Data Sheet CONNECTsystem for LINEARlight LM-2x Benefits ¾ Easy assembly without soldering ¾ Assembly without tools ¾ Reduced assembly work schedule ¾ Low profile ¾ Highly shock resistant Applications ¾ Connector system for LINEARlight LM01A Technical Operating Data and Ordering Guide Product EAN * S-Unit * Max Voltage [V] Max Current [A] LM-2PIN Diameter of Wire [mm² / AWG] 4008321908629 500 11 2 LM-2CONN 4008321908643 500 11 2 - / LM-2CONN-50 4008321908667 500 11 2 0,35 / 22 Length of Wire [mm] 0,35 / 22 - 500 48 *) EAN: Bag containing 10 pieces S-Unit: Modules per shipping unit Technical Features ¾ Easy connection by OSRAM CONNECTsystem ¾ Feeder LM-2PIN for connection with power by Feeder and Connector ¾ Use only in indoor applications or in luminaires with IP67 rating supply ¾ Feeder LM-2PIN with cable end sleeve ¾ Feeder LM-2PIN with cable horizontal and ¾ Coding by ligament secure from wrong polarity ¾ Proofed according to IEC 60512 (shock and vertical turnable ¾ Connector LM-2CONN for stiff connection of two vibration) LINEARlight ¾ Connector LM-2CONN-50 for flexible connection of two LINEARlight LM-2x - 01.04.2005 Page 1 of 3 Drawings LM-2PIN Housing PBT / white Isolation of Wires PVC / red/black Housing PBT / white Isolation of Wires -/- Housing PBT / white Isolation of Wires PVC / white LM-2CONN LM-2CONN-50 LM-2x - 01.04.2005 Page 2 of 3 Safety Information ¾ All components of the CONNECTsystem must be assembled to avoid any stress on the wires and/or board connectors. The installer must ensure that there is adequate strain relief between the board connection and the wiring. ¾ In order to maintain adequate electrical contact, please refrain from repeat removal, maximum of 5, of the CONNECTsystem. ¾ Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. ¾ The maximum operation current on page 1 may not be exceeded. ¾ The CONNECTsystem is designed for indoor application only. Any unprotected outdoor use is not allowed. ¾ A suitable enclosure IP67 is required if the system is to be exposed to humidity and /or dust. Condensation water in the IP67 enclosure is not allowed. Assembly Information ¾ Assembly must not stress connectors or cables. A stress-fee installation is mandatory. ¾ At the assembly of the CONNECTsystem pay attention on the tracking of the plugs into the slots of the connection places. Sales and Technical Support OSRAM GmbH Hellabrunner Strasse 1 D - 81536 München Germany www.osram.com +49 (0)89 6213-0 Sales and technical support is given by the local OSRAM subsidiaries. On our world wide homepage all OSRAM subsidiaries are listed with complete address and phone numbers. Related and Further Information ¾ Datasheet LINEARlight LM01A ¾ The new dimension of light ¾ New standards for LED control gear LM-2x - 01.04.2005 www.osram.com/led-systems-downloads 153 S006 GB www.osram.com/led-systems-downloads 130 W011 GB www.osram.com/ecg-download Page 3 of 3