Plastic Packages for Integrated Circuits Package Outline Drawing M16.173A 16 LEAD HEATSINK THIN SHRINK SMALL OUTLINE PACKAGE (HTSSOP) Rev 1, 2/15 A 1 3 3.00 ±0.10 5.00 ±0.10 SEE DETAIL "X" 9 16 PIN #1 I.D. MARK 6.40 4.40 ±0.10 2 3.00 ±0.10 3 0.20 C B A 1 8 B 0.65 EXPOSED THERMAL PAD 0.09 TO 0.20 END VIEW TOP VIEW BOTTOM VIEW - 0.05 H 1.00 REF C 1.20 MAX SEATING PLANE 0.90 +0.15/-0.10 GAUGE PLANE 0.25 +0.05/-0.06 5 0.10 M C B A 0.10 C 0.25 0°-8° 0.05 MIN 0.15 MAX SIDE VIEW 0.60 ±0.15 DETAIL "X" (1.45) NOTES: (5.65) ( 3.00) 1. Dimension does not include mold flash, protrusions or gate burrs. Mold flash, protrusions or gate burrs shall not exceed 0.15 per side. 2. Dimension does not include interlead flash or protrusion. Interlead flash or protrusion shall not exceed 0.25 per side. 3. Dimensions are measured at datum plane H. 4. Dimensioning and tolerancing per ASME Y14.5M-1994. (0.65 TYP) (0.35 TYP) TYPICAL RECOMMENDED LAND PATTERN 1 5. Dimension does not include dambar protrusion. Allowable protrusion shall be 0.08mm total in excess of dimension at maximum material condition. Minimum space between protrusion and adjacent lead is 0.07mm. 6. Dimension in ( ) are for reference only. 7. Conforms to JEDEC MO-153.