pdf

www.osram.com/PrevaLED-linear
PrevaLED® Linear Value 2
• Homogeneous light distribution
• Consistent white light of 4 SDCM
• Seamless: no shadows between
modules
• Poke-in connectors for 0,5mm²/0,75mm²
wire
• Self-cooling
• Operation on non-isolated or SELV LED
controlgear for easy luminaire design
• Average lifetime 50.000h L80B10
at Tp = 55°C
• According Zhaga book 7 L28W4
• CE, ENEC approval
Light Engines
• 650lm and 1100lm on 280mm
• 1300lm and 2200lm on 560mm
Dimension (l x w x h):
Applications
• 280mm x 32.6mm x 5.8mm
• 560mm x 32.6mm x 5.8mm
•
•
•
•
Benefits
• Efficiency: up to 150 lm/W
Typical technical data*
Office (workplace illumination, corridor)
Commercials (indoor car park)
Industry (storage, warehouse, retail)
Public area (corridor, stairs, subway
Product name
Flux
(lm)
CCT
(K)
CRI
SDCM
Vf
(V)
If
(mA)
P (W)
Module
lm/W*
Module
PLVZ2-LIN-650-830-280-DC
600
3000
> 80
4
36
125
4.5
137
PLVZ2-LIN-650-840-280-DC
630
4000
> 80
4
36
125
4.5
143
PLVZ2-LIN-650-865-280-DC
630
6500
> 80
4
36
125
4.5
143
PLVZ2-Lin-1100-830-280-DC
990
3000
> 80
4
35
200
7.1
143
PLVZ2-Lin-1100-840-280-DC
1040
4000
> 80
4
35
200
7.1
150
PLVZ2-Lin-1100-865-280-DC
1040
6500
> 80
4
35
200
7.1
150
PLVZ2-Lin-1300-830-560-DC
1200
3000
> 80
4
36
250
9.1
137
PLVZ2-Lin-1300-840-560-DC
1260
4000
> 80
4
36
250
9.1
143
PLVZ2-Lin-1300-865-560-DC
1260
6500
> 80
4
36
250
9.1
143
PLVZ2-Lin-2200-830-560-DC
1985
3000
> 80
4
35
400
14.1
143
PLVZ2-Lin-2200-840-560-DC
2080
4000
> 80
4
35
400
14.1
150
PLVZ2-Lin-2200-865-560-DC
2080
6500
> 80
4
35
400
14.1
150
Typical values valid for Tp 55°C
Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to
the actual parameters of each single product which could differ from the typical data.
* Typical value; tolerance for optical and electrical data: +/-10%
PrevaLED Linear Value 2, 02/2015
page 1 of 8
Maximum Values
Product name
Flux
(lm)
Vf
(V)
If
(mA)
P (W)
Module
lm/W
Module
PLVZ2-LIN-650-830-280-DC
720
37,2
150
5,6
129
PLVZ2-LIN-650-840-280-DC
756
37,2
150
5,6
136
PLVZ2-LIN-650-865-280-DC
756
37,2
150
5,6
136
PLVZ2-Lin-1100-830-280-DC
1485
37,6
300
11,3
132
PLVZ2-Lin-1100-840-280-DC
1560
37,6
300
11,3
138
PLVZ2-Lin-1100-865-280-DC
1560
37,6
300
11,3
138
PLVZ2-Lin-1300-830-560-DC
1440
37,2
300
11,1
129
PLVZ2-Lin-1300-840-560-DC
1512
37,2
300
11,1
136
PLVZ2-Lin-1300-865-560-DC
1512
37,2
300
11,1
136
PLVZ2-Lin-2200-830-560-DC
2978
37,6
600
22,6
132
PLVZ2-Lin-2200-840-560-DC
3120
37,6
600
22,6
138
PLVZ2-Lin-2200-865-560-DC
3120
37,6
600
22,6
138
Electrical parameters for nominal flux
Product name
Flux
(lm)
Vf
(V)
If*
(mA)
P (W)
Module
lm/W
Module
PLVZ2-LIN-650-830-280-DC
650
37
135
5.0
131
PLVZ2-LIN-650-840-280-DC
650
36
129
4.7
139
PLVZ2-LIN-650-865-280-DC
650
36
129
4.7
139
PLVZ2-LIN-1100-830-280-DC
1100
36
222
8.0
138
PLVZ2-LIN-1100-840-280-DC
1100
36
212
7.5
146
PLVZ2-LIN-1100-865-280-DC
1100
36
212
7.5
146
PLVZ2-LIN-1300-830-560-DC
1300
37
271
9.9
131
PLVZ2-LIN-1300-840-560-DC
1300
36
258
9.4
139
PLVZ2-LIN-1300-865-560-DC
1300
36
258
9.4
139
PLVZ2-LIN-2200-830-560-DC
2200
36
443
15.9
139
PLVZ2-LIN-2200-840-560-DC
2200
36
423
15.0
146
PLVZ2-LIN-2200-865-560-DC
2200
36
423
15.0
146
Values valid for Tp/Tc = 55°C
Maximum current allowed: 650lm 150mA, 1100lm and 1300lm 300mA, 2200lm 600mA
PrevaLED Linear Value 2, 02/2015
page 2 of 8
Optical parameters
#
LED
Pitch
(mm)
PLVZ2-LIN-650-8xx-280-DC
12
23.3 mm
PLVZ2-LIN-1100-8xx-280-DC
24
11.7 mm
PLVZ2-LIN-1300-8xx-560-DC
24
23.3 mm
PLVZ2-LIN-2200-8xx-560-DC
48
11.7 mm
Product name
Minimum and Maximum Ratings
Storage
temperature [ °C ]
Tc max.*
(@ typ. current)
L80 B50 @
Tc max. 70°C
PLVZ2-LIN-650-8xx-280-DC
-35 … 85
70°C
50,000h
PLVZ2-LIN-1100-8xx-280-DC
-35 … 85
70°C
50,000h
PLVZ2-LIN-1300-8xx-560-DC
-35 … 85
70°C
50,000h
PLVZ2-LIN-2200-8xx-560-DC
-35 … 85
70°C
50,000h
Product
,
The modules are designed for operation with OPTOTRONIC® ECG.
*) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the light engine. The temperature of the LED module must be
measured at the tc-point according to EN60598-1 in thermally settled conditions with a temperature sensor. For exact location of the Tc -point see drawing below (marked as Tc1 and
Tc2).
Illustration of the temperature dependent lumen maintenance (B50) at current Inom
PrevaLED Linear Value 2, 02/2015
page 3 of 8
Modularity
OT FIT CS (triple current driver – SELV)
PrevaLED Linear Value 2 is designed to be operated by OT FIT SELV drivers in parallel
connection*. Current setting via cable bridge on primary side.
OT FIT
27V – 54V
OT FIT 80 1A6
OT FIT 50 1A0
OT FIT 35 0A7
1,2A / 1,4A / 1,55A
0,8A / 0,93A / 1,0A
0,5A / 0,6A / 0,7A
360 x 30 x 21mm
280 x 30 x 21mm
280 x 30 x 21mm
650lm / 125mA
10
8,6
6,5,4
1100lm / 200mA
10,8,6
5,4,3
3
1300lm / 250mA
-
4,3
3,2
2200lm / 400mA
4
2
-
PrevaLED
Linear Value 2
*
Final release of modularity under evaluation.
OTi DALI (wide window driver – SELV)
PrevaLED Linear Value 2 is designed to be operated by OTi DALI drivers in parallel
connection*. Current setting via DALI wizard software and DALI magic**.
OTi DALI
27V – 54V
OTi DALI 80 2A1
OTi DALI 80 1A6
OTi DALI 50 1A4
OTi DALI 35 0A7
1,0A - 2,1A
0,6A - 1,55A
0,6A - 1,4A
0,2A – 0,7A
423 x 30 x 21mm
360 x 30 x 21mm
360 x 30 x 21mm
360 x 30 x 21mm
650lm / 125mA
10,8
10,8,6,5
10,8,6
5,4
1100lm / 200mA
10,8,6,5
8,6,5,4
6,5,4
3
1300lm / 250mA
8,6,4
6,4,3
4,3
2
2200lm / 400mA
4
4,2
3,2
-
PrevaLED
Linear Value 2
*
**
Final release of modularity under evaluation.
Current setting via LEDset 2 not supported by this version of PrevaLED Linear Value 2.
PrevaLED Linear Value 2, 02/2015
page 4 of 8
OT FIT D (single current driver – Non-SELV)
PrevaLED Linear Value 2 is designed to be operated by OT Fit D Non-SELV drivers in serial or combined
serial-parallel connection*.
OT FIT OT FIT 30/220-240/125 D L OT FIT 50/220-240/250 D L OT FIT 50/220-240/350 D L
PrevaLED
Linear Value 2
*
125mA, 54V – 216V
210 x 30 x 21mm
250mA, 54V – 216V
210 x 30 x 21mm
350mA, 54V – 150V
210 x 30 x 21mm
650lm / 125mA
5,4,3,2 (Xs1p)
10,8,6 (Xs2p)
-
1100lm / 200mA
-
5,4,3,2 (Xs1p)
6,4 (Xs2p)
1300lm / 250mA
-
4,3,2 (Xs1p)
-
2200lm / 400mA
-
-
4,3,2 (Xs1p)
Final release of modularity under evaluation.
OTi (wide window driver – Non-SELV)
PrevaLED Linear Value 2 is designed to be operated by OTi and OTi DALI drivers in serial or combined
serial-parallel connection*. Current setting of via resistor coding (LEDset) and for OTi DALI drivers also via
Tuner4Tronic software and DALI magic.
OTi 60 550
OTi 90 1A0
OTi DALI 60 550
OTi DALI 90 1A0
120mA – 550mA
250mA – 1000mA
125mA – 550mA
250mA – 1000mA
280 x 30 x 21mm
280 x 30 x 21mm
280 x 30 x 21mm
280 x 30 x 21mm
650lm /
125mA/4,5W
10,8,6 (Xs2p)
5,4,3,2 (Xs1p)
10,8,6,4 (Xs2p)
10,8,6 (Xs2p)
5,4,3,2 (Xs1p)
10,8,6,4 (Xs2p)
1100lm /
200mA/7,2W
8,6 (Xs2p)
5,4,3,2 (Xs1p)
10,8,6,4 (Xs2p)
8,6 (Xs2p)
5,4,3,2 (Xs1p)
10,8,6,4 (Xs2p)
1300lm /
250mA/9W
4,3,2 (Xs1p)
8,6 (Xs2p)
5,4,3,2 (Xs1p)
4,3,2 (Xs1p)
8,6 (Xs2p)
5,4,3,2 (Xs1p)
2200lm /
400mA/14,4W
4,3,2 (Xs1p)
4,3,2 (Xs1p)
4,3,2 (Xs1p)
4,3,2 (Xs1p)
OTi
54V-240V
PrevaLED
Linear Value 2
*
Final release of modularity under evaluation.
PrevaLED Linear Value 2, 02/2015
page 5 of 8
Connection
Parallel connection
Serial connection
Combined serial-parallel connection
PrevaLED Linear Value 2, 02/2015
page 6 of 8
Drawings
PrevaLED Linear Value 2: PLVZ2-LIN-650-8x0-280-DC
PrevaLED Linear Value 2: PLVZ2-LIN-1100-8x0-280-DC
PrevaLED Linear Value 2: PLVZ2-LIN-1300-8x0-560-DC
PrevaLED Linear Value 2: PLVZ2-LIN-2200-8x0-560-DC
PrevaLED Linear Value 2, 02/2015
page 7 of 8
Safety Information

The LED module itself and all its components must not be mechanically stressed.

When handling the module without use of mountain screws avoid excessive force on the cover as it may be separated from the
PCB.

The integrated mounting and locking mechanism on the cover of the module is intended to center and lock a reflector. Excessive
force on this mechanism may cause permanent damage to the module.
The modules are intended for operation only with matching OPTOTRONIC®
To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be
ENEC certified. In Europe the declarations of conformity must include the following standards:
CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384.
Also check for the mark of an independent authorized certification institute.
Please see the relevant brochure for more detailed information (see "Related and Further Information")
OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation.

Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards.
Only qualified personnel should be allowed to perform installations.

Pay attention to standard ESD precautions when installing the module.

Important information on photobiological safety is available in the application guide.

Max. Voltage U-OUT = 250V for operation on non-isolated and SELV LED controlgear.
Assembly Information

For optimum cooling a thermally conducting layer should be applied between module and heat sink.

Further details and recommendation for mounting can be found in the application guide.
Ordering codes
Product name
PLVZ2-LIN-650-830-280-DC
PLVZ2-LIN-650-840-280-DC
PLVZ2-LIN-650-865-280-DC
PLVZ2-LIN-1100-830-280-DC
PLVZ2-LIN-1100-840-280-DC
PLVZ2-LIN-1100-865-280-DC
PLVZ2-LIN-1300-830-560-DC
PLVZ2-LIN-1300-840-560-DC
PLVZ2-LIN-1300-865-560-DC
PLVZ2-LIN-2200-830-560-DC
PLVZ2-LIN-2200-840-560-DC
PLVZ2-LIN-2200-865-560-DC
*) EAN: Ordering number per single PRODUCT
EAN *
S-Unit **
4052899 935594
4052899 935600
4052899 935617
4052899 935624
4052899 935631
4052899 935648
4052899 935655
4052899 935662
4052899 935679
4052899 935686
4052899 935693
4052899 935709
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
40 x 1
**) S-Unit: products per shipping unit
Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves.
Sales and Technical Support
OSRAM GmbH
Marcel-Breuer-Straße 6
D-80807 München
Deutschland
www.osram.com
+49 89 6213-0
Sales and technical support is given by the local OSRAM subsidiaries. On our world wide homepage all
OSRAM subsidiaries are listed with complete address and phone numbers.
PrevaLED Linear Value 2, 02/2015
page 8 of 8