JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50S-1832 1P2T SOLID STATE RF SWITCH Frequency Range 960-1300 MHz Configuration 1P2T Impedance 50 Ohms nominal VSWR 1.2:1 typical 1.3:1 maximum Insertion Loss 0.50 dB typical 0.75 dB maximum Isolation 46 dB typical 40 dB minimum Switching Speed 10 microseconds maximum (50% TTL to 10% or 90% RF) 6 microseconds typical OFF-ON 6 microseconds typical ON-OFF RF Input Power 200 Watts average (Cold switch) 1000 Watts Peak @ 35usec pulse width Control (1 line) TTL "Low" (0-0.8V) COM to J1 TTL "High"(2.0-5.0V)COM to J2 DC Supply +15 Vdc @ 250 mA nominal and +5 Vdc @ 40 mA nominal RF Connector N female or SMA female Operating Temperature Range -20ºC to +70ºC Storage Temperature Range -55ºC to +85ºC Physical Size See outline drawing 092-3022 (N) 092-5245 (SMA) ECR/ECN # DATE REV 06/25/2009 Page 1 of 1 APPR / DATE ECR/ECN # DATE REV APPR / DATE BAC 06/25/2009 21090 01/03/2012 C BAC 01/03/2012 22769 04/16/2013 D BAC 04/16/2013 18898 07/21/2010 A BAC 07/21/2010 19480 12/09/2010 B BAC 12/09/2010 JFW FORM E-7-F REV F