SHD124444 SHD124444P SHD124444N SHD124444D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1159, REV. A HERMETIC POWER SCHOTTKY RECTIFIER 200 C Maximum Operation Temperature DESCRIPTION: A 100 VOLT, 30/45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 100 Volts O IO 30 Amps O IO 45 Amps MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) IFSM 200 Amps MAXIMUM JUNCTION CAPACITANCE CT 1000 pF PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (@ TC=100 C) (Single, Doubler) MAXIMUM DC OUTPUT CURRENT (@ TC=100 C) (Common Cathode, Common Anode) (Vr =5V) MAXIMUM THERMAL RESISTANCE (Single) R JC 1.5 C/W MAXIMUM THERMAL RESISTANCE (Common Cathode, Common Anode, Doubler) R JC 0.39 C/W MAXIMUM OPERATING TEMPERATURE RANGE Top/Tstg -65 to + 200 C MAXIMUM STORAGE TEMPERATURE RANGE Top/Tstg -65 to + 175 C SYMBOL MAX. UNITS Vf 1.01 Volts ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) TJ = 25 C 0.85 TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 100 V PIV) TJ = 25 C TJ = 125 C Ir 0.75 15 ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] mA SHD124444 SHD124444P SHD124444N SHD124444D SENSITRON DATA SHEET 1159, REV. A Mechanical Dimensions: In inches / mm .165 (4.19 Dia. .155 3.94) SINGLE .270 (6.86 .240 6.10) .695 (17.65 .685 17.40) COMMON CATHODE .045 (1.14 .035 0.89) 1 .835 (21.21 .815 20.70) .707 (17.96 .697 17.70) 1.302 (33.07 1.202 30.53) 1 2 2 1 2 COMMON ANODE .550 (13.97 .530 13.46) 3 DOUBLER 3 1 .065 (1.65 .055 1.40) 3 Plac es 3 .200(5.08) BSC 2 Plac es PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DUAL RECTIFIER, DOUBLER (D) .140(3.56) BSC 2 3 1 2 3 TO-258 PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE CATHODE/ ANODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD124444 SHD124444P SHD124444N SHD124444D SENSITRON DATA SHEET 1159, REV. A Curves shown are for bare die only. Typical Forward Characteristics Typical Reverse Characteristics 102 200 °C 101 Instantaneous Reverse Current - I R (mA) 175 °C 200 °C Instantaneous Forward Current - I F (A) 101 175 °C 100 150 °C 100 125 °C -1 10 100 °C 75 °C 10-2 50 °C 10-3 25 °C 10-4 125 °C 0 20 40 60 80 Reverse Voltage - RV (V) 100 120 Typical Junction Capacitance 10-1 -2 10 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop -FV(V) 0.8 Junction Capacitance - C T (pF) 25 °C 900 800 700 600 500 400 300 200 100 0 20 40 60 80 Reverse Voltage - RV (V) 100 120 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]