JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-508 SOLID-STATE SWITCH ASSEMBLY Frequency Range 20-4300 MHz Configuration 1P4T self-terminating solid-state RF switch Indicators LED's on front panel denote active port Enclosure Type 19 inch rack mount @ 1RU high Startup/Default States (configurable) RF switch off at startup (see SWITCH command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) Impedance 50 Ohms nominal VSWR 1.6:1 maximum < 1.5:1 typical Insertion Loss 4.5 1.6 2.0 3.3 Isolation 50 95 84 63 RF Input Power +20 dBm 20-100 MHz +30 dBm 100-4300 MHz Switching Speed 10 microseconds (after command is received and processed) (3 milliseconds typical processing time) Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) Remote Command Format RF Switch Control Commands: Switch, Set Switch, Read Switch dB dB dB dB dB dB dB dB maximum typical @ 20 MHz typical @ 2000 MHz typical @ 4300 MHz minimum typical @ 20 MHz typical @ 2000 MHz typical @ 4300 MHz System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-508 SOLID-STATE SWITCH ASSEMBLY AC Supply 100-240 VAC @ 47-63 Hz 2 Amp 5x20mm "Slo-Blo" AC fuse Littelfuse #215-002, JFW #025-021 RF Connectors SMA female or BNC female Operating Temperature Range 0º to +50ºC Physical Size See outline drawing 092-8320 ECR/ECN # DATE 05/19/2015 Page 2 of 2 REV APPR / DATE ECR/ECN # TRS 05/19/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE