SHD124422 SHD124422P SHD124422N SHD124422D SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 660, REV. B HERMETIC POWER SCHOTTKY RECTIFIER 175 C Maximum Operation Temperature DESCRIPTION: 45 VOLT, 30/45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. RATING SYMBOL MAX. UNITS PIV 45 Volts O IO 30 Amps O IO 45 Amps IFSM 200 Amps CT 1600 pF 1.5 C/W Top/Tstg -65 to + 175 C SYMBOL MAX. UNITS Vf 0.72 Volts PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) (SINGLE AND DOUBLER) MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) (COMMON CATHODE AND COMMON ANODE) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Half Sine Wave) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) R JC (per leg) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (per leg) If = 20 Amps, TJ = 25 C If = 30 Amps, TJ = 25 C 0.81 If = 20 Amps, TJ = 125 C 0.64 If = 30 Amps, TJ = 125 C 0.74 MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) (per leg) TJ = 25 C Ir TJ = 125 C 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] 0.8 30 mA SHD124422 SHD124422P SHD124422N SHD124422D SENSITRON DATA SHEET 660, REV. B MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 Dia. .155 3.94) SINGLE .270 (6.86 .240 6.10) .695 (17.65 .685 17.40) COMMON CATHODE .045 (1.14 .035 0.89) 1 .835 (21.21 .815 20.70) .707 (17.96 .697 17.70) 1.302 (33.07 1.202 30.53) 1 2 2 3 1 2 COMMON ANODE .550 (13.97 .530 13.46) 3 DOUBLER 3 1 .065 (1.65 .055 1.40) 3 Plac es .200(5.08) BSC 2 Plac es .140(3.56) BSC PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) Note: Curves shown are for un-packaged die. 2 3 1 2 3 TO-258 PIN 1 CATHODE ANODE 1 CATHODE 1 CATHODE Typical Forward Characteristics PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 ANODE Typical Reverse Characteristics 103 102 Instantaneous Reverse Current - I R (mA) 175 °C 125 °C 10 150 °C 125 °C 101 100 °C 0 10 75 °C 10-1 50 °C 25 °C 10-2 10-3 101 0 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop -FV(V) 10 20 30 Reverse Voltage - RV (V) 40 50 Typical Junction Capacitance 25 °C 0.8 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 175 °C 2 1600 1400 1200 1000 800 600 400 200 0 10 20 30 Reverse Voltage - RV (V) 40 50 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SENSITRON DATA SHEET 660, REV. B SHD124422 SHD124422P SHD124422N SHD124422D DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]