pdf

OSRAM
PrevaLED® COIN 111 G2
Technical Information
Benefits
 Fits in most existing R111 traditional luminaires
 Easy & fast design-in for luminaire manufacturers
 Narrow beam angles, 24o and 40o
 High lumen output for HID lamp replacement
 Flexibility through 3 lumen packages and 3 CCTs
Applications
For Spot & Track-light in:
 Chain stores, Retail shops
 Shopping malls
 Exhibition halls
 Museums
Technical Operating Data
Product
** (made to order)
Nominal Nominal Radiance
Color
If [mA]
Power Angle [°] Temp. [K]
[W]
Nominal Flux
Lum.
[lm]
Intensity
[cd]
Typ.
CRI
[Ra]
Efficacy
[lm/W]
PL-CN111-G2-1500-927-24D **
700
17.3
24
2700
1430
5150
92
82
PL-CN111-G2-1500-930-24D
700
17.3
24
3000
1430
5150
92
82
PL-CN111-G2-1500-940-24D
700
17.3
24
4000
1560
5620
92
90
PL-CN111-G2-1500-927-40D **
700
17.3
40
2700
1430
2570
92
82
PL-CN111-G2-1500-930-40D
700
17.3
40
3000
1430
2570
92
82
PL-CN111-G2-1500-940-40D
700
17.3
40
4000
1560
2810
92
90
PL-CN111-G2-2400-827-24D **
700
21.6
24
2700
2100
7560
83
97
PL-CN111-G2-2400-830-24D
700
21.6
24
3000
2300
8280
83
106
PL-CN111-G2-2400-840-24D
700
21.6
24
4000
2500
9000
83
115
PL-CN111-G2-2400-827-40D **
700
21.6
40
2700
2100
3780
83
97
PL-CN111-G2-2400-830-40D
700
21.6
40
3000
2300
4140
83
106
PL-CN111-G2-2400-840-40D
700
21.6
40
4000
2500
4500
83
115
PL-CN111-G2-3600-827-24D **
1050
32.1
24
2700
3000
10800
83
93
PL-CN111-G2-3600-830-24D
1050
32.1
24
3000
3300
11880
83
102
PL-CN111-G2-3600-840-24D
1050
32.1
24
4000
3600
12960
83
112
PL-CN111-G2-3600-827-40D **
1050
32.1
40
2700
3000
5400
83
93
PL-CN111-G2-3600-830-40D
1050
32.1
40
3000
3300
5940
83
102
PL-CN111-G2-3600-840-40D
1050
32.1
40
4000
3600
6480
83
112
Ta=25oC
5oC.
All Data are related to the entire module (Testing at steady status.
±
Testing current tolerance: ±5%)
Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily
correspond to the actual parameters of each single product which could differ from the typical data
Technical Features
 Module ready to use with two cables:
 Color tolerance: <MacAdam 4 SDCM
- red cable (+ pole)
 Max. tc temperature of 85oC (see IEC/PAS 62717)
- black cable (- pole)
 L70B50 >= 50,000 hours at tp=75oC
 Cable length 500 mm, cable Ø 1.6 mm/AWG 22
 Color Rendering index CRI (Ra) typ. 92 for PLCN111-1500 and typ. 83 for PL-CN111-2400 & PLCN111-3600
 Best efficacy in combination with OSRAM
OPTOTRONIC® constant current control gears
 Modul efficacy up to 115 lm/W
PrevaLED® COIN 111 G2 – 22.06.2015
Page 1
OSRAM
Minimum and Maximum Ratings
Product
Operating Temperature
Storage Temperature
Max. Current
At tc-Point [C°]*
[C°]*
[mA]*
PL-CN111-G2-1500-927-24D
-20 … 85
-40 … 80
735
PL-CN111-G2-1500-930-24D
-20 … 85
-40 … 80
735
PL-CN111-G2-1500-940-24D
-20 … 85
-40 … 80
735
PL-CN111-G2-1500-927-40D
-20 … 85
-40 … 80
735
PL-CN111-G2-1500-930-40D
-20 … 85
-40 … 80
735
PL-CN111-G2-1500-940-40D
-20 … 85
-40 … 80
735
PL-CN111-G2-2400-827-24D
-20 … 85
-40 … 80
735
PL-CN111-G2-2400-830-24D
-20 … 85
-40 … 80
735
PL-CN111-G2-2400-840-24D
-20 … 85
-40 … 80
735
PL-CN111-G2-2400-827-40D
-20 … 85
-40 … 80
735
PL-CN111-G2-2400-830-40D
-20 … 85
-40 … 80
735
PL-CN111-G2-2400-840-40D
-20 … 85
-40 … 80
735
PL-CN111-G2-3600-827-24D
-20 … 85
-40 … 80
1100
PL-CN111-G2-3600-830-24D
-20 … 85
-40 … 80
1100
PL-CN111-G2-3600-840-24D
-20 … 85
-40 … 80
1100
PL-CN111-G2-3600-827-40D
-20 … 85
-40 … 80
1100
PL-CN111-G2-3600-830-40D
-20 … 85
-40 … 80
1100
PL-CN111-G2-3600-840-40D
-20 … 85
-40 … 80
1100
*) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED Module.
Exceeding maximum ratings for operating current will cause hazardous overload and will likely destroy the LED Module.
The temperature of the LED module must be measured at the tc-point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature
sensitive label. For exact location of the tc-point see drawing below.
Dimensions & Mechanical data
Dimension (mm)
Ø111 x 46 (H)
Mounting
AR111 similar
Optics
PC lens
Weight
290 grams
PrevaLED® COIN 111 G2 – 22.06.2015
Page 2
OSRAM
Standard Compliance
Safety
EN 62031, IEC 60598-1
EMC
EN 55015, EN 61547
Eye Security
EN 62471
Ingress Production
Dry Location, IP 20
Environment
RoHS
Electrical Operating Conditions
PL-CN111-G2-1500XXX-XXD
PL-CN111-G2-2400XXX-XXD
PL-CN111-G2-3600XXX-XXD
108%
106%
104%
102%
100%
98%
PL-CN111-G2-1500-XXXXXD
PL-CN111-G2-2400-XXXXXD
PL-CN111-G2-3600-XXXXXD
36
34
32
Typical voltage (V)
Flux normalized at Tp=70℃
110%
30
28
26
24
22
96%
20
94%
0
0
15
30
45
60
75
90
15
30
60
T case (℃)
T case (℃)
75
90
34
100%
32
80%
60%
PL-CN111-G2-1500-XXXXXD
PL-CN111-G2-2400-XXXXXD
PL-CN111-G2-3600-XXXXXD
40%
20%
Typical voltage (V)
120%
Typical If=175mA
30
28
26
PL-CN111-G2-1500XXX-XXD
24
PL-CN111-G2-2400XXX-XXD
22
PL-CN111-G2-3600XXX-XXD
20
0%
0
150
300
450
600
750
105
Tc=70℃
Tc=70℃
Flux normalized at rated current
45
105
900
1050 1200 1350
0
200
If (mA)
PrevaLED® COIN 111 G2 – 22.06.2015
400
600
If (mA)
Page 3
800
1000
1200
OSRAM
Safety Information
 The LED module itself and all its components must not be mechanically stressed.
 Assembly must not damage or destroy conducting paths on the circuit board.
 To avoid mechanical damage to the connecting cables, the module should be attached securely to the intended
substrate. Heavy vibration should be avoided.
In order to drive OSRAM LED-Modules safely, it is absolutely necessary to operate them with an electronically
stabilised power supply protecting against short circuits, overload and overheating.
To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark
and be ENEC certified. The declarations of conformity must include the following standards:
CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384.
Also check for the mark of an independent authorized certification institute.
Please see the relevant brochure for more detailed information (see "Related and Further Information").
OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation.
 Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety
standards. Only qualified personnel should be allowed to perform installations.
 Correct electrical polarity needs to be obsered. Wrong polarity will destory the module and will result in no light
emission.
 Pay attention to standard ESD precautions when installing the module.
 The module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion.
 Damage by corrosion will not be honored as a materials defect claim. It is the user's responsibility to provide suitable
protection against corrosive agents such as moisture and condensation and other harmful elements.
 If the IP rating of the fixture should be higher than IP20, the design of the housing should be according to the IP standards
in the application.
 Pay attention not to exceed the maximum operation temperature at tc point when the modules are used in enclosed
environment.
PrevaLED® COIN 111 G2 – 22.06.2015
Page 4
OSRAM
Ordering Guide
Product Name
Product Code
Product Number
(EAN10)
Product Number
(EAN40)
Piece per box
PrevaLED® COIN 111-G2
PL-CN111-G2-1500-927-24D
4052899323735
4052899323742
12
PrevaLED® COIN 111-G2
PL-CN111-G2-1500-930-24D
4052899323797
4052899323803
12
PrevaLED® COIN 111-G2
PL-CN111-G2-1500-940-24D
4052899323810
4052899323827
12
PrevaLED® COIN 111-G2
PL-CN111-G2-1500-927-40D
4052899323834
4052899323841
12
PrevaLED® COIN 111-G2
PL-CN111-G2-1500-930-40D
4052899323858
4052899323865
12
PrevaLED® COIN 111-G2
PL-CN111-G2-1500-940-40D
4052899323872
4052899323889
12
PrevaLED® COIN 111-G2
PL-CN111-G2-2400-827-24D
4052899323896
4052899323902
12
PrevaLED® COIN 111-G2
PL-CN111-G2-2400-830-24D
4052899323919
4052899323926
12
PrevaLED® COIN 111-G2
PL-CN111-G2-2400-840-24D
4052899323933
4052899323940
12
PrevaLED® COIN 111-G2
PL-CN111-G2-2400-827-40D
4052899323957
4052899323964
12
PrevaLED® COIN 111-G2
PL-CN111-G2-2400-830-40D
4052899323971
4052899323988
12
PrevaLED® COIN 111-G2
PL-CN111-G2-2400-840-40D
4052899323995
4052899324008
12
PrevaLED® COIN 111-G2
PL-CN111-G2-3600-827-24D
4052899324015
4052899324022
12
PrevaLED® COIN 111-G2
PL-CN111-G2-3600-830-24D
4052899324039
4052899324046
12
PrevaLED® COIN 111-G2
PL-CN111-G2-3600-840-24D
4052899324053
4052899324060
12
PrevaLED® COIN 111-G2
PL-CN111-G2-3600-827-40D
4052899324077
4052899324084
12
PrevaLED® COIN 111-G2
PL-CN111-G2-3600-830-40D
4052899324091
4052899324107
12
PrevaLED® COIN 111-G2
PL-CN111-G2-3600-840-40D
4052899324121
4052899324138
12
Sales and Technical Support
OSRAM Asia Pacific
30th Floor, China Resource Building,
26 Harbour Road, Wanchai, Hong Kong
Sales and technical support is given by the local
OSRAM subsidiaries. Complete subsidiaries
listing is available at OSRAM homepage.
+852 3652 5678
www.osram.com
PrevaLED® COIN 111 G2 – 22.06.2015
Page 5
OSRAM
Application Note
OTe 20/700 PC
OTe 20/700 TE
OTe 35/700 SD
OTe 35/700 PC
OTe 35/700 TE
OTe 35/1A TE
OTe 25 CS
OTe 35 CS
OTe 50 CS
OTe 25 PC
Dimming
PC
TE
SD
PC
TE
TE
N.A
N.A
N.A
PC
Drivers
Modules
Typ.
Current [mA]
Recommended OPTOTRONIC® devices
PL-CN111-G2-1500
700
PL-CN111-G2-2400
700
PL-CN111-G2-3600
1050
  
  


 



B B A B B B A A A B
Connection Type
Driver Availability
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Reference Connection Diagrams
CAUTION
 The following diagrams are for reference only.
 Please refer to Instruction Sheet of power supply/ dimmer/ controller for details.
 Disconnected from mains supply before wiring work.
 Wrong polarity will destroy the module and result in no light emission.
Type A: 1-to-1 connection
L
220-240V ac
N
PrevaLED® COIN 111 G2 – 22.06.2015
Constant Current
Power Supply
Page 6
+
-
Yes
Jan
2014
OSRAM
Type B: 1-to-1 connection with Phase Cut/ Trailing Edge dimming
Phase Cut Dimmer
L
220-240V ac
N
Phase cut dimmable *
Constant Current
Power Supply
+
-
Remark: - 1pc OTe PC driver for 1pc PL-CN111-G2 @700mA or 1050mA
- Dimming by reduce output current
* Trailing Edge dimmable OT shall work with trailing edge dimmer.
PrevaLED® COIN 111 G2 – 22.06.2015
Page 7