JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50SA-509 SOLID-STATE SWITCH ASSEMBLY Frequency Range 700-3000 MHz Configuration 1P12T self-terminating solid-state RF switch Indicators LED's on front panel denote active port Enclosure Type 19 inch rack mount @ 1RU high Startup/Default States (configurable) RF switch off at startup (see SWITCH command) DHCP enabled (see NET command) 4 Ethernet users (see NET command) Prompts off (see PROMPT command) Impedance 50 Ohms nominal VSWR 1.6:1 maximum Insertion Loss 4.0 dB maximum 2.0 dB typical @ 700 MHz 3.3 dB typical @ 3000 MHz Isolation 60 dB minimum RF Input Power +30 dBm Switching Speed 20 microseconds (after command is received and processed) (3 milliseconds typical processing time) Control Ethernet (DHCP, TCP/IP, 10/100, up to 12 users) RS-232 (up to 115200 Baud) Remote Command Format RF Switch Control Commands: Switch, Set Switch, Read Switch System Commands: Help, Identification, Store, Recall, Pause, Net, Serial, Close, Disconnect, MOTD, Date, Message, Restrict, IDENT, Name, Show Users, Reboot, Uptime, Prompt AC Supply 100-240 VAC @ 47-63 Hz 2 Amp 5x20mm "Slo-Blo" AC fuse Littelfuse #215-002, JFW #025-021 RF Connectors SMA female Operating Temperature Range 0º to +50ºC Physical Size See outline drawing 092-8323 ECR/ECN # DATE 05/26/2015 Page 1 of 1 REV APPR / DATE ECR/ECN # TRS 05/26/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE