WWW.PHIHONG.COM 15 Watt Universal Switching Adapter PSA15W Single Output Series Features • 0A Minimum Load • Class B EMI Applications • Portable Equipment • Peripherals and Terminals Safety Approvals • • <0.25mA Leakage Current Slim 1” Height • • Low-power Computers Networking • cUL/UL • CE Mechanical Characteristics • Length: 110mm (4.33in) • Width: 65mm (2.56in) Output Specifications • • TUV Meeting Cal. Prop. 65 Model PSA15W-050 PSA15W-090 PSA15W-120 PSA15W-150 PSA15W-180 PSA15W-240 DC Output Voltage +5V +9V +12V +15V +18V +24V • • Load Min. 0A 0A 0A 0A 0A 0A Max. 2.5A 1.5A 1.25A 1A 0.8A 0.625A Height: 25.4mm (1in) Weight: 200g (8oz.) Ripple (1) P-P (max.) 50mV 90mV 120mV 150mV 180mV 240mV Regulation Line & Load ±5% ±5% ±5% ±5% ±5% ±5% (1) Measured by using a 12 inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. Phihong is not responsible for any error and change. Please consult the factory and visit www.phihong.com for the most up-to-date specifications. PSA15W Characteristics INPUT: AC Input Voltage Rating WWW.PHIHONG.COM Over-voltage Protection 100 to 240VAC >130% over-voltage detection, adapter will be shut down AC Input Voltage Range Over-current Protection 90 to 264VAC Output equipped with short circuit protection – auto restart AC Input Frequency 47 to 63Hz Short Circuit Protection Output can be shorted without damage Input Current 0.5A (rms) Max. @ 120VAC 0.25A (rms) Max. @ 240VAC Leakage Current ENVIRONMENTAL: Tempeature Operation Non-operation 0 to +40°C -25 to +75°C 0.25mA Max. Inrush Current (cold) 20A for 120VAC at Max. load 40A for 240VAC at Max. load (Cold start @ ambient 25°C) OUTPUT: Efficiency Humidity Operation 5 to 80% Emissions FCC Class B EN55022 Class B Dielectric Withstand (Hi-pot) Test 70% typical Primary to Secondary: 3000VAC for 1 minute, 10mA Hold-up Time DC Output Connector 12mS Min. @ 120VAC and Max. load Dimension Diagram Unit: mm 2.1x5.5mm Center Positive Standard