SENSITRON SEMICONDUCTOR SHD225452 TECHNICAL DATA DATA SHEET 4102, REV. A HERMETIC POWER MOSFET P-CHANNEL FEATURES: -100 Volt, 0.08 Ohm, -34A MOSFET Fast Switching Low RDS (on) Electrically Equivalent to IRF5210 Add an “S” to the end of the part number for S-100 screening, SHD225452S Add a “C” to the part number for ceramic seals, SHDC225452 MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT VGS=-10V, TC = 25C VGS=-10V, TC = 100C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE, JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25C SYMBOL VGS ID MIN. - TYP. - UNITS Volts Amps - MAX. 20 -34 -21 +150 1.0 125 TOP/TSTG RthJC PD -55 - BVDSS -100 - - Volts RDS(ON) - - 0.08 VGS(th) gfs -2.0 10 - -4.0 - Volts S(1/) - -25 -250 100 -100 180 25 100 - A C C/W Watts ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = -250A STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = -10V, ID = -21A GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250A FORWARD TRANSCONDUCTANCE VDS = -15V, IDS = -21A ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TOTAL GATE CHARGE VGS = -10 V, GATE TO SOURCE CHARGE VDS = -80 V, GATE TO DRAIN CHARGE ID = -21A TURN ON DELAY TIME VDD = -50V, RISE TIME ID = -21A TURN OFF DELAY TIME RG = 2.5 FALL TIME DIODE FORWARD VOLTAGE Tj = 25C, IS = -21A VGS = 0V REVERSE RECOVERY TIME T J = 25C, If = -21A diF/ds = 100A/sec INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = -25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz IDSS IGSS - - Qg Qgs Qgd td(ON) tr td(OFF) tf VSD - - - - 28 150 100 120 - trr - - Qrr Ciss Coss Crss nA nC nsec -1.8 Volts 260 - nsec 1.8 2700 790 450 - C ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] pF SHD225452 SENSITRON TECHNICAL DATA DATA SHEET 4102, REV. A MECHANICAL DIMENSIONS: in Inches / mm .149 (3.78 Dia. .139 3.53) .260 .249 .050 .040 .545 (13.84 .535 13.60) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) (6.60 6.32) (1.27 1.02) 1 2 .045 (1.14 .035 0.89) 3 Places 3 .150(3.81) BSC 2 Places .150(3.81) BSC TO-254 PINOUT TABLE DEVICE TYPE MOSFET, TO-254 PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2015 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]