JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1422 1P2T SOLID STATE RF SWITCH Frequency Range 100-500 MHz Configuration 1P2T Impedance 50 Ohms nominal VSWR 1.25:1 maximum Insertion Loss 0.5 dB maximum Isolation 55 dB minimum Switching Speed 40 microseconds (50% TTL to 10% or 90% RF) RF Input Power 250 Watts average (cold switch) 500 Watts peak (1usec pulse) 100 Watts average (hot switch*) Control (1 line) TTL Low for J1-COM TTL High for J2-COM (off port is reflective) DC Supply +15 Vdc @ 250 mA +5 Vdc @ 40 mA RF Connector BNC, SMA, TNC or N female Operating Temperature Range -20ºC to +70ºC Storage Temperature Range -55ºC to +85ºC Physical Size See outline drawing 092-3022 (N) 092-5245 (SMA) * If switch rate exceeds 1000 cycles per second, external heatsinking will be required to maintain a maximum case temperature of +70ºC. ECR/ECN # DATE REV 04/06/2005 25878 Page 1 of 1 11/04/2015 APPR / DATE ECR/ECN # BAC 04/06/2005 A BAC 11/04/2015 JFW FORM E-7-F REV F DATE REV APPR / DATE