JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-476 SWITCH ASSEMBLY Frequency Range 5-3000 MHz Configuration 16 independent 1P2T failsafe self-terminating solidstate RF switches Enclosure Type 19 inch rack mount @ 5RU high Startup/Default States (configurable) Maximum attenuation (see ATTEN command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) All of these default settings can be changed by user. Unit can be configured for up to 12 Ethernet users. Impedance 50 Ohms nominal VSWR 1.6:1 maximum 1.4:1 typical Insertion Loss 3.5 dB maximum 2.5 dB typical Isolation 80 dB minimum 70 dB minimum 60 dB minimum RF Input Power +10 dBm +20 dBm +30 dBm Switching Speed 10 microseconds (after command is received and processed) (3 milliseconds typical processing time) Manual Control 20-Button Keypad and LCD display (IP Address configurable via keypad) (Net mask configurable via keypad) (Gateway configurable via keypad) (Baud rate configurable via keypad) Remote Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) 5-1000 MHz 1000-2000 MHz 2000-3000 MHz 5-20 MHz 20-100 MHz 100-3000 MHz --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-476 SWITCH ASSEMBLY Remote Commands RF Switch Control Commands: Switch, Set Switch, Read Switch, Set All Switches, Read All Switches System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt AC Supply 100-240 VAC @ 47-63 Hz RF Connector BNC, N, SMA or TNC female Operating Temperature Range 0º to +70º C Physical Size See outline drawing 092-8108 ECR/ECN # DATE REV 10/01/2014 24239 Page 2 of 2 06/05/2015 APPR / DATE ECR/ECN # TRS 10/01/2014 A TRS 06/05/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE