www.osram.com PrevaLED® Linear Slim 3 550 lm on 140 mm 1100 lm, 2000 lm on 280 mm 2200 lm, 4000 lm on 560 mm 8000 lm on 1400 mm Features • Module efficacy: up to 173 lm/W • • • • • • • • Dimension (l x w x h): • 140 mm x 20 mm x 5 mm • 280 mm x 20 mm x 5 mm • 560 mm x 20 mm x 5 mm • 1400 mm x 20 mm x 5mm CCT: 3000K, 4000K, 6500 K Luminous flux: 550 lm on 140 mm Luminous flux: 1100 lm, 2000 lm on 280 mm Luminous flux: 2200 lm, 4000 lm on 560 mm Luminous flux: 8000 lm on 1400 m Color rendering index Ra: > 80 Initial color consistency: ≤ 3 SDCM Average lifetime (L80 B50): 50,000 h (temperature at Tc = 65 °C) • Geometry according to Zhaga Book 7 L28W2 • ENEC, VDE approval under preparation Benefits • Slim module for design of narrow luminaires • High homogeneity thanks to small LED pitch • 1 x 1400 mm module for trunking system • SELV or non-isolated modules for easy luminaire design Application • Office • Industry Typical technical data* Product name Flux CCT CRI SDCM Uf If P Efficacy (lm) (K) (V) (mA) (W) (lm/W) PL-LIN S-Z3 550-830 140 480 3000K > 80 3 36 88 3,2 152 PL-LIN S-Z3 550-840 140 540 4000K > 80 3 36 88 3,2 172 PL-LIN S-Z3 1100-830 280 959 3000 > 80 3 36 175 6,3 153 PL-LIN S-Z3 1100-840 280 1084 4000 > 80 3 36 175 6,3 173 PL-LIN S-Z3 1100-865 280 1046 6500 > 80 3 36 175 6,3 167 PL-LIN S-Z3 2000-830 280 1751 3000 > 80 3 39 300 11,7 150 PL-LIN S-Z3 2000-840 280 1978 4000 > 80 3 39 300 11,7 169 PL-LIN S-Z3 2000-865 280 1908 6500 > 80 3 39 300 11,7 163 PL-LIN S-Z3 2200-830 560 1918 3000 > 80 3 36 350 12,5 153 PL-LIN S-Z3 2200-840 560 2168 4000 > 80 3 36 350 12,5 173 PL-LIN S-Z3 2200-865 560 2092 6500 > 80 3 36 350 12,5 167 PrevaLED Linear Slim 3, June 2016 page 1 of 9 sram.com PL-LIN S-Z3 4000-830 560 3502 3000 > 80 3 39 600 23,1 150 PL-LIN S-Z3 4000-840 560 3956 4000 > 80 3 39 600 23,1 169 PL-LIN S-Z3 4000-865 560 3816 6500 > 80 3 39 600 23,1 163 PL-LIN S-Z3 8000-830 1400 7873 3000 > 80 3 142,5 350 49,9 158 PL-LIN S-Z3 8000-840 1400 8414 4000 >80 3 142,5 350 49,9 169 Typical values valid for Tp = 65°C Energy Efficiency Class according 2012/874/EC: A++ Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. * Tolerance for optical and electrical data: +/-10 Maximum Values Product name Max. Flux Max. Uf Max. If Max. P Efficacy @ max (lm) (V) (mA) (W) (lm/W) PL-LIN S-Z3 550-830 140 770 37 150 5.6 137 PL-LIN S-Z3 550-840 140 870 37 150 5.6 155 PL-LIN S-Z3 1100-830 280 1539 37 300 11.2 137 PL-LIN S-Z3 1100-840 280 1740 37 300 11.2 155 PL-LIN S-Z3 1100-865 280 1678 37 300 11.2 150 PL-LIN S-Z3 2000-830 280 2487 40 450 18.1 137 PL-LIN S-Z3 2000-840 280 2810 40 450 18.1 155 PL-LIN S-Z3 2000-865 280 2711 40 450 18.1 149 PL-LIN S-Z3 2200-830 560 3078 37 600 22.4 137 PL-LIN S-Z3 2200-840 560 3480 37 600 22.4 155 PL-LIN S-Z3 2200-865 560 3356 37 600 22.4 150 PL-LIN S-Z3 4000-830 560 4974 40 900 36.3 137 PL-LIN S-Z3 4000-840 560 5620 40 900 36.3 155 PL-LIN S-Z3 4000-865 560 5422 40 900 36.3 149 PL-LIN S-Z3 8000-830 1400 9865 146 450 65.8 150 PL-LIN S-Z3 8000-840 1400 10560 146 450 65.8 161 Nom. Uf Nom. If Nom. P Efficacy @ nom (V) (mA) (W) (lm/W) *) Exceeding maximum ratings for operating and storage temperature will reduce expected lifetime or destroy the light engine. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in thermally settled conditions with a temperature sensor. For exact location of the Tc -point see drawing below Electrical parameter for nominal flux Product name Nom. Flux (lm) PL-LIN S-Z3 550-830 140 550 36 101 3.6 152 PL-LIN S-Z3 550-840 140 550 36 89 3.2 172 PL-LIN S-Z3 1100-830 280 1100 36 201 7.2 153 PL-LIN S-Z3 1100-840 280 1100 36 178 6.4 173 PL-LIN S-Z3 1100-865 280 1100 36 184 6.6 167 PL-LIN S-Z3 2000-830 280 2000 39 343 13.3 150 PL-LIN S-Z3 2000-840 280 2000 39 303 11.8 169 PL-LIN S-Z3 2000-865 280 2000 39 314 12.2 163 PL-LIN S-Z3 2200-830 560 2200 36 401 14.4 153 PL-LIN S-Z3 2200-840 560 2200 36 355 12.7 173 PL-LIN S-Z3 2200-865 560 2200 36 368 13.2 167 PrevaLED Linear Slim 3, June 2016 page 2 of 9 sram.com PL-LIN S-Z3 4000-830 560 4000 39 685 26.7 150 PL-LIN S-Z3 4000-840 560 4000 39 607 23.6 169 PL-LIN S-Z3 4000-865 560 4000 39 629 24.5 163 PL-LIN S-Z3 8000-830 1400 8000 142 356 50.8 158 PL-LIN S-Z3 8000-840 1400 8000 142 331 46.9 171 Optical parameter # LED Pitch [mm] PL-LIN S-Z3 550-8xx 140 13 10.8 PL-LIN S-Z3 1100-8xx 280 26 10.8 PL-LIN S-Z3 2000-8xx 280 42 6.7 PL-LIN S-Z3 2200-8xx 560 52 10.8 PL-LIN S-Z3 4000-8xx 560 84 6.7 PL-LIN S-Z3 8000-8xx 1400 150 9.3 Product name Lifetime Data PL-LIN S-Z3 550-8xx 140 PL-LIN S-Z3 1100-8xx280 PL-LIN S-Z3 2200-8xx 560 PL-LIN S-Z3 2200-8xx 560 PL-LIN S-Z3 4000-8xx 280 PL-LIN S-Z3 8000-8xx 1400 LxBy x y 70 10 80 50 90 10 [mA] 50 10 50 Lifetime [h] Tp = 50°C I-rated 50.000 50.000 41.000 50.000 22.000 28.000 Tp = 65°C I-rated 50.000 50.000 35.000 50.000 18.000 24.000 Tp= 75°C I-rated 49.000 50.000 32.000 43.000 16.000 21.000 Temperature ratings Tp (performance temperature) 65°C Tc max (maximum temperature) 75°C Ta (ambient temperature range) -20°C < Ta < +75°C Tstg (storage temperature range) -30°C < Ta < +85°C Cable For connecting the module OSRAM recommend to use an AWG 20 (0.5mm²) solid wire cable, max diameter for cable inclusive insulation ~2(+/-0,05)m PrevaLED Linear Slim 3, June 2016 page 3 of 9 ww.osram.com Drawings 550lm – 140mm 1100lm – 280mm 2000lm – 280mm PrevaLED Linear Slim 3, June 2016 page 4 of 9 2200lm – 560mm 4000lm – 560mm 8000lm – 1400mm PrevaLED Linear Slim 3, June 2016 page 5 of 9 Modularity OT FIT CS (triple current driver – SELV) PrevaLED Linear Slim 3 is designed to be operated by OT FIT drivers in parallel connection. Current setting via cable bridge on primary side. OT FIT 27V – 54V OT FIT 35 700 OT FIT 50 1A0 OT FIT 80 1A6 0,5A / 0,6A / 0,7A 0,8A / 0,93A / 1,0A 1,2A / 1,4A / 1,55A 280 x 30 x 21mm 280 x 30 x 21mm 360 x 30 x 21mm 1100lm / 175mA 3, 4 (4), 5, 6 7, 8, (9) 2000lm / 300mA 2 3 4 2200lm / 350mA 2 3 4 4000lm / 600mA 1 --- 2 8000lm / 350mA --- --- --- PrevaLED Linear Slim 3 OTi DALI (wide window driver – SELV) PrevaLED Linear Slim 3 is designed to be operated by OTi DALI drivers in parallel connection. Current setting via Tuner4Tronic software and DALI magic. OTi DALI 27V – 54V OTi DALI 35 0A7 OTi DALI 50 1A4 OTi DALI 80 1A6 OTi DALI 80 2A1 0,2A – 0,7A 0,6A - 1,4A 0,6A - 1,55A 1,0A - 2,1A 360 x 30 x 21mm 360 x 30 x 21mm 360 x 30 x 21mm 423 x 30 x 21mm 1100lm / 175mA 3 (3) - 6 (3) - 8 6 - 10 2000lm / 300mA 2 2-3 2-4 3-6 2200lm / 350mA 2 2-3 2-4 3-5 4000lm / 600mA 1 1-2 1-2 2 - (3) 8000lm / 350mA --- --- --- --- PrevaLED Linear Slim 3 PrevaLED Linear Slim 3, June 2016 page 6 of 9 OT FIT D (single current driver – Non-insolated) PrevaLED Linear Slim 3 is designed to be operated by OT Fit D Non-SELV drivers in serial or combined serial-parallel connection. OT FIT OT FIT 30/220-240/125 D L OT FIT 50/220-240/250 D L OT FIT 50/220-240/350 D L 125mA, 54V – 216V 250mA, 54V – 216V 350mA, 54V – 150V 210 x 30 x 21mm 210 x 30 x 21mm 210 x 30 x 21mm 1100lm / 175mA --- --- 4, 6 (Xs2p) 2000lm / 300mA --- --- 2, 3 (Xs1p) 2200lm / 350mA --- --- 2, 3 (Xs1p) 4000lm / 600mA --- --- PrevaLED Linear Slim 3 --- 8000lm / 350mA 1 OTi (wide window driver – Non-isolated) PrevaLED Linear Slim 3 is designed to be operated by OTi and OTi DALI drivers in serial or combined serialparallel connection. Current setting of OTi via resistor coding (LEDset) and OTi DALI via Tuner4Tronic software and DALI magic. OTi 54V-240V OTi 60 550 OTi 90 1A0 OTi DALI 60 550 OTi DALI 90 1A0 125mA – 550mA 250mA – 1000mA 125mA – 550mA 250mA – 1000mA 280 x 30 x 21mm 280 x 30 x 21mm 280 x 30 x 21mm 280 x 30 x 21mm 1100lm / 175mA 2 – 5* (Xs1p / Xs2p) 4 – 10* (Xs2p / 2sYp) 2 – 5* (Xs1p / Xs2p) 4 – 10* (Xs2p / 2sYp) 2000lm / 300mA 2-4 (Xs1p) 2-5 (Xs1p) 2-4 (Xs1p) 2-5 (Xs1p) 2200lm / 350mA 2-3 (Xs1p) 2-4 (Xs1p) 2-3 (Xs1p) 2-4 (Xs1p) 4000lm / 600mA --- 2-3 (Xs1p) --- 2–3 (Xs1p) 8000lm / 350mA 1 1 1 1 PrevaLED Linear Slim 3 * For 5 x 1100lm please keep Tc temperature below 65°C. and maximum current If = 175mA per module Explanation: - Xs1p: all modules in serial connection Xs2p / 2sYp: parallel connection of X modules in serial connection / serial connection of Y modules in parallel connection (pair modularities only) Installation note Please make sure to keep a clearance of minimum 1mm around the PrevaLED Linear Slim 3 module PrevaLED Linear Slim 3, June 2016 page 7 of 9 Ordering Codes Product name EAN (single product) Order type Shipping Unit PL-LIN S-Z3 550-830 140 4052899 957138 Make to stock 60 x 1 PL-LIN S-Z3 550-840 140 4052899 957152 Make to stock 60 x 1 PL-LIN S-Z3 1100-830 280 4052899 346963 Make to stock 60 x 1 PL-LIN S-Z3 1100-840 280 4052899 346987 Make to stock 60 x 1 PL-LIN S-Z3 1100-865 280 4052899 347007 Make to order 60 x 1 PL-LIN S-Z3 2000-830 280 4052899 347021 Make to stock 60 x 1 PL-LIN S-Z3 2000-840 280 4052899 347045 Make to stock 60 x 1 PL-LIN S-Z3 2000-865 280 4052899 347069 Make to order 60 x 1 PL-LIN S-Z3 2200-830 560 4052899 347083 Make to stock 60 x 1 PL-LIN S-Z3 2200-840 560 4052899 347106 Make to stock 60 x 1 PL-LIN S-Z3 2200-865 560 4052899 347120 Make to order 60 x 1 PL-LIN S-Z3 4000-830 560 4052899 347144 Make to stock 60 x 1 PL-LIN S-Z3 4000-840 560 4052899 347168 Make to stock 60 x 1 PL-LIN S-Z3 4000-865 560 4052899 347182 Make to order 60 x 1 PL-LIN S-Z3 8000-830 1400 4052899 952515 Make to stock 60 x 1 PL-LIN S-Z3 8000-840 1400 4052899 952522 Make to stock 60 x 1 Safety Information • The LED module itself and all its components must not be mechanically stressed. The modules are intended for operation only with matching OPTOTRONIC®. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information") • Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. • Pay attention to standard ESD precautions when installing the module. • Photobiological safety according to IEC 62471, risk group RG1 • Max. Voltage U-OUT = 250V for operation on non-isolated and SELV LED controlgear. Sales and Technical Support OSRAM GmbH Marcel-Breuer-Straße 6 D- Sales and technical support is given by the 80807 München local OSRAM subsidiaries. On our world wide homepage all OSRAM www.osram.com +49 89 6213-0 subsidiaries are listed with complete address and phone numbers. Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves. PrevaLED Linear Slim 3, June 2016 page 8 of 9 OSRAM GmbH Head Office: Marcel-Breuer-Strasse 6 80807 Munich, Germany Phone +49 89 6213-0 www.osram.com PrevaLED Linear Slim 3, June 2016 page 9 of 9