Plastic Packages for Integrated Circuits Package Outline Drawing L40.5x5E 40 LEAD QUAD FLAT NO-LEAD PLASTIC PACKAGE Rev 0, 5/11 3.60 36X 0.40 A B 6 PIN #1 INDEX AREA 5.00 5.00 3.50 6 PIN 1 INDEX AREA (4X) 0.15 40X 0.4 b TOP VIEW BOTTOM VIEW 0.70 C A B 0.00 MIN 0.05 MAX C BASE PLANE SEATING PLANE 0.08 C 0.203 0.035 DETAIL "A" SIDE VIEW (4.80) (3.60) NOTES: (36X 0.40) (3.50) (4.80) 0.90 // 0.10 C 0.10 M 4 5 C 0.2 REF SEE DETAIL "X" 40X0.20 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to ASME Y14.5m-1994. 3. Unless otherwise specified, tolerance : Decimal ± 0.05 4. Dimension b applies to the metallized terminal and is measured between 0.15mm and 0.25mm from the terminal tip. 5. Tiebar shown (if present) is a non-functional feature. 6. The configuration of the pin #1 identifier is optional, but must be located within the zone indicated. The pin #1 identifier may be (40X 0.20) (40X 0.60) either a mold or mark feature. TYPICAL RECOMMENDED LAND PATTERN 1