36X K 0.15 T U K K1 REF 0.10 M T U S V S ÇÇÇ ÉÉÉ ÉÉÉ ÇÇÇ U S NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE W. J J1 2X L/2 36 19 SECTION N–N B L 1 18 N 0.25 0.15 T U q S V A N F DETAIL E D C 0.10 G T H DETAIL E SEATING PLANE W DIM A B C D F G H J J1 K K1 L q MILLIMETERS MIN MAX 12.40 12.60 5.50 5.70 ––– 1.20 0.05 0.15 0.50 0.75 0.65 BSC 0.72 0.82 0.09 0.20 0.09 0.16 0.19 0.30 0.19 0.25 7.60 BSC 0_ 10 _ CASE 1244–01 ISSUE O DATE 06/30/97