213

SENSITRON
SEMICONDUCTOR
SHD226404
TECHNICAL DATA
DATA SHEET 213, REV. B
Formerly Part Number SHD2264
HERMETIC POWER MOSFET N-CHANNEL
FEATURES:
• 400 Volt, 0.55 Ohm, 6.9 A MOSFET
• Low RDS (on)
• Equivalent to IRFY340 Series
• Add a C after SHD for ceramic eyelets
MAXIMUM RATINGS
ALL RATINGS ARE AT T = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT @ TC = 25°C
PULSED DRAIN CURRENT @ TC = 25°C
OPERATING AND STORAGE TEMPERATURE
TOTAL DEVICE DISSIPATION @ TC = 25°C
C
SYMBOL
VGS
ID (on)
IDM
TOP/TSTG
PD
MIN.
-55
-
TYP.
-
MAX.
±20
6.9
27
+150
60
UNITS
Volts
Amps
Amps
°C
Watts
SYMBOL
BVDSS
MIN.
400
TYP.
-
MAX.
-
UNITS
Volts
Qgs
2.2
-
10
nC
Qgd
13.8
-
40.5
nC
-
0.55
0.63
4.0
-
Ω
ELECTRICAL CHARACTERISTICS
CHARACTERISTIC
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 1.0 mA
GATE TO SOURCE ON-STATE VOLTAGE
VGS = 10V, ID = 6.9A, VDS = 0.5 X VDS Max.
GATE DRAIN CHARGE
VGS = 10V, ID = 6.9A, VDS = 0.5 X VDS Max.
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 4.4A
VGS = 10V, ID = 6.9A
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 250μA
FORWARD TRANSCONDUCTANCE
VDS ≥ 15VDS(on), ID = 4.4A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8x Max. Rating, VGS = 0V
VDS = 0.8x Max. Rating, VGS = 0V, TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDD = 200V,
RISE TIME
ID =6.9A,
TURN OFF DELAY TIME
RG = 9.1Ω,
FALL TIME
VGS = 10V
DIODE FORWARD VOLTAGE
TC = 25°C, IS = 6.9A,
VGS = 0V
REVERSE RECOVERY TIME
TJ = 25°C,
IS = 6.9 A, di/dt = 100A/μsec,
VDD ≤ 50 V
INPUT CAPACITANCE
VGS = 0 V,
OUTPUT CAPACITANCE
VDS = 25 V,
REVERSE TRANSFER CAPACITANCE
f = 1.0MHz
THERMAL RESISTANCE, JUNCTION TO CASE
RDS(ON)
VGS(th)
gfs
2.0
-
7.7
-
-
IDSS
IGSS
-
-
td(ON)
tr
td(OFF)
tf
VSD
-
-
-
-
trr
-
-
Ciss
Coss
Crss
RthJC
-
-
1400
350
230
-
Volts
S(1/Ω)
25
250
100
-100
25
92
79
58
1.5
µA
Volts
660
nsec
nA
nsec
pF
2.1
©2002 Sensitron Semiconductor •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected] •
°C/W
SHD226404
SENSITRON
DATA SHEET 213
REVISION B
Formerly Part Number SHD2264
MECHANICAL DIMENSIONS: in Inches / mm
.150 (3.81
Dia.
.140 3.56)
.665 (16.89
.645 16.38)
.537 (13.64
.527 13.39)
1.132 (28.75
1.032 26.21)
1
.035 (0.89
.025 0.63)
3 Places
.200 (5.08
.190 4.82)
.420 (10.67
.410 10.41)
2
.045 (1.14
.035 0.89)
.430 (10.92
.410 10.41)
3
.100(2.54) BSC
2 Places
.120(3.05) BSC
TO-257
PINOUT TABLE
DEVICE TYPE
MOSFET IN A
TO-257 PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the
latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic
equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature
assured safety or by means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the
datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage
resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application
will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or
any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with
related laws and regulations.
©2002 Sensitron Semiconductor •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 •
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • [email protected]