SENSITRON _____ SEMICONDUCTOR SL6360FRL TECHNICAL DATA DATA SHEET 5338, REV A THREE PHASE FULL WAVE ULTRAFAST BRIDGE RECTIFIER ASSEMBLY DESCRIPTION: 600 VOLT, 6 AMP, 180 NANOSECOND THREE PHASE BRIDGE RECTIFIER ASSEMBLY. Note: Add ‘S’ at the end for S-100 Screening MAX. RATINGS / ELECTRICAL CHARACTERISTICS RATING Peak Inverse Voltage (PIV) CONDITIONS MIN TYP MAX UNIT - - - 600 Vdc - - 6 Amps o Average DC Output Current (TC = Case Temp) o All ratings are at TA = 25 C unless otherwise specified. TC = 55 C o TC = 100 C (Io) Peak Single Cycle Surge Current (IFSM) tp = 8.3 ms Single Half Cycle Sine Wave, Superimposed On Rated Load Operating and Storage Temp. (Top & Tstg) - Maximum Forward Voltage (Vf) If = 3.0A (300 sec pulse, duty cycle < 2%) 4.5 - - 25 Amps(pk) -55 - +150 C - - 1.3 Volts - - 5.0 Amps Maximum Instantaneous Reverse Current At Rated (PIV) TA = 25 C Reverse Recovery Time (trr) If = 0.5A, Ir = 1.0A, Irr = 0.25A - - 180 nsec Thermal Resistance ( - - - 5 C/W JL) 100 TA = 100 C ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SL6360FRL SENSITRON TECHNICAL DATA DATA SHEET 5338, REV A MECHANICAL DIMENSIONS: In Inches / mm 1.14 (28.96 1.10 27.94) 2-56 UNC 4 Plac es Min 6 Full T hreads 1.01 (25.65 0.99 25.15) .77 (19.56 .73 18.54) – AC AC AC .27 (6.86 .23 5.84) .635 (16.13 .615 15.62) + .100 (2.54)Max .50 (12.7)Min + .043 (1.09 Dia. .037 .940) .20 (5.08 .16 4.06) AC AC AC .18 (4.57 .14 3.56) – FIG. 405A Note: Case finish - Black Anodized DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]