www.osram.com/prevaled-linear PrevaLED® Linear Slim Preliminary Data sheet Benefits Light Engines 630lm and 1000lm • Efficacy: Over 100 lm/W • Homogeneous light distribution (4.2 mm pitch) for 630lm and 1000lm, (4.7 mm pitch) 2000lm • Consistent white light < 3 SDCM • Seamless: no shadows between modules Light Engines 2000lm • Non-SELV ECG for compact drivers • Dimmable (5-100%) Application • Office (such as workplace illumination, corridor) • Industry (such as storage, warehouse, retail) Technical operation data Flux [lm] @ Tc 65°* CCT [K] Typ. CRI SDCM Module P [W] Module [lm/W] @ Tc 65° Module [lm/W] @ Tc 35° L80 B50 [h] @ Tc 65°** 1 2000 3000 85 <3 18.3 109 113 60.000 1 2000 4000 85 <3 17.8 112 119 60.000 1 1000 3000 85 <3 9.5 105 109 60.000 1 1000 4000 85 <3 8.3 120 125 60.000 1 1000 5000 85 <3 8.3 120 125 60.000 630 3000 85 <3 5.9 107 111 60.000 Product name LEP-2000-830-LS LEP-2000-840-LS LEP-1000-830-LS LEP-1000-840-LS LEP-1000-850-LS 1 LEP-630-830-LS 1 LEP-630-840-LS 630 4000 85 <3 5.4 117 123 60.000 1 2000 3000 85 <3 19.0 99 - 60.000 1 2000 4000 85 <3 16.5 112 - 60.000 1 4000 3000 85 <3 36.6 103 - 60.000 1 4000 4000 85 <3 35.7 115 - 60.000 LEP-2000-830-LS560 LEP-2000-840-LS560 LEP-4000-830-LS560 LEP-4000-840-LS560 Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. * Tolerance for optical and electrical data: +/-10% **average Lifetime L80B50 (lumen maintenance) up to 60.000h Attention: due to NON-SELV Concept the Light Engines has to be protected against physical contact in operation 1 Target values, available in September LEP Linear Slim, 2012/ September page 1 of 11 Technical Features • Dimension (l x w): 279.4 x 20 mm and 559.4 x 20 mm 132 LED for 2000lm – 560mm, 120 LED for 4000lm – 560mm • Lumen package: 630, 1000, 2000lm – 280mm and 2000, 4000lm – 560mm • Wire connection module to ECG & module to module • Color temperature: • Various fixation (M3 and M4 screw) possibilities enable good thermal contact 3000K, 4000K, 5000K – 280mm and 3000K, 4000K – 560mm ® • Operation by dedicated OPTOTRONIC OT • 66 LED for 630 &1000lm – 280mm modules, 60 LED for 2000lm – 280mm, Minimum and Maximum Ratings Storage temperature [ °C ] Tc max.* (@ typ. current) L80 B50 @ Tc max. 75°C LEP-2000-830-LS LEP-2000-840-LS -20 … 85 -20 … 85 75°C 75°C 45.000 h 45.000 h LEP-1000-830-LS -20 … 85 75°C 45.000 h LEP-1000-840-LS LEP-1000-850-LS -20 … 85 -20 … 85 75°C 75°C 45.000 h 45.000 h LEP-630-830-LS LEP-630-840-LS -20 … 85 -20 … 85 75°C 75°C 45.000 h 45.000 h LEP-2000-830-LS-560 -20 … 85 75°C 45.000 h LEP-2000-840-L-S560 LEP-4000-830-L-S560 -20 … 85 -20 … 85 75°C 75°C 45.000 h 45.000 h LEP-4000-840-L-S560 -20 … 85 75°C 45.000 h Product The modules are designed for operation with OTp OPTOTRONIC® ECG. *) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the light engine. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in thermally settled conditions with a temperature sensor. For exact location of the Tc -point see drawing below (marked as Tc1 and Tc2). Luminous Flux over Tc 112% 110% Phiv / Phiv TC 65°C 108% 106% 104% 102% 100% 98% 96% 15 25 35 45 55 65 75 Tc [°C] valid for specified typical current LEP Linear Slim, 2012/ September page 2 of 11 85 Product name Typ. Current Typ. Forward Voltage LEP-2000-830-LS 213 mA 86 V LEP-2000-840-LS 208 mA 86 V LEP-1000-830-LS 102 mA 93 V LEP-1000-840-LS 90 mA 92 V LEP-1000-850-LS 90 mA 92 V LEP-630-830-LS 58 mA 101 V LEP-630-840-LS 54 mA 100 V LEP-2000-830-LS-560 204 mA 93 V LEP-2000-840-LS-560 180 mA 92 V LEP-4000-830-LS-560 426 mA 86 V LEP-4000-840-LS-560 416 mA 86 V Average Lifetime (lumen maintenance) over Tc (case temperature) 120000 100000 average Lifetime [h] 80000 60000 40000 20000 L80B50 0 40 45 50 55 60 65 70 75 Tc [°C] Estimated average lifetime versus case temperature (indication only) valid for specified typical current LEP Linear Slim, 2012/ September page 3 of 11 80 Drawings General dimensions for all types of modules (incl. 560mm-long modules) are the same: LEP-630-xxx-LS, LEP-1000-xxx-LS, LEP-2000-xxx-LS, LEP-1000-xxx-LS-560 & LEP-2000-xxx-LS-560. Position of all mounting holes, connectors, as well as outer dimensions in case of 280mm-long PrevaLED Linear SLIM LEP-630-xxx-LS, LEP-1000-xxx-LS and LEP-2000-xxx-LS are the same. Please find below the technical sketch: Tc2 Tc LEP Linear Slim, 2012/ September page 4 of 11 The only difference between LEP-2000-xxx-LS and LEP-1000-xxx-LS are the two dimensions, showed below for LEP-2000-xxx-LS: All dimensions: mm General tolerances: +/-0.15 if not specified Position of all mounting holes, connectors, as well as, outer dimension in case of PrevaLED Linear SLIM LEP-2000-xxx-LS-560 and LEP-2000-xxx-LS-560 are the same. LEP-2000-xxx-LS-560 Tc2 Tc2 Tc Tc As in case of the 280mm-long module the only difference between LEP-2000-xxx-LS-560 and LEP-4000xxx-LS-560 consists in the following two dimensions, due to different LED package. Please find below the LEP-4000-xxx-LS-560 dimensions: All dimensions: mm General tolerances: +/-0.15 if not specified LEP Linear Slim, 2012/ September page 5 of 11 Cable For connecting the module OSRAM recommend to use an AWG 20 (0.5mm²) solid wire cable, max diameter for cable inclusive insulation ~2(+/-0,05)mm. Electrical Connection On module level + - + - String configuration 280mm: 2 x 33 LED’s for 630 and 1000lm 280mm: 2 x 30 LED’s for 2000lm 560mm: 4 x 33 LED’s for 2000lm 4 x 30 4000lm Module to ECG ECG + - + module + - + - + module + - Module to Module ECG Example for 2 modules LEP Linear Slim, 2012/ September page 6 of 11 + module + - Current & Power for different parallel module configuration LEP-630-830-LS LEP-1000-830-LS LEP-2000-830-LS Number of modules Current Power* Current Power* Current Power* 1 2 3 4 5 6 7 8 116 mA** 174 mA** 232 mA 250 mA 348 mA 406 mA 464 mA 11.8 W** 17.7 W** 23.6 W 29.5 W 35.4 W 41.3 W 47.2 W 204 mA 306 mA 408 mA 510 mA** 612 mA** 714 mA** 816 mA** 19.0 W 28.5 W 38.5 W 47.5 W** 57.0 W** 66.5 W** 77.0 W** 213 mA 426 mA 639 mA** 852 mA** - 18.3 W 36.6 W 54.9 W** 73.2 W** - LEP-640-840-LS Number of modules 1 LEP-1000-840-LS LEP-1000-850-LS LEP-2000-840-LS Current Power* Current Power* Current Power* Current Power* - - - - - - 208 mA 17.8 W 2 108 mA** 10.8 W** 180 mA 16.6 W 180 mA 16.6 W 416 mA 35.6 W 3 162 mA** 16.2 W** 270 mA 24.9 W 270 mA 24.9 W 624 mA** 53.4 W** 4 216 mA 21.6 W 360 mA 33.2 W 360 mA 33.2 W 832 mA** 71.2 W** 5 270 mA 27.0 W 450 mA** 41.5 W** 450 mA** 41.5 W** 6 324 mA 32.4 W 540 mA** 49.8 W** 540 mA** 49.8 W** 7 378 mA 37.8 W 630 mA** 58.1 W** 630 mA** 58.1 W** 8 432 mA 43.2 W 720 mA** 66.4 W** 720 mA** 66.4 W** LEP-2000-830-LS-560 LEP-4000-830-LS-560 Number of modules Current Power* 1 204 mA 19.0 W 426 mA 36.6 W 2 3 408 mA 612 mA** 38.0 W 57.0 W** 852 mA** 73.2 W** 4 816 mA** 76.0 W** LEP-2000-840-LS-560 Current Power* LEP-4000-840-LS-560 Number of modules Current Power* Current Power* 1 2 180 mA 360 mA 16.5 W 33.0 W 416 mA 832 mA** 35.7 W 71.4 W** 3 540 mA** 49.5 W** 4 720 mA** 66.0 W** * Electrical Power of modules @ Tc 65°C ** Target configuration with upcoming brightness bin LEP Linear Slim, 2012/ September page 7 of 11 Installation notes The luminaire manufacturer is responsible for providing the required clearances and creepage distances and also for the protection against electrical shock, especially for the line and load wires according to EN 60598. Metal reflector must be earthed. Distance between the module edge and the nearest conductive path on PrevaLED Linear SLIM module is 3,1mm (around M3 holes) and 2,9mm (around M4 holes) incl. tolerances. CTI value for the module insulation layer ≥ 600 (basis insulation). All values are in mm. Red – keep-out area, green – available space for mounting. Please consider the creepage and clearance distance values according to DIN60598-1. This value equals 1.5mm for max output voltage of 250V in case of OTpDALI45/220-240/450LS and CTI≥ 600 (basis insulation). This value is valid, if the module is used within luminaire of min. IP20 or higher protection class. To keep specified creepage distance of 1.5mm following screw and insulation washer standards are recommended (please see the next page): LEP Linear Slim, 2012/ September page 8 of 11 Creepage with specified washer,mm Creepage distance acc. to DIN60598-1: basis insulation CTI>=600 and Umax=250V, mm 1.5 Washer standard 3.1 Screw standard In the area of M3 screw Distance between module edge and keep-out area, mm Location on the module ISO 4762 Cylinderhead No washer needed >1.5 ISO 7984 No washer needed >1.5 ISO 7380 Panhead No washer needed >1.5 DIN125/ISO7089 2.7 DIN9012 3.85 DIN9012 2.8 DIN 125/ISO7089 1.65 DIN 920 Flathead Narrow In the area of M4 screw 2.9 1.5 ISO 7380 Panhead ISO 4762/ DIN 912 Cylinderhead DIN9012 2.99 DIN125/ISO7089 1.84 Along the long side 2.9 1.5 - - - Along the short side 2.7 1.5 - - - If the listed components are used, all requirements of DIN60598-1 are fulfilled. Clamps and clips can be applied taking into consideration clearance and creepage distances according to the drawing and the table. LEP Linear Slim, 2012/ September page 9 of 11 Safety Information The LED module itself and all its components must not be mechanically stressed. When handling the module without use of mountain screws avoid excessive force on the cover as it may be separated from the PCB. The integrated mounting and locking mechanism on the cover of the module is intended to center and lock a reflector. Excessive force on this mechanism may cause permanent damage to the module. The modules are intended for operation only with matching OPTOTRONIC® of OTp series. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information") OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation. Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Pay attention to standard ESD precautions when installing the module. Important information on photobiological safety is available in the application guide. Assembly Information For optimum cooling a thermally conducting layer should be applied between module and heat sink. Further details and recommendation for mounting can be found in the application guide. Ordering codes Product group PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim PrevaLED Linear Slim OPTOTRONIC OPTOTRONIC *) EAN: Ordering number per single PRODUCT Product name EAN * S-Unit ** LEP-2000-830-LS LEP-2000-840-LS LEP-1000-830-LS LEP-1000-840-LS LEP-1000-850-LS LEP-630-830-LS LEP-630-840-LS LEP-4000-830-LS560 LEP-4000-840-LS560 LEP-2000-830-LS560 LEP-2000-840-LS560 OTp DALI 80/220-240/350 LS OTp DALI 80/220-240/700 LS 4008321 978929 4008321 978905 4008321 978882 4008321 978868 4008321 816108 4008321 978844 4008321 978820 4008321 816085 4008321 816061 4008321 816047 4008321 816023 4008321 824882 4008321 824905 16 16 16 16 16 16 16 16 16 16 16 25 25 **) S-Unit: products per shipping unit Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves. LEP Linear Slim, 2012/ September page 10 of 11 Sales and Technical Support OSRAM GmbH Hellabrunner Strasse 1 D - 81536 München Deutschland www.osram.com +49 89 6213-0 Sales and technical support is given by the local OSRAM subsidiaries. On our world wide homepage all OSRAM subsidiaries are listed with complete address and phone numbers. Related and Further Information PrevaLED® Application Guide www.osram.com/prevaled-linear OPTOTRONIC® Technical Guide www.osram.com/ecg-downloads OPTOTRONIC® Data Sheets http://catalog.myosram.com LEP Linear Slim, 2012/ September page 11 of 11