylene – 75 x 75 mm (2.95 x 2.95 in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Material IP55 Metric - Inlets 6 x M20 - Sides 1 x M16 - Rear 3 Installed M20 Entry Seals (5-16 mm) 2 Spare Entry Seals Snap-on Cover Semi - Rigid Polypropylene Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 320-970 HP70 75 mm (2.95 in) 75 mm (2.95 in) 42 mm (1.65 in) 10 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M20 460-525 216-420 2.5mm2 - 5 pole M20 10 100 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 5 mm (0.20 in) 71 mm (2.80 in) 75.5 mm (2.97 in) 42.5 mm (1.67 in) 54 mm (2.13in) Knockout Detail M16 140 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com HP 80 – Polypropylene – 85 x 85 mm (3.35 x 3.35 in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Material IP55 Metric - Inlets 7 x M20 - Sides 1 x M16 - Rear 7 Installed M20 Entry Seals (5 - 16mm) Snap-on Cover Semi - Rigid Polypropylene Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 322-980 HP80 85 mm (3.35 in) 85 mm (3.35 in) 42 mm (1.65 in) 10 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M20 460-525 216-420 2.5mm2 - 5 pole M20 10 100 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 86 mm (3.39 in) 5 mm (0.20 in) 81 mm (3.19 in) 42.5 mm (1.67 in) 65 mm (2.56in) Knockout Detail M16 M20 M20/25 M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 141 HP 90 – Polypropylene – 90 x 90 mm (3.54 x 3.54 in.) Standard Features • Protection Level: • Technical: • Enclosure Material: • Material IP55 Metric - Inlets 7 x M20 - Sides 1 x M16 - Rear 7 Installed M20 Entry Seals (5 - 16mm) Snap-on Cover Semi - Rigid Polypropylene Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 325-990 HP90 90 mm (3.54 in) 90 mm (3.54 in) 45 mm (1.77 in) 10 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M20 840-004 216-420 4mm2 - 5 pole M20 10 100 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 90.5 mm (3.57 in) 87.5 mm (3.44 in) 5 mm (0.20 in) 44.5 mm (1.76 in) 68.5 mm (2.70in) M16 142 M20 M20/25 Knockout Detail M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com HP 100 – Polypropylene – 113 x 113 mm (4.45 x 4.45 in.) Standard Features • Protection Level: • Technical: IP55 Metric - Inlets 7 x M20/M25 - Sides 4 x M20 - Rear 7 Installed M25 Entry Seals (5 - 21 mm) Quick Close Cover Semi - Rigid Polypropylene • Enclosure Material: • Material Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 326-900 HP100 113 mm (4.45 in) 113 mm (4.45 in) 58 mm (2.28 in) 2 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M25 840-004 216-425 4mm2 - 5 pole M25 10 50 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 65 mm (2.56in) M16 M20 M20/25 112.5 mm (4.43 in) 5 mm (0.20 in) 94 mm (3.70 in) 108.6 mm (4.28 in) 4.5 mm (0.18 in) 57 mm (2.24 in) Knockout Detail M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 143 HP 150 – Polypropylene – 164 x 119 mm (6.46 x 4.69 in.) Standard Features • Protection Level: • Technical: IP55 Metric - Inlets 8 x M25 - Sides 2 x M32/M25 - Sides 4 x M20 - Rear 10 Installed M25 Entry Seals (5 - 21 mm) Quick Close Cover Enclosure Material: Semi - Rigid Polypropylene • • Material Temperature Range: • Gasket Material: • Color: • Accessories: -30˚C to 100˚C (-22˚F to 212˚F) None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 326-950 HP150 164 mm (6.46 in) 119 mm (4.69 in) 77 mm (3.03 in) 1 Ordering Information Cat. No. Type Std. Pk. DIN Rail - TS35 - 106mm Universal Entry Seal - M25 198-106 216-425 TS35/106 M25 1 50 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. Knockout Detail M20 144 M25 M25/32 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com HP 190 – Polypropylene – 199 x 149 mm (7.83 x 5.87 in.) Standard Features • Protection Level: • Technical: IP55 Metric - Inlets 8 x M32 - Sides 2 x M40/M32 - Sides 4 x M25 - Rear 10 Installed M32 Entry Seals (13 - 26.5 mm) Quick Close Cover Enclosure Material: Semi - Rigid Polypropylene • • Material Temperature Range: • Gasket Material: • Color: • Accessories: -30˚C to 100˚C (-22˚F to 212˚F) None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 326-990 HP190 199 mm (7.83 in) 149 mm (5.87 in) 70 mm (3.03 in) 1 Ordering Information Cat. No. Type Std. Pk. DIN Rail - TS35 - 144mm Universal Entry Seal - M32 198-144 216-432 TS35/144 M32 1 25 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. Knockout Detail M25 M32 M32/40 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 145