SAW Bandpass Filter F6501 Features RF bandpass filter High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device (SMD) Package RoHS Compliant 3.80±0.15 ITF 6501 3 6 1 5 5 2 4 4 3 1.27±0.1 2 1.90±0.1 6 1.50 MAX 3.80±0.15 1 1.00±0.1 1.60±0.1 Package Dimensions Dimensions shown are nominal in millimeters Pin Configuration Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 2 Input 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range °C -40 25 85 Storage Temperature Range °C -40 25 85 Power Handling Capability dBm - - 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 1/8 SAW Bandpass Filter F6501 Specifications Fc = 650.0MHz Minimum Typical Maximum MHz - 650 - dB - 1.5 2.0 4.0 dBp-p - 0.5 1.0 Absolute Group Delay at Fc nsec - 100 - Group Delay Variation (648 ~ 652 MHz) nsec - 50 - - 1.5 2.0 55 50 45 40 - 50 - Center Frequency ( Fc ) Insertion Loss (648 ~ 652 MHz) Amplitude Ripple (648 ~ 652 MHz) VSWR (648 ~ 652 MHz) Relative Attenuation 0.3~600 MHz 668~1150 MHz 1150~1500 MHz 1500!2500 MHz dB 40 40 35 30 Input/Output Impedance Ohms - Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 2/8 SAW Bandpass Filter F6501 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration ITF1) 65012) 1) Manufacturer name 2) Marking Number I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 3/8 SAW Bandpass Filter F6501 Typical Performance ( at 25℃ ℃ ) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 4/8 SAW Bandpass Filter F6501 Typical Performance ( at 25℃ ℃ ) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 5/8 SAW Bandpass Filter F6501 Input / Output VSWR Charts Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 6/8 SAW Bandpass Filter F6501 Packing Specification 1. Reeling Quantity : 1000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 7/8 SAW Bandpass Filter F6501 Carrier Tape Dimensions [unit : mm] A 4.30 ± 0.1 B 4.30 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F6501 Rev. Date 2014-12-08 Rev. NSNI04-AS02 8/8