HP 100 – Polypropylene – 113 x 113 mm (4.45 x 4.45 in.) Standard Features • Protection Level: • Technical: IP55 Metric - Inlets 7 x M20/M25 - Sides 4 x M20 - Rear 7 Installed M25 Entry Seals (5 - 21 mm) Quick Close Cover Semi - Rigid Polypropylene • Enclosure Material: • Material Temperature Range: -30˚C to 100˚C (-22˚F to 212˚F) • Gasket Material: • Color: • Accessories: None / Contact Labyrinth Seal Light Gray See section below HP Ordering Information Cat. No. Type Length Dimensions mm (in) Width Height Std. Pk. Enclosure 326-900 HP100 113 mm (4.45 in) 113 mm (4.45 in) 58 mm (2.28 in) 2 Ordering Information Cat. No. Type Std. Pk. Terminal Universal Entry Seal - M25 840-004 216-425 4mm2 - 5 pole M25 10 50 Accessories For Liquid Tight Strain Reliefs please refer to catalog pages 150-152. 65 mm (2.56in) M16 M20 M20/25 112.5 mm (4.43 in) 5 mm (0.20 in) 94 mm (3.70 in) 108.6 mm (4.28 in) 4.5 mm (0.18 in) 57 mm (2.24 in) Knockout Detail M25/32 M32/40 M40/50 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 143